ADC

Support for Azure Key Vault

The NetScaler appliance integrates with external HSMs (SafeNet and Thales) for on-premises deployments. For cloud deployments, the ADC appliance integrates with Azure Key Vault. The appliance stores its private keys in the Key Vault for ease of management and security of the private key in the public cloud domain. You no longer have to store and manage keys in different locations for ADC appliances deployed across multiple data centers and cloud providers.

Using ADC with the Azure Key Vault Premium pricing tier, which provided HSM backed keys, provides FIPS 140-2 level 2 compliance.

Azure Key Vault is a standard offering from Microsoft. For more information about Azure Key Vault, see the Microsoft Azure documentation.

Note:

The NetScaler integration with Azure Key Vault is supported with the TLS 1.3 protocol.

Architecture overview

Azure Key Vault is a service for storing secrets securely in the Azure cloud. By storing your keys in the Azure Key Vault, you reduce the chances of keys being stolen. Once the Key Vault is set up, you can store your keys in it. Configure virtual servers on the ADC appliance to perform private key operations in the Key Vault. The ADC appliance accesses the key for each SSL handshake.

The following diagram illustrates the process to get an access token from the Azure Active Directory after authentication. This token is used with REST API calls for crypto operations using private keys.

Get access token

The following diagram shows a typical RSA handshake. The client key exchange (CKE) message that is encrypted using the public key is decrypted using the private key stored in the Key Vault.

Key Vault handshake

In an ECDHE handshake, the server key exchange (SKE) message sent by the NetScaler appliance is signed by using the private key stored in the Key Vault.

Prerequisites

  1. You must have an Azure subscription.

  2. (Optional) Install Azure CLI on a Linux machine. For instructions, see the Azure documentation https://docs.microsoft.com/en-us/cli/azure/install-azure-cli-apt?view=azure-cli-latest.

  3. Complete the configuration on the Azure portal before configuring entities on the ADC appliance.

Configure the ADC Azure Key Vault integration

First perform the configuration on the Azure portal followed by the configuration on the ADC appliance.

Perform the following steps on the Azure portal

The following flowchart shows the high-level flow for configuration required on the Azure portal.

Steps on the Azure portal

  1. Create app and service principal in Azure Active Directory.
  2. Create Key Vault in a resource group.
  3. Configure the app and service principal to perform sign and decrypt operations on the Key Vault.
  4. Create keys in the Key Vault using one of the following ways:

    1. By importing a key file.
    2. By generating a certificate.

For information about the commands to configure the preceding steps, see the Azure documentation at https://docs.microsoft.com/en-us/azure/active-directory/develop/app-objects-and-service-principals.

Perform the following steps on the ADC appliance

The following flowchart shows the high-level flow for configuration required on the ADC appliance.

Steps on the ADC appliance

  1. Configure a DNS server.
  2. Configure root certificates to verify the certificates presented by Azure.
  3. Create an Azure application.
  4. Create an Azure Key Vault entity.
  5. Create an HSM key.
  6. Create a certificate-key pair.
  7. Bind the certificate-key pair to a virtual server.

Configure a DNS server

A DNS server is required for the name resolution of Key Vault host and Azure Active Directory end point.

To configure a DNS server by using the CLI

At the command prompt, type:

add dns nameserver <IP address>
<!--NeedCopy-->

Example:

add dns nameserver 192.0.2.150
<!--NeedCopy-->

To configure a DNS server by using the GUI

  1. Navigate to Traffic Management > DNS > Name Servers. Click Add.

    Add DNS name server

  2. Enter values for the following parameters:
    • IP Address - IP address of an external name server or, if the Local parameter is set, IP address of a local DNS server (LDNS).
    • Protocol - Protocol used by the name server. UDP_TCP is not valid if the name server is a DNS virtual server configured on the appliance.
  3. Click Create.

Add and bind a root certificate

Download the root certificates of the certificate presented by Azure Key Vault https://<vault_name>.vault.azure.net and Azure Active Directory (AAD) https://login.microsoftonline.com and load it on the ADC appliance. These certificates are required to validate the certificate presented by Azure Key Vault and AAD. Bind one or more certificates to the CA certificate group ns_callout_certs.

To add a root certificate by using the CLI

At the command prompt, type:

add ssl certkey <certkeyname> -cert <certname>
bind ssl caCertGroup <caCertGroupName> <certkeyName>
<!--NeedCopy-->

Example: In the following example, the root certificate presented by Azure Key Vault and AAD is the same.

add ssl certKey rootcert -cert RootCyberTrustRoot.crt
bind ssl cacertGroup ns_callout_certs  rootcert
<!--NeedCopy-->

To add a root certificate by using the GUI

  1. Navigate to Traffic Management > SSL > Certificates > CA Certificates.

  2. Enter values for the following parameters:
    • Certificate-key pair name
    • Certificate file name

    CA certificate parameters

  3. Click Install.

  4. Navigate to Traffic Management > SSL > CA Certificates Group.

  5. Select ns_callout_certs and click Show Bindings.

  6. Click Bind.

  7. Select the CA certificate created earlier and click Select.

  8. Click Bind, and then click Close.

Configure an Azure application

The Azure application entity contains the credentials required to authenticate to Azure Active Directory and obtain the access token. That is, to get authorization access to Key Vault resources and APIs, add the Azure Application ID, secret (password) and tenant ID on the ADC appliance.
When configuring the Azure Application entity using the CLI, you must enter the password. If you use the GUI, the Azure application entity contains the credentials required to authenticate to Azure Active Directory and obtain the access token.

To configure an Azure application by using the CLI

From release 13.0-61.x, a parameter, vaultResource, is added to the add azure application command to get the domain of the resource group before the access token is granted to the application. This parameter is added because the domain name might be different for different regions. For example, the domain might be vault.azure.net or vault.usgov.net.

At the command prompt, type:

add azure application <name> -clientID <string> -clientSecret -tenantID <string> -vaultResource <string> [-tokenEndpoint <URL>]
show azure application
<!--NeedCopy-->

Example:

add azure application app10 -clientiD 12345t23aaa5 -clientsecret csHzOoEzmuY= -vaultResource example.vault.azure.net -tenantID 33583ee9ca5b
 Done
> sh azure application app10
1)  Name:  app10             ClientID:  12345t23aaa5
    TokenEndpoint:  "https://login.microsoftonline.com/33583ee9ca5b/"
    TenantID:  33583ee9ca5b  VaultResource:  example.vault.azure.net
 Done

<!--NeedCopy-->

To configure an Azure application by using the GUI

  1. Navigate to Traffic Management > SSL > Azure > Application.

  2. In the details pane, click Add.

  3. Enter values for the following parameters:

    • Name – Name for the application object on the NetScaler appliance.
    • Client ID – Application ID that is generated when an application is created in Azure Active Directory using either the Azure CLI or the Azure portal (GUI).
    • Client Secret – Password for the application configured in Azure Active Directory. The password is specified in the Azure CLI or generated in the Azure portal (GUI).
    • Tenant ID – ID of the directory inside Azure Active Directory in which the application was created.
    • Vault Resource - Vault resource for which access token is granted. Example vault.azure.net.
    • Token End point – URL from where the access token can be obtained. If the token end point is not specified, the default value is https://login.microsoftonline.com/<tenant id>.

    Azure application parameters

Configure Azure Key Vault

Create an Azure Key Vault object on the ADC appliance.

To configure Azure Key Vault by using the CLI

At the command prompt, type:

add azure keyVault <name> -azureVaultName <string> -azureApplication
       <string>
show azure keyvault
<!--NeedCopy-->

Example:

add azure keyvault kv1 -azureapplication app10 -azurevaultName pctest.vault.azure.net
> sh azure keyVault
1)  Name:  kv1               AzureVaultName:  pctest.vault.azure.net
  AzureApplication:  app10  State:  "Access token obtained"
 Done
<!--NeedCopy-->

The following table lists the different values that the state of the Azure Key Vault can take along with a brief description about each state.

State Description
Created Initial state of the Key Vault object. Authentication has not been attempted.
Could not reach token end point Indicates one of the following: DNS server not configured, issuer certificate not bound to a CA certificate group, or network issues.
Authorization failed Incorrect application credentials.
Token parse error Response from Azure Active Directory is not in the expected format.
Access token obtained Successfully authenticated by Azure Active Directory.

To configure the Azure Key Vault by using the GUI

  1. Navigate to Traffic Management > SSL > Azure > Key Vault.

  2. Enter values for the following parameters:

    • Name - Name for the Key Vault.
    • Azure Key Vault Name - Name of the Key Vault configured in Azure cloud using either the Azure CLI or the Azure portal (GUI) with domain name.
    • Azure Application Name - Name of the Azure Application object created on the ADC appliance. The Azure Application object with this name is used for authentication with Azure Active Directory.

    Azure Key Vault parameters

Add HSM key

Storing your private key in the HSM provides FIPS 140-2 level 2 compliance.

To add an HSM key by using the CLI

At the command prompt, type:

add ssl hsmKey <hsmKeyName> [-hsmType <hsmType>] [-key <string> |
       -serialNum <string>] {-password } [-keystore <string>]
<!--NeedCopy-->

Example:

add ssl hsmKey h1 -keystore kv1 -key san15key -hsmType KEYVAULT


> sh ssl hsmKey h1
    HSM Key Name: h1       Type: KEYVAULT
    Key: san15key
    Key store: kv1
    State: “Created”
 Done
<!--NeedCopy-->

The following table lists the different values that the state of an HSM key can take along with a brief description about each state.

State Description
Created The HSM key is added on the ADC appliance. A key operation is not yet attempted.
Access token unavailable Access token not available when key operation was attempted.
Unauthorized Configured Azure application does not have permission to perform the key operation.
Does not exist The key does not exist in the Azure Key Vault.
Unreachable The Key Vault host is not reachable on the network.
Marked down The HSM key is marked DOWN on the ADC appliance due to threshold errors during key operation.
Key operations successful Success response received from the Key Vault for key operation.
Key operations failed Failure response received from Key Vault for key operation.
Key operation throttled The key operation request is throttled by the Key Vault.

To add an HSM key by using the GUI

  1. Navigate to Traffic Management > SSL > HSM.

  2. Enter values for the following parameters.

    • HSM key name - Name of the key.
    • HSM type - Type of HSM.
    • Key store - Name of key store object representing HSM where the key is stored. For example, name of Key Vault object or Azure Key Vault authentication object. Applies only to KEYVAULT type HSM.

    HSM key parameters

  3. Click Add

Add a certificate-key pair

Add a certificate-key pair using the HSM key created earlier.

To add a certificate-key pair by using the CLI

At the command prompt, type:

add ssl certKey <certkeyName> (-cert <string> [-password]) -hsmKey <string>]
show ssl certkey
<!--NeedCopy-->

Example:

add ssl certKey serverrsa_2048 -cert /nsconfig/ssl/san_certs/san15.pem -hsmKey h1
> sh ssl certkey serverrsa_2048
    Name: serverrsa_2048        Status: Valid,   Days to expiration:9483
    Version: 3
    Serial Number: F5CFF9EF1E246022
    Signature Algorithm: sha256WithRSAEncryption
    Issuer:  C=in,O=citrix,CN=ca
    Validity
        Not Before: Mar 20 05:42:57 2015 GMT
        Not After : Mar 12 05:42:57 2045 GMT
    Certificate Type:   "Server Certificate"
    Subject:  C=in,O=citrix
    Public Key Algorithm: rsaEncryption
    Public Key size: 2048
    Ocsp Response Status: NONE
 Done
<!--NeedCopy-->

To add a certificate-key pair by using the GUI

  1. Navigate to Traffic Management > SSL > Install Certificate (HSM).

  2. Enter values for the following parameters:

    • Certificate-Key Pair Name
    • Certificate File Name
    • HSM Key

    Certificate-key pair parameters

  3. Click Install.

Bind the certificate-key pair to a virtual server

The certificate used for processing SSL transactions must be bound to the virtual server that receives the SSL data.

To bind the SSL certificate-key pair to a virtual server by using the CLI

At the command prompt, type:

bind ssl vserver <vServerName> -certkeyName <certificate-KeyPairName>
show ssl vserver <vServerName>
<!--NeedCopy-->

Example:

bind ssl vserver v1 -certkeyName serverrsa_2048

sh ssl vserver v1

    Advanced SSL configuration for VServer v1:
    DH: DISABLED
    DH Private-Key Exponent Size Limit: DISABLED    Ephemeral RSA: ENABLED      Refresh Count: 0
    Session Reuse: ENABLED      Timeout: 120 seconds
    Cipher Redirect: DISABLED
    ClearText Port: 0
    Client Auth: DISABLED
    SSL Redirect: DISABLED
    Non FIPS Ciphers: DISABLED
    SNI: DISABLED
    OCSP Stapling: DISABLED
    HSTS: DISABLED
    HSTS IncludeSubDomains: NO
    HSTS Max-Age: 0
    HSTS Preload: NO
    SSLv3: ENABLED  TLSv1.0: ENABLED  TLSv1.1: ENABLED  TLSv1.2: ENABLED  TLSv1.3: DISABLED
    Push Encryption Trigger: Always
    Send Close-Notify: YES
    Strict Sig-Digest Check: DISABLED
    Zero RTT Early Data: DISABLED
    DHE Key Exchange With PSK: NO
    Tickets Per Authentication Context: 1

    ECC Curve: P_256, P_384, P_224, P_521

1)  CertKey Name: serverrsa_2048    Server Certificate



1)  Cipher Name: DEFAULT
    Description: Default cipher list with encryption strength >= 128bit
 Done
<!--NeedCopy-->

To bind an SSL certificate-key pair to a virtual server by using the GUI

  1. Navigate to Traffic Management > Load Balancing > Virtual Servers and open an SSL virtual server. Click inside the Certificate section.

    Server certificate

  2. Click the arrow to select the certificate-key pair.

  3. Select the certificate-key pair from the list.

  4. Bind the certificate-key pair to the virtual server.

    Bind certificate to virtual server

Limitations

  • The number of concurrent calls to the Azure Key Vault for key operations is limited. Performance of the ADC appliance depends on the Key Vault limits. For more information see, Microsoft Azure Key Vault documentation.
  • EC keys are not supported.
  • EDT and DTLS protocols are not supported.
  • ADC appliances with Intel Coleto SSL chips are not supported.
  • Clustering and admin partitions are not supported.
  • You cannot update the Azure Application entity, the Azure Key Vault object, and the HSM certificate-key pair after you have added them to the ADC appliance.
  • A certificate bundle with HSM keys is not supported.
  • An error does not appear if the HSM key and certificate do not match. While adding a certificate-key pair, ensure that the HSM key and certificate match.
  • You cannot bind an HSM key to a DTLS virtual server.
  • You cannot sign OCSP requests using a certificate-key pair that is created using an HSM key.
  • You cannot bind a certificate-key pair to an SSL service if the certificate-key pair is created using an HSM key.

FAQ

When integrated with Azure Key Vault, are private keys stored in the ADC appliance memory?

No, private keys are not be stored in ADC appliance memory. For each SSL transaction, the appliance sends a request to Key Vault.

Is the integration FIPS 140-2 level 2 compliant?

Yes, the integrated solution provides FIPS 140-2 Level 2 support.

Which key types are supported?

Only RSA key types are supported.

What key sizes are supported?

1024-bit, 2048-bit, and 4096-bit RSA keys are supported.

Which ciphers are supported?

All ciphers supported on the ADC appliance, including TLSv1.3 ciphers with ECDHE and SHA256 are supported.

Are transactions logged?

The ADC appliance logs each transaction it makes with the Key Vault. Details such as, time, vault IP address, port, success or failure of connection, and errors are logged. The following is a sample SSL log output.

Apr  9 16:35:30 <local0.debug> 10.102.57.30 04/09/2019:16:35:30 GMT  0-PPE-0 : default SSLLOG SSL_HANDSHAKE_SUCCESS 896 0 :  Backend SPCBId 30894 - ServerIP 104.211.224.186 - ServerPort 443 - ProtocolVersion TLSv1.2 - CipherSuite "ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Non-Export 256-bit" - Session New - SERVER_AUTHENTICATED -SerialNumber "200005A75B04365827852D630000000005A75B" - SignatureAlgorithm "sha256WithRSAEncryption" - ValidFrom "Mar 17 03:28:42 2019 GMT" - ValidTo "Mar 17 03:28:42 2021 GMT" - HandshakeTime 40 ms
Apr  9 16:35:30 <local0.debug> 10.102.57.30 04/09/2019:16:35:30 GMT  0-PPE-0 : default SSLLOG SSL_HANDSHAKE_ISSUERNAME 897 0 :  SPCBId 30894 - IssuerName " C=US,ST=Washington,L=Redmond,O=Microsoft Corporation,OU=Microsoft IT,CN=Microsoft IT TLS CA 2"
Apr  9 16:35:30 <local0.debug> 10.102.57.30 04/09/2019:16:35:30 GMT  0-PPE-0 : default SSLLOG SSL_HANDSHAKE_SUBJECTNAME 898 0 :  SPCBId 30894 - SubjectName " CN=vault.azure.net"
<!--NeedCopy-->
Support for Azure Key Vault