Lights out management port of the Citrix ADC MPX appliance
Some Citrix ADC appliances have an Intelligent Platform Management Interface (IPMI), also known as the lights out management (LOM) port, on the front panel of the appliance. You can use the LOM port to remotely monitor and manage the appliance, independently of the Citrix ADC software.
Connect the LOM port to a dedicated channel that is separate from the data channel, to maintain connectivity to the appliance even if the data network is down. You eliminate the data cable and data network as a single point of failure.
You can access the LOM port through a browser and use the GUI (GUI) for most tasks. All tasks can be performed through the Citrix ADC shell.
You can use either the GUI or a shell for the following tasks:
- Configuring the network settings
- Health monitoring
- Power control operations
- Factory reset
- Enable or disable RAKP
Different Citrix appliances support different shells:
- For FreeBSD based Citrix ADC MPX appliances, use the
bash nsrootshell (also known as NS Shell).
- For Linux based appliances, use the Linux bash root shell.
The terms LOM and Baseboard Management Controller (BMC) are used interchangeably.
LOM support matrix
The LOM support matrix shows the recommended LOM firmware version for different platforms.
|MPX 11500 NEBS||3.39|
|MPX 14000 FIPS||4.14|