-
Getting Started with Citrix ADC
-
Deploy a Citrix ADC VPX instance
-
Apply Citrix ADC VPX configurations at the first boot of the Citrix ADC appliance in cloud
-
Install a Citrix ADC VPX instance on Microsoft Hyper-V servers
-
Install a Citrix ADC VPX instance on Linux-KVM platform
-
Prerequisites for Installing Citrix ADC VPX Virtual Appliances on Linux-KVM Platform
-
Provisioning the Citrix ADC Virtual Appliance by using OpenStack
-
Provisioning the Citrix ADC Virtual Appliance by using the Virtual Machine Manager
-
Configuring Citrix ADC Virtual Appliances to Use SR-IOV Network Interface
-
Configuring Citrix ADC Virtual Appliances to use PCI Passthrough Network Interface
-
Provisioning the Citrix ADC Virtual Appliance by using the virsh Program
-
Provisioning the Citrix ADC Virtual Appliance with SR-IOV, on OpenStack
-
Configuring a Citrix ADC VPX Instance on KVM to Use OVS DPDK-Based Host Interfaces
-
-
Deploy a Citrix ADC VPX instance on AWS
-
Deploy a VPX high-availability pair with elastic IP addresses across different AWS zones
-
Deploy a VPX high-availability pair with private IP addresses across different AWS zones
-
Configure a Citrix ADC VPX instance to use SR-IOV network interface
-
Configure a Citrix ADC VPX instance to use Enhanced Networking with AWS ENA
-
Deploy a Citrix ADC VPX instance on Microsoft Azure
-
Network architecture for Citrix ADC VPX instances on Microsoft Azure
-
Configure multiple IP addresses for a Citrix ADC VPX standalone instance
-
Configure a high-availability setup with multiple IP addresses and NICs
-
Configure a high-availability setup with multiple IP addresses and NICs by using PowerShell commands
-
Configure a Citrix ADC VPX instance to use Azure accelerated networking
-
Configure HA-INC nodes by using the Citrix high availability template with Azure ILB
-
Configure address pools (IIP) for a Citrix Gateway appliance
-
Upgrade and downgrade a Citrix ADC appliance
-
Solutions for Telecom Service Providers
-
Load Balance Control-Plane Traffic that is based on Diameter, SIP, and SMPP Protocols
-
Provide Subscriber Load Distribution Using GSLB Across Core-Networks of a Telecom Service Provider
-
Authentication, authorization, and auditing application traffic
-
Basic components of authentication, authorization, and auditing configuration
-
On-premises Citrix Gateway as an identity provider to Citrix Cloud
-
Authentication, authorization, and auditing configuration for commonly used protocols
-
Troubleshoot authentication and authorization related issues
-
-
-
-
-
-
Persistence and persistent connections
-
Advanced load balancing settings
-
Gradually stepping up the load on a new service with virtual server–level slow start
-
Protect applications on protected servers against traffic surges
-
Retrieve location details from user IP address using geolocation database
-
Use source IP address of the client when connecting to the server
-
Use client source IP address for backend communication in a v4-v6 load balancing configuration
-
Set a limit on number of requests per connection to the server
-
Configure automatic state transition based on percentage health of bound services
-
-
Use case 2: Configure rule based persistence based on a name-value pair in a TCP byte stream
-
Use case 3: Configure load balancing in direct server return mode
-
Use case 6: Configure load balancing in DSR mode for IPv6 networks by using the TOS field
-
Use case 7: Configure load balancing in DSR mode by using IP Over IP
-
Use case 10: Load balancing of intrusion detection system servers
-
Use case 11: Isolating network traffic using listen policies
-
Use case 14: ShareFile wizard for load balancing Citrix ShareFile
-
-
-
-
Authentication and authorization for System Users
-
-
Configuring a CloudBridge Connector Tunnel between two Datacenters
-
Configuring CloudBridge Connector between Datacenter and AWS Cloud
-
Configuring a CloudBridge Connector Tunnel Between a Datacenter and Azure Cloud
-
Configuring CloudBridge Connector Tunnel between Datacenter and SoftLayer Enterprise Cloud
-
Configuring a CloudBridge Connector Tunnel Between a Citrix ADC Appliance and Cisco IOS Device
-
CloudBridge Connector Tunnel Diagnostics and Troubleshooting
-
-
Synchronizing Configuration Files in a High Availability Setup
-
Restricting High-Availability Synchronization Traffic to a VLAN
-
Understanding the High Availability Health Check Computation
-
Managing High Availability Heartbeat Messages on a Citrix ADC Appliance
-
Remove and Replace a Citrix ADC in a High Availability Setup
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已动态机器翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.
Este artigo foi traduzido automaticamente.
这篇文章已经过机器翻译.放弃
Translation failed!
Create policy labels
In addition to the built-in bind points where you set up policy banks, you can also configure user-defined policy labels and associate policies with them.
Within a policy label, you bind policies and specify the order of evaluation of each policy relative to others in the bank of policies for the policy label. The Citrix ADC also permits you to define an arbitrary evaluation order as follows:
- You can use “goto” expressions to point to the next entry in the bank to be evaluated after the current one.
- You can use an entry in a policy bank to invoke another bank.
Each feature determines the type of policy that you can bind to a policy label, the type of load balancing virtual server that you can bind the label to, and the type of content switching virtual server from which the label can be invoked. For example, a TCP policy label can only be bound to a TCP load balancing virtual server. You cannot bind HTTP policies to a policy label of this type. And you can invoke a TCP policy label only from a TCP content switching virtual server.
After configuring a new policy label, you can invoke it from one or more banks for the built-in bind points.
Create a caching policy label by using the CLI
At the command prompt, type the following commands to create a Caching policy label and verify the configuration:
- add cache policylabel <labelName> -evaluates req|res
- show cache policylabel<labelName>
Example:
> add cache policylabel lbl-cache-pol -evaluates req
Done
> show cache policylabel lbl-cache-pol
Label Name: lbl-cache-pol
Evaluates: REQ
Number of bound policies: 0
Number of times invoked: 0
Done
Create a content switching policy label by using the CLI
At the command prompt, type the following commands to create a Content Switching policy label and verify the configuration:
- add cs policylabel <labelName> http|tcp|rtsp|ssl
- show cs policylabel <labelName>
Example:
> add cs policylabel lbl-cs-pol http
Done
> show cs policylabel lbl-cs-pol
Label Name: lbl-cs-pol
Label Type: HTTP
Number of bound policies: 0
Number of times invoked: 0
Done
Create a rewrite policy label by using the CLI
At the command prompt, type the following commands to create a Rewrite policy label and verify the configuration:
- add rewrite policylabel <labelName> http_req|http_res|url|text|clientless_vpn_req|clientless_vpn_res
- show rewrite policylabel <labelName>
Example:
> add rewrite policylabel lbl-rewrt-pol http_req
Done
> show rewrite policylabel lbl-rewrt-pol
Label Name: lbl-rewrt-pol
Transform Name: http_req
Number of bound policies: 0
Number of times invoked: 0
Done
Create a responder policy label by using the CLI
At the command prompt, type the following commands to create a Responder policy label and verify the configuration:
- add responder policylabel <labelName>
- show responder policylabel <labelName>
Example:
> add responder policylabel lbl-respndr-pol
Done
> show responder policylabel lbl-respndr-pol
Label Name: lbl-respndr-pol
Number of bound policies: 0
Number of times invoked: 0
Done
Note: Invoke this policy label from a policy bank. For more information, see the “Binding a Policy to a Policy Label” section.
Create a policy label by using the GUI
- In the navigation pane, expand the feature for which you want to create a policy label, and then click Policy Labels. The choices are Integrated Caching, Rewrite, Content Switching, or Responder.
- In the details pane, click Add.
- In the Name box, enter a unique name for this policy label.
- Enter feature-specific information for the policy label. For example, for Integrated Caching, in the Evaluates drop-down menu, you would select REQ if you want this policy label to contain request-time policies, or select RES if you want this policy label to contain response-time policies. For Rewrite, you would select a Transform name.
- Click Create.
- Configure one of the built-in policy banks to invoke this policy label. For more information, see the “Binding a Policy to a Policy Label” section. A message in the status bar indicates that the policy label is created successfully.
Bind a policy to a policy label
As with policy banks that are bound to the built-in bind points, each entry in a policy label is a policy that is bound to the policy label. As with policies that are bound globally or to a vserver, each policy that is bound to the policy label can also invoke a policy bank or a policy label that is evaluated after the current entry has been processed. The following table summarizes the entries in a policy label.
-
Name. The name of a policy, or, to invoke another policy bank without evaluating a policy, the “dummy” policy name NOPOLICY.
You can specify NOPOLICY more than once in a policy bank, but you can specify a named policy only once.
-
Priority. An integer. This setting can work with the Goto expression.
-
Goto Expression. Determines the next policy to evaluate in this bank. You can provide one of the following values:
- NEXT. Go to the policy with the next higher priority.
- END. Stop evaluation.
- USE_INVOCATION_RESULT. Applicable if this entry invokes another policy bank. If the final Goto in the invoked bank has a value of END, evaluation stops. If the final Goto is anything other than END, the current policy bank performs a NEXT.
- Positive number: The priority number of the next policy to be evaluated.
- Numeric expression. An expression that produces the priority number of the next policy to be evaluated.
The Goto can only proceed forward in a policy bank.
If you omit the Goto expression, it is the same as specifying END.
-
Invocation Type. Designates a policy bank type. The value can be one of the following:
- Request Vserver. Invokes request-time policies that are associated with a virtual server.
- Response Vserver. Invokes response-time policies that are associated with a virtual server.
- Policy label. Invokes another policy bank, as identified by the policy label for the bank.
-
Invocation Name. The name of a virtual server or a policy label, depending on the value that you specified for the Invocation Type.
Share
Share
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.