ADC

Points to Consider before Configuring DS-Lite

Consider the following points before configuring DS-Lite on a NetScaler appliance:

  1. You must understand the different components of DS-Lite, described in RFC 6333.

  2. A DS-lite configuration on a NetScaler appliance uses the LSN commands sets. In a DS-Lite configuration, the LSN client entity specifies the IPv6 address or IPv6 network address or ACL6 rules for identifying the traffic from the B4 device. A DS-Lite configuration also includes an IPv6 profile, which specifies the IPv6 address AFTR component on a NetScaler appliance. For more information on NetScaler LSN feature, see Large Scale NAT.

  3. For a DS-Lite configuration, the NetScaler appliance supports LSN for IPv4 packets that belong to one of the following protocols only. The NetScaler appliance drops IPv4 packets belonging to other protocols:

    • TCP
    • UDP
    • ICMP
  4. The NetScaler appliance supports the following ALGs DS-Lite:

    • ICMP
    • FTP
    • TFTP
    • Session Initiation Protocol (SIP)
    • Real Time Streaming Protocol (RTSP)
Points to Consider before Configuring DS-Lite