Citrix SD-WAN Platforms

WCCP Testing and Troubleshooting

May 23, 2019

Contributed by:

When working with WCCP, the appliance provides different ways of monitoring the status of the WCCP interface, and your router should also provide information.

Monitoring: Appliance Performance: WCCP Page—The WCCP page reports the current state of the WCCP link, and reports most problems.

Log Entries—The Monitoring: Appliance Performance: Logging page shows a new entry each time WCCP mode is established or lost.

Figure 1. WCCP Log Entries (format varies somewhat with release)

localized image

Router Status—On the router, the “show ip wccp” command shows the status of the WCCP link:

``` pre codeblock Router>enable Password: Router#show ip wccp Global WCCP information: Router information: Router Identifier: 172.16.2.4 Protocol Version: 2.0

Service Identifier: 51
    Number of Cache Engines:             0
    Number of routers:                   0
    Total Packets Redirected:            19951
    Redirect access-list:                -none-
    Total Packets Denied Redirect:       0
    Total Packets Unassigned:            0
    Group access-list:                   -none-
    Total Messages Denied to Group:      0
    Total Authentication failures:       0 <!--NeedCopy--> ```

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

WCCP Testing and Troubleshooting

May 23, 2019

Contributed by:

May 23, 2019

Contributed by:

WCCP Testing and Troubleshooting

In this article