Product Documentation
Application Delivery Management
14.1 - Current Release 13.1 13.0 12.1
View PDF

View details in service graph

December 31, 2023
Contributed by: 
C

In Citrix ADM, navigate to Application > Service Graphs > Kubernetes service graph and select the time duration from the list to view the service graph details.

Two-tier/Service Mesh Lite topology Single-tier/Unified Ingress topology
Two tier architecture Other topologies

  • Tier 1 ingress – Citrix Ingress Controller inside the Kubernetes cluster configures a Citrix ADC instance (VPX/MPX/SDX/BLX) outside the Kubernetes cluster.

  • Tier 2 ingress – Citrix Ingress Controller running as a sidecar along with Citrix ADC CPX instance inside the Kubernetes cluster.

  • Ingress – Displays for all other deployment topologies.

Service graph dashboard

Details-service-graph

1 - End-to-end network map of your application that shows how your component services are communicating

2 – Graph that indicates hits and errors for a specific time duration

3 – Search bar to search for services

4 – Time list to select the time duration

5 - Apply filters to display services

6 – Setting icon

7 – Zoom in and zoom out view

8 – Graph view or tabular view

Based on the selected time duration, you can view the service graph.

Service icon Description
Service graph edge detection The edge width indicates the number of hits. The greater or more the edge width, indicates the number of hits is higher.
Service graph errors Service with a warning icon indicates that the service has errors.
Service graph latency Service with a stopwatch icon indicates that the service has latency or response time issues.
Service graph latency Service with both stopwatch and warning icons indicate that the service has both errors and latency/response time issues.

Note

If a service has no warning or stopwatch icon, it indicates that the service has anomalies or threshold breach for Hits.

Based on the selected time duration, you can view the service graph. Select the time period from the graph that indicates hits to drill down further for additional information.

Details-service-graph1

Note

If no active transactions received by Citrix ADM, you can view only the services that are load balanced by the Citrix ADC instance. When you hover the mouse pointer on a service, all metrics are displayed as 0.

No transactions

The service graph is displayed with the protocol used by the services. Consider that you have the following services running in your Kubernetes cluster as shown in the image:

Services Kubernetes

Note

If you have added multiple clusters in Orchestration > Kubernetes > Clusters, you can view services associated with each cluster.

Multiple clusters

You can view the following status for your services:

  • Critical (red) - Indicates when average service response time > 200 ms AND error count > 0

  • Review (orange) - Indicates when average service response time > 200 ms OR error count > 0

  • Good (green) - Indicates no error and average service response time < 200 ms

The following are protocols that enable you to identify the protocol used by a service:

  • TCP – Indicates the service is using the TCP protocol.

  • SSL, HTTP – Indicates the service is using the SSL over HTTP protocol.

  • SSL, TCP – Indicates the service is using the SSL over TCP protocol.

    Note

    The service without a protocol indicates the service is using the HTTP protocol.

Using the tabular view, you can see:

  • Key metrics for the service

  • Key metrics between a source service to a destination service

    Key metrics

As an administrator, using these key metrics, you can analyze the trends of golden signals for the selected time duration.

View client metrics

You can view from which location the client is accessing the service. As an administrator, you can visualize the client metrics and analyze the issues that occur from the client.

Hover the mouse pointer on a client region to view the metrics.

Client metrics

  • Hits - Indicates the total hits received by the client.

  • Client Network Latency - Indicates the average client network latency.

  • Client 4xx Errors - Indicates the total client 4xx errors.

  • Client SSL Errors - Indicates the total client SSL errors.

IP blocks in Citrix ADM - Citrix ADM can recognize the client location if the client uses a public IP address. Citrix ADM has its built-in location CSV file that matches the location based on the client IP address range.

Citrix ADM can recognize the client location with private IP address only when the IP address is added to the Citrix ADM server. For example, if the client IP address falls within a private IP address range associated with City A, Citrix ADM recognizes that the traffic is originating from City A for this client.

For more information, see Create a private IP block.

View ingress metrics

You can view the type of ingress used in the Kubernetes cluster.

Ingress RTT

  • Citrix ADC IP address and its score

  • Current State – Indicates if the Citrix ADC instance is Up, Down, or Out of Status

  • Max Contribution – Indicates the issue that is affecting the instance score

For the single-tier topology, you can view only a single Ingress.

Click the Ingress to drill down further for details. For more information, see View ingress details for troubleshooting issues.

View TCP and SSL metrics

Using the TCP and SSL metrics, you can:

  • View TCP connection details between services

  • Determine if TCP-related issues are from the source or destination service

  • View if the SSL error is from the source or destination service

  • View the SSL protocol version used by SSL services

TCP metrics

Hover the mouse pointer over a TCP service or its associated incoming service to view the TCP metrics.

TCP

  • TCP connections – Total connections established between the services

  • Data Volume – Total data processed by the service

  • TCP Server Reset – Total TCP resets initiated from the server

SSL metrics

Hover the mouse pointer on a service that uses SSL protocol to view the SSL metrics.

SSL

  • SSL Server Errors – Indicates the total SSL errors from the server. (For example, SSL certificate unknown)

  • SSL Protocol – Indicates the SSL protocol version used by the service

  • SSL Client Errors - Indicate the total SSL errors from the client. (For example, SSL client authentication error)

View service details

Click a service and select View Details to view the service details. For more information, see View service details.

Apply filters

You can apply filters to view specific service information. Click No Filters list to get the filter options.

Filter options

For example, if you want to view services that have latency less than 150 ms, then click the bar graph under Service Response Time to display the results.

Filter options

Click Service Info to select and apply filters for:

  • Cluster – Displays all services applicable for the selected cluster or clusters.

  • Namespace – Displays all services applicable for the selected namespace.

    Service-labels

    Note

    Depending upon the labels configured for the service in Kubernetes service definition YAML, you may also view more filter options.

Click Clear All to clear all filters.

Clear-all

Alternatively, you can also use the search text box and type a service name to display the results on the service graph.

Search-bar

Using the settings option

Settings-icon

1 – Settings icon

2 – Options to display the service graph as Default, Layer-Based, or Force-Directed views

3 – Select the options from the list to view the services based on categories. After you select a category from the list, click + on the graph to view all services

Services-views

4 – Enables you select the option on how you want to display the services.

5 - Options to either save the settings or to reset to default.

Analyze the errors

Hover the mouse pointer on a service that indicates errors.

Error Description
TCP error The TCP Server Reset indicates the total TCP resets initiated from the server.
TCP client error The TCP Client Reset indicates the total TCP resets initiated by the client.
SSL error The SSL Client Errors indicate the total SSL errors from the client. (For example, SSL client authentication error).
  The SSL Server Errors Indicate the total SSL errors from the server. (For example, SSL certificate unknown)

Note

  • Client error count (irrespective of the protocol type) is displayed in any service if the client error count is 1 or higher.

  • Clients error count displayed for any service indicates that the errors are from the client end.

View HTTP transaction details

Note

You can view the errors by hovering the mouse pointer on an erroneous service and click the issue count.

Issue count

According to the example shown in the image, you can view an end-to-end network map of your application that shows how your component services are communicating.

When you hover the mouse pointer on the Ecommerce-Service, you can view metrics details for Ecommerce-Service.

Error-details

Citrix ADM also enables you to view transaction details between Ingress and services. Hover the mouse pointer to view details such as total errors, average service response time, and so on between the Ingress and service.

Ingress-service-details

Hits – Indicates the total number of hits received by the service.

Service Response Time – Indicates the average response time taken from the service to respond for Time To First Byte (TTFB).

Errors – Indicates the total errors such as 4xx, 5xx, and so on.

Data volume – Indicates the total volume of data processed by the service.

SSL Protocol – Indicates the SSL protocol version.

Click the arrow between Ingress and service to view the detailed transactions.

For more information, see View analytics for Web transactions.

View details in service graph
December 31, 2023
Contributed by: 
C
December 31, 2023
Contributed by: 
C

In this article

Site feedback | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.