NetScaler T1120

December 31, 2023

Contributed by:

The NetScaler T1120 appliance is a 2U appliance, with a dual-core processor and 128 GB memory.

The following figure shows the front panel of the T1120 appliance.

Figure 1. NetScaler T1120 appliance front panel

T1120 front panel

The T1120 appliance has the following ports:

Four 40G QSFP+ ports
16 10GBASE-X SFP+ ports
Two 10/100/1000BASE-T, RJ45 ports
One 10/100BASE-T RJ-45 LOM port

The following figure shows the back panel of the T1120 appliance.

Figure 2. NetScaler T1120 back panel

T1120 back panel

The following components are visible on the back panel of the T1120 appliance:

240 GB removable solid-state drive.

Note: Drive densities might increase as components become EOL but its size is never smaller than the original.
Power switch, which turns off power to the appliance, as if you were to unplug the power supply. Press the switch for less than two seconds to shut off the power.
Disable alarm button. This button is functional only when the appliance has two power supplies. Press this button to stop the power alarm from sounding when either of the following conditions is true:
- You have plugged the appliance into only one power outlet.
- One power supply is malfunctioning, and you want to continue operating the appliance until it is repaired.
Two power supplies, each rated at 1000 watts, 100–240 volts. Each power supply has an LED that indicates the status of the power supply.

For information about installing the rails, rack mounting the hardware, and connecting the cables, see Installing the Hardware.

For information about performing initial configuration of your appliance, see Initial Configuration.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

NetScaler T1120

December 31, 2023

Contributed by:

December 31, 2023

Contributed by:

NetScaler T1120

In this article