-
Verwalten und Überwachen mit Citrix Application Delivery Management
-
Sichere Verkehrsbeschleunigung
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Routing-Beispiele
Die folgenden Beispiele veranschaulichen die Konfiguration von Cisco-Routern für die in gezeigten lokalen und Remotesites: Virtuelles Inline-Beispiel. Zur Veranschaulichung der Integritätsüberwachung umfasst die Konfiguration für den lokalen Standort die Integritätsüberwachung, die Konfiguration für den Remotestandort jedoch nicht.
Hinweis: Die Konfiguration für den lokalen Standort setzt voraus, dass bereits ein Ping-Monitor konfiguriert wurde.
Die Beispiele entsprechen der Cisco IOS CLI. Sie sind möglicherweise nicht auf Router anderer Anbieter anwendbar.
Lokaler Standort, Gesundheitsprüfung aktiviert:
``` pre codeblock ! ! For health-checking to work, do not forget to start ! the monitoring process. ! ! Original configuration is in normal type. ! appliance-specific configuration is in bold. ! ip cef ! interface FastEthernet0/0 ip address 10.10.10.5 255.255.255.0 ip policy route-map client_side_map ! interface FastEthernet0/1 ip address 172.68.1.5 255.255.255.0 ip policy route-map wan_side_map ! interface FastEthernet1/0 ip address 192.168.1.5 255.255.255.0 ! ip classless ip route 0.0.0.0 0.0.0.0 171.68.1.1 ! ip access-list extended client_side permit ip 10.10.10.0 0.0.0.255 10.16.20.0 0.0.0.255 ip access-list extended wan_side permit ip 10.16.20.0 0.0.0.255 10.10.10.0 0.0.0.255 ! route-map wan_side_map permit 20 match ip address wan_side !- Now set the appliance as the next hop, if it’s up. set ip next-hop verify-availability 192.168.1.200 20 track 123 ! route-map client_side_map permit 10 match ip address client_side set ip next-hop verify-availability 192.168.1.200 10 track 123
Remote-Standort (keine Integritätsprüfung):
``` pre codeblock
! This example does not use health-checking.
! Remember, health-checking is always recommended,
! so this is a configuration of last resort.
!
!
ip cef
!
interface FastEthernet0/0
ip address 20.20.20.5 255.255.255.0
ip policy route-map client_side_map
!
interface FastEthernet0/1
ip address 171.68.2.5 255.255.255.0
ip policy route-map wan_side_map
!
interface FastEthernet1/0
ip address 192.168.2.5 255.255.255.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 171.68.2.1
!
ip access-list extended client_side
permit ip 10.16.20.0 0.0.0.255 10.10.10.0 0.0.0.255
ip access-list extended wan_side
permit ip 10.10.10.0 0.0.0.255 10.16.20.0 0.0.0.255
!
route-map wan_side_map permit 20
match ip address wan_side
set ip next-hop 192.168.2.200
!
route-map client_side_map permit 10
match ip address client_side
set ip next-hop 192.168.2.200
!_
<!--NeedCopy-->
Jedes der obigen Beispiele wendet eine Zugriffsliste auf eine Routenkarte an und fügt die Routenkarte an eine Schnittstelle an. Die Zugriffslisten identifizieren den gesamten Datenverkehr, der an einem beschleunigten Standort anfängt und an der anderen beendet wird (eine Quell-IP von 10.10.10.0/24 und Ziel 20.20.20.0/24 oder umgekehrt). Details zu Zugriffslisten und Routenkarten finden Sie in der Dokumentation Ihres Routers.
Diese Konfiguration leitet den gesamten übereinstimmenden IP-Datenverkehr an die Appliances um. Wenn Sie nur TCP-Datenverkehr umleiten möchten, können Sie die Zugriffslisten-Konfiguration wie folgt ändern (nur die Konfiguration der Remote-Seite wird hier gezeigt):
pre codeblock
!
ip access-list extended client_side
permit tcp 10.16.20.0 0.0.0.255 10.10.10.0 0.0.0.255
ip access-list extended wan_side
permit tcp 10.10.10.0 0.0.0.255 10.16.20.0 0.0.0.255
!
<!--NeedCopy-->
Beachten Sie, dass für Zugriffslisten keine gewöhnlichen Masken verwendet werden. Platzhaltermasken werden stattdessen verwendet. Beachten Sie, dass beim Lesen einer Platzhaltermaske in Binärdatei 1 als egal-Bit betrachtet wird.
Teilen
Teilen
In diesem Artikel
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.