Product Documentation
Citrix SD-WAN Platforms
View PDF

Mounting the Appliance

June 19, 2020
Contributed by: 
C

Rack Mount the appliance

The rackmount chassis of SD-WAN 210-SE/210-SE LTE appliances fits a standard rack and takes 1U of racking height.

The 210-SE/210-SE LTE appliance can be placed on any flat surface, or mounted in any standard rack unit with the provided rack-mount brackets and screws.

To install the appliance into a rack:

  1. Ensure that the SD-WAN 210-SE/210-SE LTE appliance is placed on a stable surface prior to rack-mount installation.
  2. Attach the provided rack-mount brackets to the sides of the appliance using the provided bracket screws.
    1. If you are installing the appliance into a four-post rack, attach the rack-mount brackets with the handles aligned with the front of the SD-WAN 210-SE/ 210-SE LTE appliance.
    2. If you are installing the appliance into a two-post rack, attach the rack-mount brackets with the handles aligned with the middle of the SD-WAN 210-SE/210-SE LTE appliance.
  3. Position the SD-WAN 210-SE/SD-WAN 210-SE LTE appliance in the rack. Ensure there is enough room around the device to allow for sufficient air flow.
  4. Line up the rack-mount bracket holes to the holes on the rack and ensure that the SD-WAN 210-SE/210-SE LTE appliance is level.
  5. Finger tighten four rack-mount screws to attach the appliance to the rack.
  6. Tighten the rack-mount screws with an appropriate screwdriver.
  7. Plug the provided power cable.

localized image

Rack mount the appliance with antenna

localized image

Wall mount the appliance

To install the appliance into the wall:

  1. Using the supplied drywall screws and anchors, drill 2 holes into your wall lined up with the two matching screw holes on the rear of the mount housing of the appliance. Hang the appliance with the 4 (2 on each side) screws.
    1. Align the chassis ears brackets against the front and back of the mounting holes provided and properly attach ears bracket to the SD-WAN chassis by tightening the 4 screws (each side 2) provided.
    2. Mount the SD-WAN 210-SE/210-SE LTE chassis using the 4 ear brackets (each side 2) as shown below on both sides to the wall.

localized image

Wall mount the appliance with antenna

localized image

Desktop mount the appliance

SD-WAN 210-SE/210-SE LTE appliance can be desktop mounted using the rubber feet shipped in the appliance package.

Mounting the Appliance
June 19, 2020
Contributed by: 
C
June 19, 2020
Contributed by: 
C

In this article

Site feedback | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.