Product Documentation

Citrix ADM with VMware ESXi

To install Citrix ADM virtual appliances on VMware ESXi, use VMware vSphere client.

Prerequisites

Before you begin installing a virtual appliance, verify that the following requirements:

  • Install VMware ESXi version 4.1 or later hardware that meets the minimum requirements.

  • Install VMware Client on a management workstation that meets the minimum system requirements.

  • Install VMware OVF Tool (required for VMware ESXi version 4.1) on a management workstation that meets the minimum system requirements.

  • Download the Citrix ADM set up files.

Note

VMotion is not support on Citrix ADM.

VMware ESXi hardware requirements

The following table lists the virtual computing resources that you need on your VMware ESXi server to install a Citrix ADM virtual appliance.

Component Requirement
RAM 32 GB
  Note: The default value is 8 GB. Citrix recommends that you increase the default value to 32 GB for better performance.
Virtual CPU 8 CPUs
  Note: The default is 2 CPUs. Citrix recommends that you increase the default value to 8 CPUs for better performance.
Storage space Citrix recommends using solid-state drive (SSD) technology for Citrix ADM deployments. The default value is 120 GB. Actual storage requirement will depend on Citrix ADM sizing estimation. If your Citrix ADM storage requirement exceeds 120 GB, you to have to attach an additional disk. Note that you can add only one additional disk. Citrix recommends you to estimate storage and attach additional disk at the time of initial deployment. For more information, see How to Attach an Additional Disk to Citrix ADM.
Virtual Network Interfaces 1
Throughput 1 Gbps or 100 Mbps

To install Citrix ADM

  1. Start the VMware vSphere client on your workstation.

  2. In the IP address / Name text box, type the IP address of the VMware ESXi server that you want to connect to.

  3. In the User Name and Password text boxes, type the administrator credentials, and then click Login.

  4. On the File menu, click Deploy OVF Template.

  5. In the Deploy OVF Template dialog box, in Deploy from a file or URL, browse to the location where you saved the Citrix ADM setup files, select the .ovf file, and click Next.

    Note

    If a warning message appears with the following text: The operating system identifier is not supported on the selected host, check to see if the VMware server supports FreeBSD operating system. Click Yes.

  6. On the OVF Template Details page, click Next.

  7. Type a name for the Citrix ADM virtual appliance, and then click Next.

  8. Specify the Disk Format by selecting either Thin provisioned format or Thick provisioned format.

    Note

    Citrix recommends that you select Thick provisioned format.

  9. Click Finish to start the installation process.

    localized image

  10. You are now ready to start the Citrix ADM virtual appliance.

  11. In the navigation pane, select the virtual appliance that you just installed and, from the Inventory menu, select Virtual Machine, and then select Upgrade Virtual Hardware. In the Confirm Virtual Machine dialog box, click Yes.

    localized image

  12. In the Inventory menu, select Virtual Machine, and then select Edit Settings.

  13. In the Virtual Machine Properties dialog box, on the Hardware tab, click Memory, and then in the right pane specify the Memory Size as 8 GB.

  14. Click CPUs, and then in the right pane, specify the CPUs as 4. Click OK.

  15. Add an additional disk as per your requirement.

    localized image

  16. In the navigation pane, select the virtual appliance that you just installed and, from the Inventory menu, select Virtual Machine, select Power, and then select Power On.

  17. Select the Console tab to display the Citrix ADM Initial Network Configuration options for specifying the host name, IPv4 address, subnet mask (Netmask), and Gateway IP address for the Citrix ADM virtual appliance.

    localized image

  18. After specifying the required IP addresses,  save the configuration settings.

  19. When prompted, logon using nsrecover/nsroot credentials.

    localized image

  20. Execute the deployment script by typing the command at the shell prompt:

    deployment_type.py
    

    localized image

  21. Select the deployment type as Citrix ADM Server. If you do not select any option, by default, it is deployed as a server.

    localized image

    Note

    Currently, you cannot deploy connector nodes, database nodes, and/or Citrix ADM agents because Citrix ADM does not support Scale-Out deployment.

  22. Type Yes to deploy Citrix ADM as a standalone deployment.

  23. Type Yes to restart the Citrix ADM server.

    Note

    After you install Citrix ADM, you can update the initial configuration settings at a later time.

    To update the initial configuration in the Citrix ADM, type networkconfig in the Citrix ADM console. The console displays the Citrix ADM initial network configuration options. You can then update the following parameters on the console:

    • Host name of Citrix ADM

    • Citrix ADM IPv4 address

    • Netmask

    • Gateway IPv4 address

    • DNS IPv4 address

Verification

After the server is installed, you can access the graphical user interface (GUI) by typing the IP address of the Citrix ADM server in the address bar of your browser. The default administrator credentials to log on to the server are nsroot/nsroot.

The browser displays the Citrix ADM configuration utility.

Citrix ADM with VMware ESXi