ADC

Enabling content filtering

By default, content filtering is enabled on Citrix ADC appliances running the Citrix ADC operating system 8.0 or above. If you are upgrading an existing appliance from an operating system version earlier than 8.0, you must update the licenses before you can use content filtering, and you might need to enable the content filtering feature itself manually.

Enable content filtering by using the CLI

At the command prompt, type the following commands to enable content filtering and verify the configuration:

-  enable ns feature ContentFiltering
-  show ns feature
<!--NeedCopy-->

Example:

> enable ns feature ContentFiltering
 Done
> show ns feature

        Feature                        Acronym              Status
        -------                        -------              ------
 1)     Web Logging                    WL                   ON
 2)     Surge Protection               SP                   OFF
 .
 .
 .
 .
 11)    Http DoS Protection            HDOSP                OFF
 12)    Content Filtering              CF                   ON
 .
 .
 23)    HTML Injection                 HTMLInjection        ON
 24)    Citrix ADC Push                 push                 OFF
 Done
<!--NeedCopy-->

Enable content by filtering by using the GUI

  1. In the navigation pane, expand System, and then select Settings.
  2. In the details pane, click Configure basic features.
  3. In the Configure Basic Features pane, select the Content Filter check box, and then click OK.
Enabling content filtering