Product Documentation

To configure ShareFile settings

Feb 27, 2014
  1. On the Home tab, in ShareFile LB, click Configure.
  2. On the Setup Load Balancing for ShareFile page, do the following:
    1. Under ShareFile Configuration, in Name, type a name for the load balancing server.
    2. In IP Address, type the IP address of the ShareFile server or the StorageZones Connector.
    3. Enable Sharefile Data and StorageZone Connector for Network File Shares/SharePoint and then click Continue.
  3. Under Certificates, do one of the following:
    1. Click Choose Certificate and then in Certificate, select the certificate.
    2. Click Install Certificate and then in Choose Certificate, click Browse. Select Local to navigate to the certificate on your computer. Select Appliance to navigate to the certificate on the NetScaler appliance.

      In Choose Key, repeat the preceding instructions to navigate to the private key for the certificate.

    3. Click Use Test Certificate and then in Certificate FQDN, type the fully qualified domain name (FQDN) that is in the certificate.
  4. In ShareFile StorageZone Controller Configuration, under Add New StorageZone Controller, do the following:
    1. In StorageZone Controller IP Address, enter the IP address of the StorageZone Controller. You can add multiple IP addresses by clicking the plus (+) sign and entering the IP address for each server.
    2. In Port, type the port number.
    3. In Protocol, select http or https
  5. Click Create and then click Done.
  6. In LDAP Authentication Settings, do one of the following:
    1. Click Choose LDAP and then select a server from the list.
    2. Click Configure New and then configure LDAP server settings.
      Important: If you have an existing LDAP server configured on the appliance, you cannot create a new LDAP server by using integrated XenMobile configuration. You can create additional LDAP authentication policies by using the configuration utility.
  7. Click Continue and then click Done.