Citrix SD-WAN Platforms

Hard Disk Drive

The Citrix SD-WAN virtual machines are hosted on the hard-disk drive.

Replace hard disk drive

Verify that the replacement hard disk drive is the correct type for the SD-WAN 4000/5000 platform.

To install a hard disk drive

  1. Shut down the appliance.
  2. Locate the hard disk drive on the back panel of the appliance.
  3. Disengage the hard disk drive by pushing the safety latch of the drive cover to the right or down, depending on the platform, while pulling out on the drive handle to disengage. Pull out the faulty drive.

    Figure 1. Removing the Existing Hard Disk Drive localized image

  4. Pick up the new disk drive, open the drive handle fully to the left, and insert the new drive into the slot as far as possible. To seat the drive, close the handle flush with the rear of the appliance so that the hard drive locks securely into the slot.

    Important: When you insert the drive, make sure that the Citrix product label is at the top.

    Figure 2. Inserting the Replacement Hard Disk Drive localized image

  5. Turn on the appliance.
Hard Disk Drive