ADC

SSO for Basic, Digest, and NTLM authentication

Single Sign-On (SSO) configuration in NetScaler and NetScaler Gateway can be enabled at global level and also per traffic level. By default the SSO configuration is OFF and an administrator can enable the SSO per traffic or globally. From a security point of view, Citrix recommends administrators to turn SSO globally OFF and enable per traffic basis. This enhancement is to make SSO configuration more secure by dishonoring certain type of SSO methods globally.

Note:

From NetScaler feature release 13.0 build 64.35 and above, the following SSO types are dishonored globally.

  • Basic authentication
  • Digest Access authentication
  • NTLM without Negotiate NTLM2 Key or Negotiate Sign

Non-impacted SSO types

The following SSO types are not impacted with this enhancement.

  • Kerberos authentication
  • SAML authentication
  • Form based authentication
  • OAuth bearer authentication
  • NTLM with Negotiate NTLM2 Key or Negotiate Sign

Impacted SSO configurations

Following are the impacted (dishonored) SSO configurations.

Global configurations

set tmsessionparam -SSO ON
set vpnparameter -SSO ON
add tmsessionaction tm_act -SSO ON
add vpn sessionaction tm_act -SSO ON
<!--NeedCopy-->

Per traffic configurations

add vpn trafficaction tf_act http -SSO ON
add tm trafficaction tf_act -SSO ON
<!--NeedCopy-->

You can enable/disable SSO as a whole and cannot modify individual SSO types.

Security measures to be applied

As part of the security measures, security sensitive SSO types are dishonored in the global configuration but are allowed only through a Traffic action configuration. So, if a back-end server expects Basic, Digest, or NTLM without Negotiate NTLM2 Key or Negotiate Sign, the administrator can allow SSO only through the following configuration.

Traffic Action

add vpn trafficaction tf_act  http -SSO ON
add tm trafficaction tf_act -SSO ON
<!--NeedCopy-->

Traffic Policy

add tm trafficpolicy <name> <rule> tf_act
add vpn trafficpolicy <name> <rule> tf-act
<!--NeedCopy-->

Administrator must have an appropriate rule configured for traffic policy to make sure SSO is enabled for only trusted back-end server.

AAA-TM

Scenarios based on global configuration:

set tmsessionparam -SSO ON
<!--NeedCopy-->

Workaround:

add tm trafficaction tf_act -SSO ON
add tm trafficpolicy tf_pol true tf_act
<!--NeedCopy-->

Bind the following traffic policy to all LB virtual server where SSO is expected:

bind lb vserver <LB VS Name> -policy tf_pol -priority 65345
<!--NeedCopy-->

Scenarios based on session Policy configuration:

add tmsessionaction tm_act -SSO ON
add tmsession policy <name> <rule> tm_act
add tm trafficaction tf_act -SSO ON
add tm trafficpolicy tf_pol <same rule as session Policy> tf_act
<!--NeedCopy-->

Points of note:

  • NetScaler AAA user/group for the preceding session policy must be replaced by traffic policy.

  • Bind the following policy to the load balancing virtual servers for the preceding session policy,

bind lb vserver [LB VS Name] -policy tf_pol -priority 65345
<!--NeedCopy-->
  • If a traffic policy with other priority is configured, the preceding command does not serve good.

The following section deals with scenarios based on conflict with multiple traffic policies associated with a traffic:

For a particular TM traffic, only one TM traffic policy is applied. Because of global setting of SSO feature changes, applying an additional TM traffic policy with low priority might not be applicable in case a TM traffic policy with high priority (that does not have required SSO configuration) is already applied. The following section describes method to ensure that such cases are handled.

Consider that the following three traffic policies with higher priority are applied to load balancing (LB) virtual server:

add tm trafficaction tf_act1 <Addition config>
add tm trafficaction tf_act2 <Addition config>
add tm trafficaction tf_act3 <Addition config>

add tm trafficpolicy tf_pol1 <rule1> tf_act1
add tm trafficpolicy tf_pol2 <rule2> tf_act2
add tm trafficpolicy tf_pol3 <rule3> tf_act3

bind lb vserver <LB VS Name> -policy tf_pol1 -priority 100
bind lb vserver <LB VS Name> -policy tf_pol2 -priority 200
bind lb vserver <LB VS Name> -policy tf_pol3 -priority 300
<!--NeedCopy-->

Error prone method - To resolve the Global SSO configuration, you add the following configuration:

add tm trafficaction tf_act_default -SSO ON
add tm trafficpolicy tf_pol_default true tf_act_default

bind lb vserver <LB VS Name> -policy tf_pol_default -priority 65345
<!--NeedCopy-->

Note: The preceding modification can break SSO for traffic which hits <tf_pol1/tf_pol2/tf_pol3> as for these traffic, traffic policy is not be applied.

Correct method - To mitigate this, the SSO property must be applied individually for each of the corresponding traffic actions:

For example, in the preceding scenario, for SSO to happen for the traffic hitting tf_pol1/tf_pol3, the following configuration must be applied along with .

add tm trafficaction tf_act1 <Addition config> -SSO ON
add tm trafficaction tf_act3 <Addition config> -SSO ON
<!--NeedCopy-->

NetScaler Gateway cases

Scenarios based on global configuration:

set vpnparameter -SSO ON
<!--NeedCopy-->

Workaround:

add vpn trafficaction vpn_tf_act http  -SSO ON
add vpn trafficpolicy vpn_tf_pol  true vpn_tf_act
bind the following traffic policy to all VPN virtual server where SSO is expected:
bind vpn vserver vpn_vs -policy vpn_tf_pol -priority 65345
<!--NeedCopy-->

Scenarios based on session Policy configuration:

add vpn sessionaction vpn_sess_act -SSO ON
add vpnsession policy <name> <rule> vpn_sess_act
<!--NeedCopy-->

Points to note:

  • NetScaler AAA user/group for the preceding session policy must be replaced by traffic policy.

  • Bind the following policy to the LB virtual servers for the preceding session policy, bind lb virtual server [LB VS Name] -policy tf_pol -priority 65345.

  • If a traffic policy with other priority is configured, the preceding command does not serve good. The following section deals with scenarios based on conflict with multiple traffic policies associated with traffic.

Functional scenarios based on conflict with multiple traffic policies associated with a traffic:

For a particular NetScaler Gateway traffic, only one VPN traffic policy is applied. Because of global setting of SSO feature changes, applying an additional VPN traffic policy with low priority might not be applicable if there are other VPN traffic policies with high priority that does not have a required SSO configuration.

The following section describes method to ensure such cases are handled:

Consider there are three traffic policies with higher priority applied to a VPN virtual server:

add vpn trafficaction tf_act1 <Addition config>
add vpn trafficaction tf_act2 <Addition config>
add vpn trafficaction tf_act3 <Addition config>

add vpn trafficpolicy tf_pol1 <rule1> tf_act1
add vpn trafficpolicy tf_pol2 <rule2> tf_act2
add vpn trafficpolicy tf_pol3 <rule3> tf_act3

bind vpn vserver <VPN VS Name> -policy tf_pol1 -priority 100
bind vpn vserver <VPN VS Name> -policy tf_pol2 -priority 200
bind vpn vserver <VPN VS Name> -policy tf_pol3 -priority 300
<!--NeedCopy-->

Error prone method: To resolve the Global SSO configuration, you add the following configuration:

add vpn trafficaction tf_act_default -SSO ON
add vpn trafficpolicy tf_pol_default true tf_act_default

bind vpn vserver <VPN VS Name> -policy tf_pol_default -priority 65345
<!--NeedCopy-->

Note: The preceding modification can break SSO for the traffic that hits <tf_pol1/tf_pol2/tf_pol3> as for these traffic, traffic policy is not applied.

Correct method: To mitigate this, the SSO property must be applied individually for each of the corresponding traffic actions.

For example in the preceding scenario, for SSO to happen for traffic hitting tf_pol1/tf_pol3, the following configuration must be applied along with .

add vpn trafficaction tf_act1 [Additional config] -SSO ON

add vpn trafficaction tf_act3 [Additional config] -SSO ON
<!--NeedCopy-->
SSO for Basic, Digest, and NTLM authentication