Citrix SCOM Management Pack for NetScaler Reference Guide

About

Citrix Management Pack Library

Display Name Citrix Management Pack Library
Version 1.0.8.0
Description Common definitions for Citrix Management Packs.

Top

Citrix NetScaler Appliance (v10.x and later) Discovery Library

Display Name Citrix NetScaler Appliance (v10.x and later) Discovery Library
Version 1.15.29.0
Description This management pack discovers components of Citrix NetScaler appliances (v10.x and later).
Knowledge Article
Summary

This management pack contains discoveries for Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v10.x and later) Component Library

Display Name Citrix NetScaler Appliance (v10.x and later) Component Library
Version 1.15.29.0
Description Components Library for Citrix NetScaler Appliance (v10.x and later).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v10.x and later) Monitoring Library

Display Name Citrix NetScaler Appliance (v10.x and later) Monitoring Library
Version 1.15.29.0
Description Monitoring Library for Citrix NetScaler (v10.x and later).
Knowledge Article
Summary

This management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v9.x) Discovery Library

Display Name Citrix NetScaler Appliance (v9.x) Discovery Library
Version 1.15.29.0
Description This management pack discovers components of Citrix NetScaler appliances (v9.x).
Knowledge Article
Summary

This management pack contains discoveries for Citrix NetScaler appliances (versions 9.x).

Top

Citrix NetScaler Appliance (v9.x) Component Library

Display Name Citrix NetScaler Appliance (v9.x) Component Library
Version 1.15.29.0
Description Component Library for Citrix NetScaler (v9.x).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (versions 9.x).

Top

Citrix NetScaler Device Discovery Library

Display Name Citrix NetScaler Device Discovery Library
Version 1.15.29.0
Description This management pack discovers Citrix NetScaler network devices.
Knowledge Article
Summary

This management pack contains class definitions and discoveries for Citrix NetScaler network devices. The devices are discovered as SNMP devices. They are identified according to their "System Object ID" property.

Top

Citrix NetScaler Appliance Component Library

Display Name Citrix NetScaler Appliance Component Library
Version 1.15.29.0
Description Component Library for Citrix NetScaler (all versions).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (all versions).

Top

Citrix NetScaler Module Library

Display Name Citrix NetScaler Module Library
Version 1.15.29.0
Description This management pack contains probes for Citrix NetScaler monitoring.
Knowledge Article
Summary

This management pack contains probes for Citrix NetScaler monitoring. Probes are implemented by using managed code.

Top

Citrix NetScaler Monitoring Library

Display Name Citrix NetScaler Monitoring Library
Version 1.15.29.0
Description Monitoring Library for Citrix NetScaler (all versions).
Knowledge Article
Summary

This management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (all versions).

Top


Discoveries

Target Display Name Description Enabled by default Discovery interval
Citrix NetScaler Device Group Citrix NetScaler Device Group Population Discovery
Citrix NetScaler Device Group Member population Discovery.
Yes ---
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Global Settings Discovery
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Access Gateway Global Settings Discovery
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Policy Discovery
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Access Gateway Policy Discovery
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Access Gateway Virtual Server For NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Virtual Server Authentication Policy Relationship Discovery
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Access Gateway Virtual Server Citrix NetScaler Appliance (v9.x) Access Gateway Virtual Server Authentication Policy Relationship Discovery
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) BridgeGroup Discovery
Discovers BridgeGroup for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) BridgeGroup Discovery
Discovers BridgeGroup for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Bridge Group Citrix NetScaler Appliance (v10.x and later) BridgeGroup Relationships Discovery
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Bridge Group Citrix NetScaler Appliance (v9.x) BridgeGroup Relationships Discovery
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server CERT Discovery
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server CERT Discovery
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Certificate Discovery
Discovers Certificate for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Certificate Discovery
Discovers Certificate for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Channel Discovery
Discovers Channels for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Channel Discovery
Discovers Channels for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Network Device Citrix NetScaler Appliance Discovery (v10.x and later)
Discovers Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Network Device Citrix NetScaler Appliance (v9.x) Discovery
Discovers Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Node Citrix NetScaler Device Discovery
Discovers Citrix NetScaler Device using SNMP from Network device list.
Yes 14400 sec
Windows Server Citrix MPNS Agent Service Discovery
Discovers Citrix NetScaler MP Agent used for monitoring Citrix NetScaler appliance.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Interface Discovery
Discovers Interfaces for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Interface Discovery
Discovers Interfaces for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) IP Version 4 Discovery
Discovers IP Version 4 for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) IP Version 4 Discovery
Discovers IP Version 4 for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) IP Version 6 Discovery
Discovers IP Version 6 for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) IP Version 6 Discovery
Discovers IP Version 6 for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server LDAP Discovery
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server LDAP Discovery
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Discovery
Discovers load balance service for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Load Balancing Service Discovery
Discovers load balance service for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Group Discovery
Discovers load balance service group for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Load Balancing Service Group Discovery
Discovers load balance service group for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Discovery
Discovers load balance virtual server for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Discovery
Discovers load balance virtual server for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
Windows Computer Citrix Computer Discovery
Discovers managed nodes with Citrix software installed on it.
Yes 3600 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Memory Feature Discovery
Discovers Memory Pools for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Memory Feature Discovery
Discovers Memory Pools for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server Negotiate Discovery
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server Negotiate Discovery
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) NetBridge Discovery
Discovers NetBridge for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) NetBridge Discovery
Discovers NetBridge for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Network Bridge Citrix NetScaler Appliance (v10.x and later) NetBridge Relationships Discovery
Discovers NetBridge Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Network Bridge Citrix NetScaler Appliance (v9.x) NetBridge Relationship Discovery
Discovers NetBridge Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Policy Discovery
Discovers Policies for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Policy Discovery
Discovers Policies for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Policy Action Discovery
Discovers Policy Actions for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Policy Action Discovery
Discovers Policy Actions for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server Radius Discovery
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server Radius Discovery
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Discovery
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Discovery
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Group Discovery
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Group Discovery
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
NetScaler Appliance (v10.x and later) SSL Action Citrix NetScaler Appliance (v10.x and later) SSL Policy - Action Relationship Discovery
Discovers relationship between SSL Policy and SSL Policy Action objects.
Yes 14400 sec
NetScaler Appliance v9.x SSL Action Citrix NetScaler Appliance (v9.x) SSL Policy - Action Relationship Discovery
Discovers relationship between SSL Policy and SSL Policy Action objects.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server SAML Discovery
Discovers SAML Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Settings Discovery
Discovers Settings for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Settings Discovery
Discovers Settings for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server TACACS Discovery
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server TACACS Discovery
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Virtual LAN Discovery
Discovers Virtual LAN for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Virtual LAN Discovery
Discovers Virtual LAN for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Virtual LAN Citrix NetScaler Appliance (v10.x and later) VLAN Relationships Discovery
Discovers VLAN Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Virtual LAN Citrix NetScaler Appliance (v9.x) VLAN Relationship Discovery
Discovers VLAN Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) VPN Virtual Server Discovery
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) VPN Virtual Server Discovery
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliances Populate Citrix NetScaler Appliance Root With Appliance
Makes containment relationships between the "Citrix NetScaler Appliance" and the "Citrix Appliance Root" objects.
Yes ---
Citrix Management Populate Citrix NetScaler Root Object
Makes hosting relationships between the "Citrix NetScaler Appliances" and the "Citrix Management" object.
Yes ---
All NetScaler Service Groups Populate All Load Balancing Service Groups Group
Populates a group with all load balancing service groups.
Yes ---
All NetScaler Services Populate All Load Balancing Service Group
Populates a group with all load balancing service.
Yes ---
All Load Balance Virtual Servers Populate All Load Balancing Virtual Server Group
Populates a group with all load balancing virtual server.
Yes ---

Monitors

Citrix NetScaler Access Gateway Virtual Server

Access Gateway Virtual Server - Availability State Monitor

Display Name Access Gateway Virtual Server - Availability State Monitor
Description
Monitors state of a Citrix NetScaler access gateway virtual server.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Access Gateway Virtual Server.

This monitor is enabled by default.

Virtual servers on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests. DOWN status indicates configuration problems (example: SSL Offload disabled or no SSL certificate bound to the virtual server).

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Access Gateway Virtual Server - Availability State Monitor
Alert Message
Access Gateway Virtual Server {0} on {1} device has state: {2}.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0

Top

Access Gateway Virtual Server - Current Users Percentage

Display Name Access Gateway Virtual Server - Current Users Percentage
Description
Percentage of Current Users in relation to Maximum Users that can be logged in.
Knowledge Article
Summary

This monitor checks percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server.

This monitor is enabled by default.

Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values.

The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for current users percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for current users percentage. Default value is 95.

Alert Name Access Gateway Virtual Server - Current Users Percentage
Alert Message
                        Current users percentage on Access Gateway Virtual Server named {0} on {1} device is {2}.

                        Max Users: {3}
                        Current Users: {4}
                    
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor
Description
Monitors change of total number of request bytes received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of request bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) request bytes received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Requests Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Requests Total No Change Performance Monitor
Description
Monitors change of total number of requests received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of requests received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Requests Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) requests received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor
Description
Monitors change of total number of response bytes received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of response bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) response bytes received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Responses Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Responses Total No Change Performance Monitor
Description
Monitors change of total number of responses received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of responses received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Responses Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) responses received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

VPN Server Requests Rate Performance Monitor

Display Name VPN Server Requests Rate Performance Monitor
Description
Monitors requests rate of a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor checks the total number of requests received on a Citrix NetScaler VPN (virtual) server.

Total number of requests received on this service or virtual server.

(This applies to HTTP/SSL services and servers.).

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name VPN Server Requests Rate Performance Monitor
Alert Message
VPN server {0} on {1} device has requests rate: {2}.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 900
CriticalThreshold 1000
CacheExpirationFactor 1

Top

Citrix NetScaler Appliance

AAA - Authentication Failure Ratio

Display Name AAA - Authentication Failure Ratio
Description
Percentage of authentication failures in relation to total number of authentication attempts.
Knowledge Article
Summary

This monitor checks percentages of authentication failures in relation to total number of authentication attempts.

This monitor is enabled by default.

"Authentication Failure Ratio" is calculated using "Authentication successes" and "Authentication failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Authentication failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for Authentication failure ratio (in percentages). Default value is 95.

Alert Name AAA - Authentication Failure Ratio
Alert Message
                        Current Authentication Failure Ratio (in percentages) on {0} device is {1}.

                        Authentication successes: {2}
                        Authentication failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Failures

Display Name AAA - Authentication Failures
Description
Number of authentication failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of authentication failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of authentication failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Authentication failures
Alert Message
Number of authentication failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current AAA Sessions Drop

Display Name AAA - Current AAA Sessions Drop
Description
Monitors drop in number of current AAA sessions during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks for drop in the number of current AAA sessions during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for drop in number of current AAA sessions during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Current AAA sessions drop
Alert Message
                        Number of AAA sessions on {0} appliance is decreased by more than predefined threshold.

                        Delta value: {1}
                        Current number of AAA sessions: {2}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current AAA Sessions Minimum

Display Name AAA - Current AAA Sessions Minimum
Description
Monitors if number of current AAA sessions is below minimum specified by Threshold parameter.
Knowledge Article
Summary

This monitor checks if number of current AAA sessions is below minimum specified by Threshold parameter.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Minimum number of current AAA sessions. If lower, monitor goes into warning state. Default value is 5.

Alert Name AAA - Current AAA sessions minimum
Alert Message
                        Number of current AAA sessions on {0} appliance is below minimum specified by Threshold parameter.

                        Current AAA sessions: {1}
                    
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5

Top

AAA - HTTP Authorization Failure Ratio

Display Name AAA - HTTP Authorization Failure Ratio
Description
Percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts.
Knowledge Article
Summary

This monitor checks percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts.

This monitor is enabled by default.

"HTTP Authorization Failure Ratio" is calculated using "HTTP authorization successes" and "HTTP authorization failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for HTTP authorization failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for HTTP authorization failure ratio (in percentages). Default value is 95.

Alert Name AAA - HTTP Authorization Failure Ratio
Alert Message
                        Current HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}.

                        HTTP Authorization successes: {2}
                        HTTP Authorization failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Failures

Display Name AAA - HTTP Authorization Failures
Description
Number of HTTP authorization failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of HTTP authorization failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of HTTP authorization failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - HTTP authorization failures
Alert Message
Number of HTTP authorization failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Non HTTP Authorization Failure Ratio

Display Name AAA - Non HTTP Authorization Failure Ratio
Description
Percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts.
Knowledge Article
Summary

This monitor checks percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts.

This monitor is enabled by default.

"Non HTTP Authorization Failure Ratio" is calculated using "Non HTTP authorization successes" and "Non HTTP authorization failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Non HTTP authorization failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for Non HTTP authorization failure ratio (in percentages). Default value is 95.

Alert Name AAA - Non HTTP Authorization Failure Ratio
Alert Message
                        Current Non HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}.

                        Non HTTP Authorization successes: {2}
                        Non HTTP Authorization failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Failures

Display Name AAA - Non HTTP Authorization Failures
Description
Number of non HTTP authorization failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of non HTTP authorization failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of non HTTP authorization failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Non HTTP authorization failures
Alert Message
Number of non HTTP authorization failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage

Display Name Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage
Description
Percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures).
Knowledge Article
Summary

This monitor checks percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures).

This monitor is enabled by default.

"STA connection failure percentage" is calculated using "CPS connection failure" and "CPS connection success" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for CPS connection failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for CPS connection failure percentage. Default value is 95.

Alert Name Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage
Alert Message
                        Current CPS Connection Failure Percentage on {0} device is {1}.

                        CPS connection successes: {2}
                        CPS connection failure: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN CSG Statistics - SOCKS Client Errors

Display Name Access Gateway VPN CSG Statistics - SOCKS Client Errors
Description
SOCKS client errors that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of SOCKS client errors occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of SOCKS client errors occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN CSG Statistics - SOCKS client errors
Alert Message
Number of recent SOCKS client errors on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN CSG Statistics - SOCKS Server Errors

Display Name Access Gateway VPN CSG Statistics - SOCKS Server Errors
Description
SOCKS server errors that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of SOCKS server errors occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of SOCKS server errors occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN CSG Statistics - SOCKS server errors
Alert Message
Number of recent SOCKS server errors on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN CSG Statistics - STA Connection Failure Percentage

Display Name Access Gateway VPN CSG Statistics - STA Connection Failure Percentage
Description
Percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures).
Knowledge Article
Summary

This monitor checks percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures).

This monitor is enabled by default.

"STA connection failure percentage" is calculated using "STA connection failure" and "STA connection success" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for STA connection failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for STA connection failure percentage. Default value is 95.

Alert Name Access Gateway VPN CSG Statistics - STA Connection Failure Percentage
Alert Message
                        Current STA Connection Failure Percentage on {0} device is {1}.

                        STA connection successes: {2}
                        STA connection failure: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN General - Login-page Delivery Failure Percentage

Display Name Access Gateway VPN General - Login-page Delivery Failure Percentage
Description
Percentage of Login-page Delivery Failures in relation to total number of Login-page requests received.
Knowledge Article
Summary

This monitor checks percentage of Login-page Delivery Failures in relation to total number of Login-page requests received.

This monitor is enabled by default.

"Login-page delivery failure percentage" is calculated using "Login-page delivery failures" and "Login-page requests received" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Login-page delivery failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for Login-page delivery failure percentage. Default value is 95.

Alert Name Access Gateway VPN General - Login-page Delivery Failure Percentage
Alert Message
                        Current Login-page Delivery Failure Percentage on {0} device is {1}.

                        Login-page requests received: {2}
                        Login-page delivery failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled

Display Name Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled
Description
Login Failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login failures occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Failure - IIP disabled and MIP disabled
Alert Message
Number of recent login failures where both IIP and MIP were disabled on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Failure - IIP Failed And MIP Disabled

Display Name Access Gateway VPN Login Failure - IIP Failed And MIP Disabled
Description
Login Failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login failures occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Failure - IIP failed and MIP disabled
Alert Message
Number of recent login failures where IIP failed and MIP was disabled on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Disabled And MIP Used

Display Name Access Gateway VPN Login Success - IIP Disabled And MIP Used
Description
Login Successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP disabled and MIP used
Alert Message
Number of recent login successes where IIP was disabled and MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Failed And MIP Used

Display Name Access Gateway VPN Login Success - IIP Failed And MIP Used
Description
Login Successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP failed and MIP used
Alert Message
Number of recent login successes where IIP failed and MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Spillover And MIP Used

Display Name Access Gateway VPN Login Success - IIP Spillover And MIP Used
Description
Login Successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP spillover and MIP used
Alert Message
Number of recent login successes where IIP spillover to MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Appliance Monitoring Availability

Display Name Appliance Monitoring Availability
Description
Checks appliance URL availability for monitoring.
Knowledge Article
Summary

This monitor checks the appliance availability for monitoring.

Appliance is available for monitoring if access to the appliance using NITRO API is success.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name NetScaler Appliance Availability
Alert Message
NetScaler appliance "{0}" is inaccessible.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler CPU Usage

Display Name Citrix NetScaler CPU Usage
Description
Monitors NetScaler CPU utilization percentage.
Knowledge Article
Summary

This monitor checks the percentage of CPU utilization.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

  • WarningThreshold - Warning threshold value in percent. Default value is 92.

  • CriticalThreshold - Critical threshold value in percent. Default value is 98.

Alert Name Citrix NetScaler CPU Usage
Alert Message
Device {0} has CPU utilization of {1} percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 92
CriticalThreshold 98
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler Flash Disk Partition Percentage Usage

Display Name Citrix NetScaler Flash Disk Partition Percentage Usage
Description
Monitors percentage of /flash disk partition utilization on NetScaler.
Knowledge Article
Summary

This monitor checks used space in /flash partition of the disk, as a percentage.

This is a critical counter.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Flash Disk Partition Percentage Usage
Alert Message
Device {0} has /flash disk partition usage {1}  percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler Global Memory Percentage Usage

Display Name Citrix NetScaler Global Memory Percentage Usage
Description
Monitors percentage of global memory utilization on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of global memory utilization on NetScaler.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Global Memory Percentage Usage
Alert Message
Global memory usage on  {0} device is {1} percents.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler TCP SYN Packets Received Rate Usage

Display Name Citrix NetScaler TCP SYN Packets Received Rate Usage
Description
Monitors the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state.
Knowledge Article
Summary

This monitor checks the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state.

A connection goes into the SYN_RCVD state after receiving a SYN packet.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of TCP SYN packets received. Default value is 1000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler TCP SYN Packets Received Rate Usage
Alert Message
Device {0} has TCP SYN packets received rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 1000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage

Display Name Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage
Description
Monitors percentage of TCP transmitted packets rate against retransmitted packets rate on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of TCP packets loss rate.

For a comparison, reference and current trends, refer to the TCP Transmission Packets Loss Rate Percentage and TCP Retransmitted Packets rules.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - The percentage of TCP loss rate. Default value is 5.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage
Alert Message
Device {0} has TCP loss packets rate {1} percents.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler UDP Packets Received Rate Usage

Display Name Citrix NetScaler UDP Packets Received Rate Usage
Description
Monitors the rate of UDP packets received.
Knowledge Article
Summary

This monitor checks the rate of UDP packets received.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of UDP packets received. Default value is 10000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler UDP Packets Received Rate Usage
Alert Message
NetScaler appliance {0} has UDP packets received rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler UDP Packets Transmitted Rate Usage

Display Name Citrix NetScaler UDP Packets Transmitted Rate Usage
Description
Monitors the rate of UDP packets transmitted.
Knowledge Article
Summary

This monitor checks the rate of UDP packets transmitted.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of UDP packets transmitted. Default value is 10000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler UDP Packets Transmitted Rate Usage
Alert Message
Device {0} has UDP packets transmitted rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler var Disk Partition Percentage Usage

Display Name Citrix NetScaler var Disk Partition Percentage Usage
Description
Monitors percentage of /var disk partition utilization on NetScaler.
Knowledge Article
Summary

This monitor checks used space in /var partition of the disk, as a percentage.

This is a critical counter.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler var Disk Partition Percentage Usage
Alert Message
Device {0} has /var disk partition usage {1}  percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Fan Speed (RPM) - 0

Display Name Fan Speed (RPM) - 0
Description
Speed of Fan 0 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 0 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 0
Alert Message
Fan 0 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 1

Display Name Fan Speed (RPM) - 1
Description
Speed of Fan 1 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 1 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 1
Alert Message
Fan 1 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 2

Display Name Fan Speed (RPM) - 2
Description
Speed of Fan 2 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 2 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 2 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 2
Alert Message
Fan 2 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 3

Display Name Fan Speed (RPM) - 3
Description
Speed of Fan 3 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 3 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 3 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 3
Alert Message
Fan 3 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - CPU 0

Display Name Fan Speed (RPM) - CPU 0
Description
CPU Fan 0 speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of CPU Fan 0 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. CPU Fan 0 Speed is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - CPU 0
Alert Message
CPU 0 fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - CPU 1

Display Name Fan Speed (RPM) - CPU 1
Description
CPU Fan 1 speed. Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU fan 0. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of CPU Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU Fan 0. CPU Fan 1 is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - CPU 1
Alert Message
CPU 1 fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System

Display Name Fan Speed (RPM) - System
Description
System fan speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. System Fan Speed is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System
Alert Message
System fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System 1

Display Name Fan Speed (RPM) - System 1
Description
System fan 1 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System 1
Alert Message
System fan 1 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System 2

Display Name Fan Speed (RPM) - System 2
Description
System fan 2 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan 2 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System 2
Alert Message
System fan 2 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

High Availability Node - Master State

Display Name High Availability Node - Master State
Description
Checks current master state for NetScaler appliance node.
Knowledge Article
Summary

This monitor checks current master state for the appliance node in context of high availability.

Warning alert is generated whenever "Master State" parameter value is other than "Primary".

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name High Availability Node - Master State
Alert Message
Node master state for NetScaler appliance "{0}" has changed to "{1}".
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

nCore Consistency

Display Name nCore Consistency
Description
Monitors nCore consistency for the appliance.
Knowledge Article
Summary

This monitor checks nCore consistency for the appliance.

The nCore NetScaler uses multiple CPU cores for packet handling, which greatly improves the performance of many NetScaler features.

You can determine your NetScaler build type by looking at the build information on the banner of the NetScaler Graphical User Interface (GUI), or by issuing the "show version" command at the command line. The file extension indicates the build type. In the GUI, an nCore NetScaler has a ".nc" extension. On the command line, the tar file name for an nCore NetScaler contains "_nc".

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name nCore Consistency
Alert Message
Core {0} on {1} appliance is not consistent.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Power Supply 1 Status

Display Name Power Supply 1 Status
Description
Monitors Power Supply 1 status for the appliance.
Knowledge Article
Summary

This monitor checks the Power Supply 1 status.

On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC.

NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit.

Power Supply status can be one of the four:

  • NORMAL

  • FAILED

  • NOT PRESENT

  • NOT SUPPORTED

The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances.

NORMAL and NOT SUPPORTED are "Healthy" statuses.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Power Supply 1 Status
Alert Message
Power Supply 1 on {0} appliance has status: {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 0

Top

Power Supply 2 Status

Display Name Power Supply 2 Status
Description
Monitors Power Supply 2 status for the appliance.
Knowledge Article
Summary

This monitor checks the Power Supply 2 status.

On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC.

NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit.

Power Supply status can be one of the four:

  • NORMAL

  • FAILED

  • NOT PRESENT

  • NOT SUPPORTED

The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances.

NORMAL and NOT SUPPORTED are "Healthy" statuses.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Power Supply 2 Status
Alert Message
Power Supply 2 on {0} appliance has status: {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 0

Top

Protocol IP - Address Lookups Failure Percentage

Display Name Protocol IP - Address Lookups Failure Percentage
Description
Monitors percentage of IP address lookups that failed on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of IPv4 Address Lookups Failure on NetScaler.

When a packet is received on a non-established session, the NetScaler checks if the destination IP address is one of the NetScaler owned IP addresses. This monitor shows percentage of IP lookups that have failed because the destination IP address of the packet does not match any of the NetScaler owned IP addresses.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold value for IP address lookups failure percentage. Default value is 10.

  • CriticalThreshold - Critical threshold value for IP address lookups failure percentage. Default value is 20.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Protocol IP - Address Lookups Failure Percentage
Alert Message
IP Address Lookups Failure on {0} device is {1} percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 10
CriticalThreshold 20
NumberOfSamples 2
CacheExpirationFactor 1

Top

Protocol IP - Land-Attacks

Display Name Protocol IP - Land-Attacks
Description
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.
Knowledge Article
Summary

This monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of land-attack packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Land-Attacks
Alert Message
Number of packets received where source and destination addresses are the same on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Max Non-TCP Clients

Display Name Protocol IP - Max Non-TCP Clients
Description
Attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded.
Knowledge Article
Summary

This monitor checks number of attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Max Non-TCP Clients
Alert Message
Number of attempts to open a new connection to a service for which the maximum limit has been exceeded on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Packets With Bad MAC Sent

Display Name Protocol IP - Packets With Bad MAC Sent
Description
IP packets during IntervalSeconds period of time transmitted with a bad MAC address.
Knowledge Article
Summary

This monitor checks number of IP packets transmitted with a bad MAC address during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of IP packets transmitted with a bad MAC address during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Packets With Bad MAC Sent
Alert Message
Number of packets transmitted with a bad MAC address on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Packets With MTU Length Greater Than 1514 Bytes

Display Name Protocol IP - Packets With MTU Length Greater Than 1514 Bytes
Description
Packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes.
Knowledge Article
Summary

This monitor checks number of IP packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of IP packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Packets With Len > 1514 rcvd
Alert Message
Number of packets received with a length greater than the normal maximum transmission unit of 1514 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Unknown Services

Display Name Protocol IP - Unknown Services
Description
Packets received during IntervalSeconds period of time on a port or service that is not configured.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time on a port or service that is not configured.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time on a port or service that is not configured. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Unknown Services
Alert Message
Number of Unknown Services packets received on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Error Header Packets

Display Name Protocol IPv6 - Error Header Packets
Description
Packets received during IntervalSeconds period of time that contain an error in one or more components of the IPv6 header.
Knowledge Article
Summary

This monitor checks number of error header packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of error header packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Error Header Packets
Alert Message
Number of packets received that contain an error in one or more components of the IPv6 header on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Land-Attacks

Display Name Protocol IPv6 - Land-Attacks
Description
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.
Knowledge Article
Summary

This monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of land-attack packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Land-Attacks
Alert Message
Number of packets received where source and destination addresses are the same on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Reassembled Data Too Big

Display Name Protocol IPv6 - Reassembled Data Too Big
Description
Packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Reassembled Data Too Big
Alert Message
Number of packets received for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Unsupported Next Header

Display Name Protocol IPv6 - Unsupported Next Header
Description
Packets received during IntervalSeconds period of time that contain an unsupported next header. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT.
Knowledge Article
Summary

This monitor checks number of unsupported next header packets received during IntervalSeconds period of time. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of unsupported next header packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Unsupported Next Header
Alert Message
Number of packets received that contain an unsupported next header on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Zero Fragment Length Received

Display Name Protocol IPv6 - Zero Fragment Length Received
Description
Packets received during IntervalSeconds period of time with a fragment length of 0 bytes.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time with a fragment length of 0 bytes.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time with a fragment length of 0 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Zero Fragment Length Received
Alert Message
Number of packets received with a fragment length of 0 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DH authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DH authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end DH authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DSS authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DSS authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end DSS authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end null authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end null authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end RSA authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end null cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSLv3 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor
Alert Message
Total number of back-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end TLSv1 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor
Alert Message
Total number of back-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSLv3 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor
Alert Message
Total number of back-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end TLSv1 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor
Alert Message
Total number of back-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end MD5 hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End MD5 Hashes Total No Change Performance Monitor
Alert Message
Total number of back-end MD5 hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SHA hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End SHA Hashes Total No Change Performance Monitor
Alert Message
Total number of back-end SHA hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate
Description
Monitors the number of back-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate
Description
Monitors the number of back-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate
Description
Monitors the number of back-end DH 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate
Description
Monitors the number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate
Description
Monitors the number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate
Description
Monitors the number of back-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Sessions Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Sessions Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSL sessions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Sessions Total No Change Performance Monitor
Alert Message
Total number of back-end SSL sessions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DSS authorization is used on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DSS authorization is used on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end DSS authorization is used on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end null authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end null authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end RSA authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end null cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv2 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv2 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv2 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv3 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end TLSv1 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor
Alert Message
Total number of front-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv2 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv2 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv2 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv3 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end TLSv1 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor
Alert Message
Total number of front-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end MD5 hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End MD5 Hashes Total No Change Performance Monitor
Alert Message
Total number of front-end MD5 hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SHA hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End SHA Hashes Total No Change Performance Monitor
Alert Message
Total number of front-end SHA hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate
Description
Monitors the number of front-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate
Description
Monitors the number of front-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate
Description
Monitors the number of front-end DH 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate
Description
Monitors the number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate
Description
Monitors the number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate
Description
Monitors the number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA4096 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 4096-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate
Description
Monitors the number of front-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Sessions Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Sessions Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSL sessions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Sessions Total No Change Performance Monitor
Alert Message
Total number of front-end SSL sessions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - SSL Card Status

Display Name Protocol SSL - SSL Card Status
Description
Monitors the status of the SSL card(s).
Knowledge Article
Summary

This monitor checks status of the SSL card(s). It compares the number of SSL crypto cards present on the NetScaler appliance with the number of SSL cards that are UP.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name SSL Card Status
Alert Message
One or more SSL cards present on {0} NetScaler appliance is not UP.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Protocol SSL - SSL Engine Status

Display Name Protocol SSL - SSL Engine Status
Description
Monitors the state of the SSL Engine.
Knowledge Article
Summary

This monitor checks state of the SSL Engine (1=UP/0=DOWN). This state is decided based on SSL Feature/License status and minimum number of cards UP.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name SSL Engine Status
Alert Message
SSL engine state is DOWN on {0} NetScaler appliance.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Protocol SSL - SSL Transactions Total No Change Performance Monitor

Display Name Protocol SSL - SSL Transactions Total No Change Performance Monitor
Description
Monitors change of the total number of SSL transactions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of SSL transactions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - SSL Transactions Total No Change Performance Monitor
Alert Message
Total number of SSL transactions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Temperature Monitor - CPU 0 (Celsius)

Display Name Temperature Monitor - CPU 0 (Celsius)
Description
CPU 0 temperature. 9800 and 9960 platforms display internal chip temperature. This is a critical counter.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of CPU 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

9800 and 9960 platforms display internal chip temperature. CPU 0 Temperature is a critical counter.

Configuration

NetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - CPU 0 (Celsius)
Alert Message
CPU 0 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - CPU 1 (Celsius)

Display Name Temperature Monitor - CPU 1 (Celsius)
Description
CPU 1 temperature. 9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. This is a critical counter.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of CPU 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. CPU 1 Temperature is a critical counter.

Configuration

NetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - CPU 1 (Celsius)
Alert Message
CPU 1 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 0 (Celsius)

Display Name Temperature Monitor - Device 0 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 0.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 0 (Celsius)
Alert Message
Device 0 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 1 (Celsius)

Display Name Temperature Monitor - Device 1 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 1.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 1 (Celsius)
Alert Message
Device 1 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 2 (Celsius)

Display Name Temperature Monitor - Device 2 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 2.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 2 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 2 (Celsius)
Alert Message
Device 2 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 3 (Celsius)

Display Name Temperature Monitor - Device 3 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 3.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 3 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 3 (Celsius)
Alert Message
Device 3 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Internal (Celsius)

Display Name Temperature Monitor - Internal (Celsius)
Description
Internal temperature of health monitoring chip. This is a critical counter.
Knowledge Article
Summary

This monitor checks the internal temperature of health monitoring chip (Celsius) on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Internal Temperature is a critical counter.

Configuration

Internal temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Internal (Celsius)
Alert Message
Internal temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Citrix NetScaler Appliance (v10.x and later)

AAA - Current ICAOnly Sessions Drop

Display Name AAA - Current ICAOnly Sessions Drop
Description
Monitors drop in number of current ICAOnly sessions during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks for drop in the number of current ICAOnly sessions during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for drop in number of current ICAOnly sessions during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Current ICAOnly sessions drop
Alert Message
Number of ICA only sessions on {0} appliance is decreased by more than predefined threshold.

Delta value: {1}
Current number of ICA only sessions: {2}
Target Citrix NetScaler Appliance (v10.x and later)
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current ICAOnly Sessions Minimum

Display Name AAA - Current ICAOnly Sessions Minimum
Description
Monitors if number of current ICAOnly sessions is below minimum specified by Threshold parameter.
Knowledge Article
Summary

This monitor checks if number of current ICAOnly sessions is below minimum specified by Threshold parameter.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Minimum number of current ICAOnly sessions. If lower, monitor goes into warning state. Default value is 5.

Alert Name AAA - Current ICAOnly sessions minimum
Alert Message
Number of current ICAOnly sessions on {0} appliance is below minimum specified by Threshold parameter.

Current ICAOnly sessions: {1}
Target Citrix NetScaler Appliance (v10.x and later)
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5

Top

Citrix NetScaler Appliance Channel

Channel Availability State Monitor

Display Name Channel Availability State Monitor
Description
Monitors current state of Citrix NetScaler channel.
Knowledge Article
Summary

This monitor checks the current state of the specified channel.

The interface state set to UP only if the link state is UP and administrative state is ENABLED.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Skip States - The list of states for which monitoring will be skipped. For state matching regular expression is used. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

  • Healthy States - The list of states which causes health state. For state matching regular expression is used. For example, current interface state has UP, DOWN, PARTIAL-UP values. If the alert is expected for DOWN state only the healthy value needs to set to UP|PARTIAL-UP or .*UP.

External

For more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site.

For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.html site.

Alert Name Channel Availability State Monitor
Alert Message
Channel {0} on {1} device has state: {2}.
Target Citrix NetScaler Appliance Channel
Enabled by default Yes

Health States
Monitor State Health State
Healthy Healthy
Unhealthy Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
IgnoreStates DISABLED
HealthyCondition UP

Top

Citrix NetScaler Appliance IPv4

IPv4 Address Conflict

Display Name IPv4 Address Conflict
Description
Monitors IPv4 Conflicts.
Knowledge Article
Summary

This monitor checks NetScaler system log for IP conflicts.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 3600 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name IPv4 Address Conflict
Alert Message
                        The IP address conflict occurred.
                        Conflicted IP: {0}
                        Detected on NetScaler with IP address: {1}

                        Detailed Info:
                        {2}
                    
Target Citrix NetScaler Appliance IPv4
Enabled by default No

Health States
Monitor State Health State
No IP Conflict Healthy
IP Conflict Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 0.0

Top

Citrix NetScaler Appliance IPv6

IPv6 Address Conflict

Display Name IPv6 Address Conflict
Description
Monitors IPv6 Conflicts.
Knowledge Article
Summary

This monitor checks NetScaler system log for IP conflicts.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 3600 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name IPv6 Address Conflict
Alert Message
                        The IP address conflict occurred.
                        Conflicted IP: {0}
                        Detected on NetScaler with IP address: {1}

                        Detailed Info:
                        {2}
                    
Target Citrix NetScaler Appliance IPv6
Enabled by default No

Health States
Monitor State Health State
No IP Conflict Healthy
IP Conflict Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 0.0

Top

Citrix NetScaler Appliance LDAP Authentication Server

Authentication Server LDAP - Authentication Failures

Display Name Authentication Server LDAP - Authentication Failures
Description
Number of LDAP authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the LDAP authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server LDAP - Authentication failures
Alert Message
The number of authentication failures on LDAP authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance LDAP Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

Citrix NetScaler Appliance Memory Pool

Citrix NetScaler Feature Memory Percentage Usage

Display Name Citrix NetScaler Feature Memory Percentage Usage
Description
Monitors percentage of NetScaler memory used by the feature.
Knowledge Article
Summary

This monitor checks percentage of NetScaler memory used by the feature.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Feature Memory Percentage Usage
Alert Message
{0} feature memory usage on {1} device is {2} percents.
Target Citrix NetScaler Appliance Memory Pool
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 80
CriticalThreshold 95
CacheExpirationFactor 1

Top

Citrix NetScaler Appliance Network Interface

Interface Availability State Monitor

Display Name Interface Availability State Monitor
Description
Monitors current state of Citrix NetScaler Interface.
Knowledge Article
Summary

This monitor checks the current state of the specified interface.

The interface state set to UP only if the link state is UP and administrative state is ENABLED.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Skip States - The list of states for which monitoring will be skipped. For state matching regular expression is used. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

  • Healthy States - The list of states which causes health state. For state matching regular expression is used. For example, current interface state has UP, DOWN, PARTIAL-UP values. If the alert is expected for DOWN state only the healthy value needs to set to UP|PARTIAL-UP or .*UP.

External

For more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site.

For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.html site.

Alert Name Interface Availability State Monitor
Alert Message
Interface {0} on {1} device has state: {2}.
Target Citrix NetScaler Appliance Network Interface
Enabled by default Yes

Health States
Monitor State Health State
Healthy Healthy
Unhealthy Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
IgnoreStates DISABLED
HealthyCondition UP

Top

Citrix NetScaler Appliance Radius Authentication Server

Authentication Server Radius - Authentication Failures

Display Name Authentication Server Radius - Authentication Failures
Description
Number of Radius authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the Radius authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of Radius authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server Radius - Authentication failures
Alert Message
The number of authentication failures on Radius authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance Radius Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

Citrix NetScaler Appliance SSL Certificate

SSL Certificate Expiration Configuration State Monitor

Display Name SSL Certificate Expiration Configuration State Monitor
Description
Monitors state of Citrix NetScaler SSL certificate.
Knowledge Article
Summary

This monitor checks the number of days remaining for the certificate to expire.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • WarningThreshold - The number of days remaining for the certificate to expire after which the warning state is reported. Default value is 20.

  • CriticalThreshold - The number of days remaining for the certificate to expire after which the error state is reported. Default value is 0.

Alert Name SSL Certificate Expiration Configuration State Monitor
Alert Message
SSL Certificate {0} on {1} NetScaler device expires in {2} days.
Target Citrix NetScaler Appliance SSL Certificate
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 20
CriticalThreshold 0
SyncTime
Debug false
CacheExpirationFactor 1.0

Top

Citrix NetScaler Appliance TACACS Authentication Server

Authentication Server TACACS - Authentication Failures

Display Name Authentication Server TACACS - Authentication Failures
Description
Number of TACACS authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the TACACS authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of TACACS authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server TACACS - Authentication failures
Alert Message
The number of authentication failures on TACACS authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance TACACS Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

LB Service

Load Balancing Service - State Monitor

Display Name Load Balancing Service - State Monitor
Description
Monitors state of a Citrix NetScaler load balancing service.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing Service.

This monitor is enabled by default.

Services on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved service state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Service - State Monitor
Alert Message
Load balancing service {0} on {1} device has state: {2}.
Target LB Service
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

LB Service Groups

Load Balancing Service Group - Effective State Monitor

Display Name Load Balancing Service Group - Effective State Monitor
Description
Monitors effective state of a Citrix NetScaler load balancing service group.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing ServiceGroup depending on state of the group members.

This monitor is enabled by default.

ServiceGroup on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • PARTIAL UP

  • PARTIAL DOWN

  • OUT OF SERVICE

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved servicegroup state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Service Group Effective State Monitor
Alert Message
                        Load Balancing Service Group {0} on {1} device has effective state: {2}.

                        Current server state are {3}
                        {4}
                    
Target LB Service Groups
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

LB Virtual Server

Load Balancing Virtual Server - Health Status Percentage

Display Name Load Balancing Virtual Server - Health Status Percentage
Description
Health status percentage in relation to total number of active services bound to the virtual server.
Knowledge Article
Summary

This monitor checks health status percentage in relation to total number of active services bound to the virtual server.

This monitor is enabled by default.

Note that health status percentage is 100% in case when virtual server is disabled (curstate = "OUT OF SERVICE").

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for health status percentage. Default value is 50.

  • CriticalThreshold - Critical threshold for health status percentage. Default value is 0.

Alert Name Load Balancing Virtual Server - Health Status Percentage
Alert Message
Health status percentage for virtual server {0} on {1} NetScaler device is {2}%.
Target LB Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 50
CriticalThreshold 0
SyncTime
Debug false
CacheExpirationFactor 1

Top

Load Balancing Virtual Server - State Monitor

Display Name Load Balancing Virtual Server - State Monitor
Description
Monitors state of a Citrix NetScaler load balancing virtual server.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing Virtual Server.

This monitor is enabled by default.

Virtual servers on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests.

The following are the probable reasons for the status of a virtual server being marked as DOWN:

  • No service is bound to the virtual server.

  • All services bound to the virtual server are not available.

  • The Load Balancing or other related features are not enabled.

  • The Load Balancing or other related features are not licensed.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved virtual server state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Virtual Server - State Monitor
Alert Message
Load balancing virtual server {0} on {1} device has state: {2}.
Target LB Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

NetScaler Appliance (v10.x and later) SSL Action

SSL Action Hits Not Changed

Display Name SSL Action Hits Not Changed
Description
Monitors that specific action hits not changed during predefined interval.
Knowledge Article
Summary

This monitor check hits count for the action. If hits count is not changed for specified time interval it generates an alert.

If some action are rarely executed override the update interval or if disable it.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 3600 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name SSL Action Hits Not Changed
Alert Message
SSL Action hits value for {0} action on {1} NetScaler appliance for long time is not changed.

This usually indicate that there are no traffic which will trigger the action.
Target NetScaler Appliance (v10.x and later) SSL Action
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 1

Top

SSL Action Undef Hits

Display Name SSL Action Undef Hits
Description
Monitors that specific action increasing undef hits.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of undef hits on the action that occurred during IntervalSeconds period of time.

If undef hits for specific period are greater than threshold value an alert is generated.

When the rule evaluation turns out to be undefined undef hits counter is incremented.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name SSL Action Undef Hits
Alert Message
SSL Action undef hits value for {0} action on {1} appliance is increased more than specified by threshold value. 

Increase value is: {2}
Target NetScaler Appliance (v10.x and later) SSL Action
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

NetScaler Appliance (v10.x and later) SSL Policy

SSL Policy Undef Hits

Display Name SSL Policy Undef Hits
Description
Monitors that specific policy increasing undef hits.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of undef hits on the policy that occurred during IntervalSeconds period of time.

If undef hits for specific period are greater than threshold value an alert is generated.

Action to be used by the policy when the rule evaluation turns out to be undefined and in this case undef hits counter is incremented.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name SSL Policy Undef Hits
Alert Message
SSL Policy undef hits value for {0} policy on {1} appliance is increased more than specified by threshold value. 

Increase value is: {2}
Target NetScaler Appliance (v10.x and later) SSL Policy
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

NetScaler Base Class For Setting Component

Appliance Components Configuration Monitoring Availability

Display Name Appliance Components Configuration Monitoring Availability
Description
Checks appliance URL availability for monitoring for specific component.
Knowledge Article
Summary

This monitor checks the appliance availability for monitoring.

Appliance is available for monitoring if access to the appliance using NITRO API is success.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Appliance Configuration Availability
Alert Message
Configuration for appliance {0} cannot be obtained.
Target NetScaler Base Class For Setting Component
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

NetScaler SSL Policy

SSL Policy Hits Not Changed

Display Name SSL Policy Hits Not Changed
Description
Monitors that specific policy hits not changed during predefined interval.
Knowledge Article
Summary

This monitor check hits count for the policy. If hits count is not changed for specified time interval it generates an alert.

If some policies are rarely executed override the update interval or if disable it.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 3600 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name SSL Policy Hits Not Changed
Alert Message
                        SSL Policy hits value for {0} policy on {1} NetScaler appliance for long time is not changed.

                        This usually indicate that there are no traffic which will trigger the policy.
                    
Target NetScaler SSL Policy
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 1

Top


Rules

Citrix NetScaler Access Gateway Virtual Server

Access Gateway Virtual Server - Current AAA Users

Display Name Access Gateway Virtual Server - Current AAA Users
Description
Number of Current AAA users on access gateway virtual server.
Knowledge Article
Summary

This rule collects number of current AAA users on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Current AAA Users

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Current Users Percentage

Display Name Access Gateway Virtual Server - Current Users Percentage
Description
Percentage of Current Users in relation to Maximum Users that can be logged in.
Knowledge Article
Summary

This rule collects percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server.

This rule is enabled by default.

Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values.

The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Current Users Percentage

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Request Bytes (Rate)

Display Name Access Gateway Virtual Server - Request Bytes (Rate)
Description
Request bytes rate on access gateway virtual server.
Knowledge Article
Summary

This rule collects request bytes rate information on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Request Bytes (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Request Bytes Threshold (Rate)

Display Name Access Gateway Virtual Server - Request Bytes Threshold (Rate)
Description
Request bytes rate on access gateway virtual server.
Knowledge Article
Summary

This rule monitors the total number of request bytes received on the service or virtual server. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Default value is 100000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 2.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert True
Alert Name Access Gateway Virtual Server - Request Bytes Threshold (Rate)
Alert Message
Access gateway virtual server {0} on NetScaler device {1} has request bytes rate = {2}.
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Request Rate Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100000
Direction GreaterEqual
NumberOfSamples 2
Priority 0
Severity 0

Top

Access Gateway Virtual Server - Requests (Rate)

Display Name Access Gateway Virtual Server - Requests (Rate)
Description
Requests rate on access gateway virtual server.
Knowledge Article
Summary

This rule collects requests rate information on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Requests (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Requests Threshold (Rate)

Display Name Access Gateway Virtual Server - Requests Threshold (Rate)
Description
Request rate on access gateway virtual server.
Knowledge Article
Summary

This rule monitors the total number of requests received on the service or virtual server. (Rate)

(This applies to HTTP/SSL services and servers.)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Default value is 1000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 2.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert True
Alert Name Access Gateway Virtual Server - Requests Threshold (Rate)
Alert Message
Access gateway virtual server {0} on NetScaler device {1} has requests rate = {2}.
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Requests Rate Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 1000
Direction GreaterEqual
NumberOfSamples 2
Priority 0
Severity 0

Top

Access Gateway Virtual Server - Response Bytes (Rate)

Display Name Access Gateway Virtual Server - Response Bytes (Rate)
Description
Response bytes rate on access gateway virtual server.
Knowledge Article
Summary

This rule collects response bytes rate information on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Response Bytes (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Response Bytes Threshold (Rate)

Display Name Access Gateway Virtual Server - Response Bytes Threshold (Rate)
Description
Response bytes rate on access gateway virtual server.
Knowledge Article
Summary

This rule monitors the total number of response bytes received on the service or virtual server. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Default value is 1000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 2.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert True
Alert Name Access Gateway Virtual Server - Response Bytes Threshold (Rate)
Alert Message
Access gateway virtual server {0} on NetScaler device {1} has response bytes rate = {2}.
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Response Bytes Rate Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100000
Direction GreaterEqual
NumberOfSamples 2
Priority 0
Severity 0

Top

Access Gateway Virtual Server - Responses (Rate)

Display Name Access Gateway Virtual Server - Responses (Rate)
Description
Responses rate on access gateway virtual server.
Knowledge Article
Summary

This rule collects responses rate information on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Responses (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Responses Threshold (Rate)

Display Name Access Gateway Virtual Server - Responses Threshold (Rate)
Description
Responses rate on access gateway virtual server.
Knowledge Article
Summary

This rule monitors the total number of responses received on the service or virtual server. (Rate)

(This applies to HTTP/SSL services and servers.)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Default value is 100000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 2.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert True
Alert Name Access Gateway Virtual Server - Responses Threshold (Rate)
Alert Message
Access gateway virtual server {0} on NetScaler device {1} has responses bytes rate = {2}.
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Responses Rate Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 1000
Direction GreaterEqual
NumberOfSamples 2
Priority 0
Severity 0

Top

Citrix NetScaler Appliance

AAA - AAA Sessions

Display Name AAA - AAA Sessions
Description
Count of all AAA sessions.
Knowledge Article
Summary

This rule collects count of all AAA sessions.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - AAA sessions

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - AAA Sessions (Rate)

Display Name AAA - AAA Sessions (Rate)
Description
Count of all AAA sessions. (Rate)
Knowledge Article
Summary

This rule collects count of all AAA sessions. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - AAA sessions (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Failures

Display Name AAA - Authentication Failures
Description
Count of authentication failures.
Knowledge Article
Summary

This rule collects count of authentication failures.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Authentication failures

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Failures (Rate)

Display Name AAA - Authentication Failures (Rate)
Description
Count of authentication failures. (Rate)
Knowledge Article
Summary

This rule collects count of authentication failures. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Authentication failures (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Success

Display Name AAA - Authentication Success
Description
Count of authentication successes.
Knowledge Article
Summary

This rule collects count of authentication successes.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Authentication successes

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Success (Rate)

Display Name AAA - Authentication Success (Rate)
Description
Count of authentication successes. (Rate)
Knowledge Article
Summary

This rule collects count of authentication successes. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Authentication successes (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Success Ratio

Display Name AAA - Authentication Success Ratio
Description
Percentage of authentication successes in relation to total number of authentication attempts.
Knowledge Article
Summary

This rule collects percentage of authentication successes in relation to total number of authentication attempts.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Authentication Success Ratio

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Current AAA Sessions

Display Name AAA - Current AAA Sessions
Description
Count of current AAA sessions.
Knowledge Article
Summary

This rule collects count of current AAA sessions.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Current AAA sessions

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Current AAA Sessions (Rate)

Display Name AAA - Current AAA Sessions (Rate)
Description
Count of current AAA sessions. (Rate)
Knowledge Article
Summary

This rule collects count of current AAA sessions. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Current AAA sessions (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Failure

Display Name AAA - HTTP Authorization Failure
Description
Count of HTTP connections that failed authorization.
Knowledge Article
Summary

This rule collects count of HTTP connections that failed authorization.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - HTTP authorization failures

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Failure (Rate)

Display Name AAA - HTTP Authorization Failure (Rate)
Description
Count of HTTP connections that failed authorization. (Rate)
Knowledge Article
Summary

This rule collects count of HTTP connections that failed authorization. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - HTTP authorization failures (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Success

Display Name AAA - HTTP Authorization Success
Description
Count of HTTP connections that succeeded authorization.
Knowledge Article
Summary

This rule collects count of HTTP connections that succeeded authorization.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - HTTP authorization successes

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Success (Rate)

Display Name AAA - HTTP Authorization Success (Rate)
Description
Count of HTTP connections that succeeded authorization. (Rate)
Knowledge Article
Summary

This rule collects count of HTTP connections that succeeded authorization. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - HTTP authorization successes (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Success Ratio

Display Name AAA - HTTP Authorization Success Ratio
Description
Percentage of HTTP connections that succeeded authorization in relation to total number of HTTP connections authorization attempts.
Knowledge Article
Summary

This rule collects percentage of HTTP connections that succeeded authorization in relation to total number of HTTP connections authorization attempts.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - HTTP Authorization Success Ratio

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Failures

Display Name AAA - Non HTTP Authorization Failures
Description
Count of non HTTP connections that failed authorization.
Knowledge Article
Summary

This rule collects count of non HTTP connections that failed authorization.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Non HTTP authorization failures

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Failures (Rate)

Display Name AAA - Non HTTP Authorization Failures (Rate)
Description
Count of non HTTP connections that failed authorization. (Rate)
Knowledge Article
Summary

This rule collects count of non HTTP connections that failed authorization. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Non HTTP authorization failures (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Success

Display Name AAA - Non HTTP Authorization Success
Description
Count of non HTTP connections that succeeded authorization.
Knowledge Article
Summary

This rule collects count of non HTTP connections that succeeded authorization.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Non HTTP authorization successes

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Success (Rate)

Display Name AAA - Non HTTP Authorization Success (Rate)
Description
Count of non HTTP connections that succeeded authorization. (Rate)
Knowledge Article
Summary

This rule collects count of non HTTP connections that succeeded authorization. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Non HTTP authorization successes (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Success Ratio

Display Name AAA - Non HTTP Authorization Success Ratio
Description
Percentage of non HTTP connections that succeeded authorization in relation to total number of non HTTP connections authorization attempts.
Knowledge Article
Summary

This rule collects percentage of non HTTP connections that succeeded authorization in relation to total number of non HTTP connections authorization attempts.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Non HTTP Authorization Success Ratio

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Timed Out AAA Sessions

Display Name AAA - Timed Out AAA Sessions
Description
Count of AAA sessions that have timed out.
Knowledge Article
Summary

This rule collects count of AAA sessions that have timed out.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Timed out AAA sessions

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Timed Out AAA Sessions (Rate)

Display Name AAA - Timed Out AAA Sessions (Rate)
Description
Count of AAA sessions that have timed out. (Rate)
Knowledge Article
Summary

This rule collects count of AAA sessions that have timed out. (Rate)

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name AAA - Timed out AAA sessions (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Aborts

Display Name Application Firewall - Aborts
Description
Incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Total)
Knowledge Article
Summary

This rule collects statistics about incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Total).

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Aborts

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Aborts Rate

Display Name Application Firewall - Aborts Rate
Description
Incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Rate)
Knowledge Article
Summary

This rule collects statistics about incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Aborts Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Redirects

Display Name Application Firewall - Redirects
Description
HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Total)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Redirects

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Redirects Rate

Display Name Application Firewall - Redirects Rate
Description
HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Rate)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Redirects Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Requests

Display Name Application Firewall - Requests
Description
HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Total)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Requests

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Requests Rate

Display Name Application Firewall - Requests Rate
Description
HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Rate)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Requests Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Responses

Display Name Application Firewall - Responses
Description
HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Total)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Responses

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Application Firewall - Responses Rate

Display Name Application Firewall - Responses Rate
Description
HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Rate)
Knowledge Article
Summary

This rule collects statistics about HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Application Firewall - Responses Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - 304 Hits Rate

Display Name Cache - 304 Hits Rate
Description
Object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Rate)
Knowledge Article
Summary

This rule collects statistics about object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - 304 Hits Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - 64 Maximum Memory (KB)

Display Name Cache - 64 Maximum Memory (KB)
Description
Largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run.
Knowledge Article
Summary

This rule collects statistics about largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - 64 Maximum memory (KB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Hits Rate

Display Name Cache - Hits Rate
Description
Responses served from the integrated cache. These responses match a policy with a CACHE action. (Rate)
Knowledge Article
Summary

This rule collects statistics about responses served from the integrated cache. These responses match a policy with a CACHE action. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Hits Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Maximum Memory (KB)

Display Name Cache - Maximum Memory (KB)
Description
Largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run.
Knowledge Article
Summary

This rule collects statistics about largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Maximum memory (KB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Maximum Memory Active Value (KB)

Display Name Cache - Maximum Memory Active Value (KB)
Description
Currently active value of maximum memory.
Knowledge Article
Summary

This rule collects statistics about currently active value of maximum memory.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Maximum memory active value (KB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Misses Rate

Display Name Cache - Misses Rate
Description
Intercepted HTTP requests requiring fetches from origin server. (Rate)
Knowledge Article
Summary

This rule collects statistics about intercepted HTTP requests requiring fetches from origin server. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Misses Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Non-304 Hits Rate

Display Name Cache - Non-304 Hits Rate
Description
Total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. (Rate)
Knowledge Article
Summary

This rule collects statistics about total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Non-304 Hits Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Origin Bandwidth Saved (%)

Display Name Cache - Origin Bandwidth Saved (%)
Description
Percentage of origin bandwidth saved, expressed as number of bytes served from the integrated cache divided by all bytes served. The assumption is that all compression is done in the NetScaler.
Knowledge Article
Summary

This rule collects statistics about percentage of origin bandwidth saved, expressed as number of bytes served from the integrated cache divided by all bytes served. The assumption is that all compression is done in the NetScaler.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Origin bandwidth saved (%)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Requests Rate

Display Name Cache - Requests Rate
Description
Total cache hits plus total cache misses. (Rate)
Knowledge Article
Summary

This rule collects statistics about total cache hits plus total cache misses. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Requests Rate

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Total 304 Hits

Display Name Cache - Total 304 Hits
Description
Object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Total)
Knowledge Article
Summary

This rule collects statistics about object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Total 304 Hits

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Total Hits

Display Name Cache - Total Hits
Description
Responses served from the integrated cache. These responses match a policy with a CACHE action. (Total)
Knowledge Article
Summary

This rule collects statistics about responses served from the integrated cache. These responses match a policy with a CACHE action. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Total Hits

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Total Misses

Display Name Cache - Total Misses
Description
Intercepted HTTP requests requiring fetches from origin server. (Total)
Knowledge Article
Summary

This rule collects statistics about intercepted HTTP requests requiring fetches from origin server. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Total Misses

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Total Non-304 Hits

Display Name Cache - Total Non-304 Hits
Description
Total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served.
Knowledge Article
Summary

This rule collects statistics about total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Total Non-304 Hits

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Total Requests

Display Name Cache - Total Requests
Description
Total cache hits plus total cache misses.
Knowledge Article
Summary

This rule collects statistics about total cache hits plus total cache misses.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Total Requests

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Cache - Utilized Memory (KB)

Display Name Cache - Utilized Memory (KB)
Description
Amount of memory the integrated cache is currently using.
Knowledge Article
Summary

This rule collects statistics about amount of memory the integrated cache is currently using.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Cache - Utilized memory (KB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler Device CPU Usage (in %)

Display Name Citrix NetScaler Device CPU Usage (in %)
Description
Collects CPU usage (in percents) of a Citrix NetScaler Device.
Knowledge Article
Summary

This rule collects statistics of NetScaler CPU utilization in percents.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Device
Counter Name CPU Usage in Percent

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler Device Current Memory Allocated (in MB)

Display Name Citrix NetScaler Device Current Memory Allocated (in MB)
Description
Collects statistics of currently allocated memory  on NetScaler device, in megabytes.
Knowledge Article
Summary

This rule collects statistics of NetScaler currently allocated memory, in megabytes.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Current Memory Allocated (in MB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler Device Global Memory Usage (in %)

Display Name Citrix NetScaler Device Global Memory Usage (in %)
Description
Collects statistics of global memory utilization percentage on NetScaler device.
Knowledge Article
Summary

This rule collects statistics of NetScaler global memory utilization in percent.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Global Memory Utilization (in %)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler Device Global Memory Usage (in MB)

Display Name Citrix NetScaler Device Global Memory Usage (in MB)
Description
Collects statistics of global memory utilization in MB on NetScaler device.
Knowledge Article
Summary

This rule collects statistics of NetScaler global memory utilization, in megabytes.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Global Memory Utilization (in MB)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - Compressed Bytes Transmitted (Rate)

Display Name Compression - Compressed Bytes Transmitted (Rate)
Description
Number of bytes the NetScaler sends to the client after compressing the response from the server. (Rate)
Knowledge Article
Summary

This rule collects statistics about number of bytes the NetScaler sends to the client after compressing the response from the server. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - Compressed bytes transmitted (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - Compressed Bytes Transmitted (Total)

Display Name Compression - Compressed Bytes Transmitted (Total)
Description
Number of bytes the NetScaler sends to the client after compressing the response from the server. (Total)
Knowledge Article
Summary

This rule collects statistics about number of bytes the NetScaler sends to the client after compressing the response from the server. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - Compressed bytes transmitted (Total)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - Compressible Bytes Received (Rate)

Display Name Compression - Compressible Bytes Received (Rate)
Description
Number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Rate)
Knowledge Article
Summary

This rule collects statistics about number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Rate)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - Compressible bytes received (Rate)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - Compressible Bytes Received (Total)

Display Name Compression - Compressible Bytes Received (Total)
Description
Number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Total)
Knowledge Article
Summary

This rule collects statistics about number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Total)

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - Compressible bytes received (Total)

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - HTTP Compression Ratio

Display Name Compression - HTTP Compression Ratio
Description
Ratio of the compressible data received from the server to the compressed data sent to the client.
Knowledge Article
Summary

This rule collects statistics about ratio of the compressible data received from the server to the compressed data sent to the client.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - HTTP compression ratio

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Compression - Total HTTP Compression Ratio

Display Name Compression - Total HTTP Compression Ratio
Description
Ratio of total HTTP data received to total HTTP data transmitted.
Knowledge Article
Summary

This rule collects statistics about ratio of total HTTP data received to total HTTP data transmitted.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$
Counter Name Compression - Total HTTP compression ratio

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Config Param Change Feature AppFlow State

Display Name Config Param Change Feature AppFlow State
Description
Monitors change of NetScaler Feature settings, AppFlow feature state.
Knowledge Article
Summary

This rule monitors AppFlow feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature AppFlow State
Alert Message
Citrix NetScaler Feature configuration settings, AppFlow feature state (appflow) has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - AppFlow State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Application Firewall State

Display Name Config Param Change Feature Application Firewall State
Description
Monitors change of NetScaler Feature settings, application firewall feature state.
Knowledge Article
Summary

This rule monitors Application Firewall feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Application Firewall State
Alert Message
Citrix NetScaler Feature configuration settings, application firewall feature state (appfw) has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Application Firewall State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Authentication Authorization Auditing State

Display Name Config Param Change Feature Authentication Authorization Auditing State
Description
Monitors change of NetScaler Feature settings, authentication, authorization and auditing feature state.
Knowledge Article
Summary

This rule monitors authentication, authorization and auditing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Authentication Authorization Auditing State
Alert Message
Citrix NetScaler Feature configuration settings, authentication, authorization and auditing feature state (aaa) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - AAA State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature BGP Routing State

Display Name Config Param Change Feature BGP Routing State
Description
Monitors change of NetScaler Feature settings, BGP routing feature state.
Knowledge Article
Summary

This rule monitors BGP Routing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature BGP Routing State
Alert Message
Citrix NetScaler Feature configuration settings, BGP routing feature (bgp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - BGP Routing State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Cache Redirect State

Display Name Config Param Change Feature Cache Redirect State
Description
Monitors change of NetScaler Feature settings, cache redirect feature state.
Knowledge Article
Summary

This rule monitors Cache Redirect feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Cache Redirect State
Alert Message
Citrix NetScaler Feature configuration settings, cache redirect feature state (cr) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Cache Redirect State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Cloud Bridge State

Display Name Config Param Change Feature Cloud Bridge State
Description
Monitors change of NetScaler Feature settings, cloud bridge feature state.
Knowledge Article
Summary

This rule monitors cloud bridge feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Cloud Bridge State
Alert Message
Citrix NetScaler Feature configuration settings, cloud bridge feature state (cloudbridge) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Cloud Bridge State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Compression State

Display Name Config Param Change Feature Compression State
Description
Monitors change of NetScaler Feature settings, compression feature state.
Knowledge Article
Summary

This rule monitors Compression feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Compression State
Alert Message
Citrix NetScaler Feature configuration settings, compression feature state (cmp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Compression State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Content Filter State

Display Name Config Param Change Feature Content Filter State
Description
Monitors change of NetScaler Feature settings, content filter feature state.
Knowledge Article
Summary

This rule monitors Content Filter feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Content Filter State
Alert Message
Citrix NetScaler Feature configuration settings, content filter feature state (cf) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Content Filter State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Content Switching State

Display Name Config Param Change Feature Content Switching State
Description
Monitors change of NetScaler Feature settings, content switching feature state.
Knowledge Article
Summary

This rule monitors Content Switching feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Content Switching State
Alert Message
Citrix NetScaler Feature configuration settings, content switching feature state (cs) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Content Switching State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature DOS Protection State

Display Name Config Param Change Feature DOS Protection State
Description
Monitors change of NetScaler Feature settings, DOS protection feature state.
Knowledge Article
Summary

This rule monitors DOS Protection feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature DOS Protection State
Alert Message
Citrix NetScaler Feature configuration settings, DOS protection feature state (hdosp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - DOS Protection State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature GSLB State

Display Name Config Param Change Feature GSLB State
Description
Monitors change of NetScaler Feature settings, global server load balancing feature state.
Knowledge Article
Summary

This rule monitors Global Server Load Balancing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature GSLB State
Alert Message
Citrix NetScaler Feature configuration settings, GSLB feature state (gslb) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - GSLB State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature HTML Injection State

Display Name Config Param Change Feature HTML Injection State
Description
Monitors change of NetScaler Feature settings, HTML injection feature state.
Knowledge Article
Summary

This rule monitors HTML Injection feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature HTML Injection State
Alert Message
Citrix NetScaler Feature configuration settings, HTML injection feature state (htmlinjection) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - HTML Injection State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Integrated Caching State

Display Name Config Param Change Feature Integrated Caching State
Description
Monitors change of NetScaler Feature settings, integrated caching feature state.
Knowledge Article
Summary

This rule monitors Integrated Caching feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Integrated Caching State
Alert Message
Citrix NetScaler Feature configuration settings, integrated caching feature state (ic) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Integrated Caching State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature IPv6 Translation State

Display Name Config Param Change Feature IPv6 Translation State
Description
Monitors change of NetScaler Feature settings, IPv6 protocol translation feature state.
Knowledge Article
Summary

This rule monitors IPv6 protocol translation feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature IPv6 Translation State
Alert Message
Citrix NetScaler Feature configuration settings, IPv6 translation feature state (ipv6pt) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - IPv6 Translation State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Load Balancing State

Display Name Config Param Change Feature Load Balancing State
Description
Monitors change of NetScaler Feature settings, load balancing feature state.
Knowledge Article
Summary

This rule monitors Load Balancing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Load Balancing State
Alert Message
Citrix NetScaler Feature configuration settings, load balancing feature state (lb) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Load Balancing State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature OSPF Routing State

Display Name Config Param Change Feature OSPF Routing State
Description
Monitors change of NetScaler Feature settings, OSPF routing feature state.
Knowledge Article
Summary

This rule monitors OSPF Routing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature OSPF Routing State
Alert Message
Citrix NetScaler Feature configuration settings, OSPF routing feature state (ospf) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - OSPF Routing State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Priority Queuing State

Display Name Config Param Change Feature Priority Queuing State
Description
Monitors change of NetScaler Feature settings, priority queuing feature state.
Knowledge Article
Summary

This rule monitors Priority Queuing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Priority Queuing State
Alert Message
Citrix NetScaler Feature configuration settings, priority queuing feature state (pq) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Priority Queuing State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Push State

Display Name Config Param Change Feature Push State
Description
Monitors change of NetScaler Feature settings, NetScaler push feature state.
Knowledge Article
Summary

This rule monitors NetScaler Push feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Push State
Alert Message
Citrix NetScaler Feature configuration settings, NetScaler push feature state (push) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - NetScaler Push State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Responder State

Display Name Config Param Change Feature Responder State
Description
Monitors change of NetScaler Feature settings, responder feature state.
Knowledge Article
Summary

This rule monitors Responder feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Responder State
Alert Message
Citrix NetScaler Feature configuration settings, responder feature state (responder) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Responder State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Rewrite State

Display Name Config Param Change Feature Rewrite State
Description
Monitors change of NetScaler Feature settings, rewrite feature state.
Knowledge Article
Summary

This rule monitors Rewrite feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Rewrite State
Alert Message
Citrix NetScaler Feature configuration settings, rewrite feature state (rewrite) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Rewrite State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature RIP Routing State

Display Name Config Param Change Feature RIP Routing State
Description
Monitors change of NetScaler Feature settings, RIP routing feature state.
Knowledge Article
Summary

This rule monitors RIP Routing feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature RIP Routing State
Alert Message
Citrix NetScaler Feature configuration settings, RIP routing feature state (rip) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - RIP Routing State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature SSL State

Display Name Config Param Change Feature SSL State
Description
Monitors change of NetScaler Feature settings, SSL feature state.
Knowledge Article
Summary

This rule monitors Secure Sockets Layer feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature SSL State
Alert Message
Citrix NetScaler Feature configuration settings, SSL feature state (ssl) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - SSL State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature SSL VPN State

Display Name Config Param Change Feature SSL VPN State
Description
Monitors change of NetScaler Feature settings, SSL VPN feature state.
Knowledge Article
Summary

This rule monitors SSL VPN feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature SSL VPN State
Alert Message
Citrix NetScaler Feature configuration settings, SSL VPN feature state (sslvpn) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - SSL VPN State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Sure Connect State

Display Name Config Param Change Feature Sure Connect State
Description
Monitors change of NetScaler Feature settings, sure connect feature state.
Knowledge Article
Summary

This rule monitors Sure Connect feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Sure Connect State
Alert Message
Citrix NetScaler Feature configuration settings, sure connect feature state (sc) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Sure Connect State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Surge Protection State

Display Name Config Param Change Feature Surge Protection State
Description
Monitors change of NetScaler Feature settings, surge protection feature state.
Knowledge Article
Summary

This rule monitors Surge Protection feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Surge Protection State
Alert Message
Citrix NetScaler Feature configuration settings, surge protection feature state (sp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Surge Protection State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Feature Web Logging State

Display Name Config Param Change Feature Web Logging State
Description
Monitors change of NetScaler Feature settings, web logging feature state.
Knowledge Article
Summary

This rule monitors Web Logging feature enable/disable state.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Feature Web Logging State
Alert Message
Citrix NetScaler Feature configuration settings, web logging feature state (wl) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Feature
Counter Name Feature Param - Web Logging State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Base Threshold

Display Name Config Param Change Global Base Threshold
Description
Monitors change of NetScaler Global settings, the base threshold.
Knowledge Article
Summary

This rule monitors change of the base threshold parameter in Citrix NetScaler configuration.

This is the maximum number of server connections that can be opened before surge protection is activated.

Default value: 200

Minimum value = 0

Maximum value = 32767.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Base Threshold
Alert Message
Citrix NetScaler Global configuration settings, base threshold (basethreshold) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Base Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Exclusive Quota Max Client

Display Name Config Param Change Global Exclusive Quota Max Client
Description
Monitors change of NetScaler Global settings, the percentage of maxClient to be given to PEs.
Knowledge Article
Summary

This rule monitors change of the percentage of maxClient to be given to PEs.

Default value: 80

Minimum value = 0

Maximum value = 100.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Exclusive Quota Max Client
Alert Message
Citrix NetScaler Global configuration settings, percentage of maxClient given to PEs (exclusivequotamaxclient) has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Exclusive Quota Max Client

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Exclusive Quota Spillover

Display Name Config Param Change Global Exclusive Quota Spillover
Description
Monitors change of NetScaler Global settings, the percentage of max limit to be given to PEs.
Knowledge Article
Summary

This rule monitors change of the percentage of max limit to be given to PEs.

Default value: 80

Minimum value = 0

Maximum value = 100.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Exclusive Quota Spillover
Alert Message
Citrix NetScaler Global configuration settings, percentage of max limit to PEs  (exclusivequotaspillover) has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Exclusive Quota Spillover

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Grant Quota Max Client

Display Name Config Param Change Global Grant Quota Max Client
Description
Monitors change of NetScaler Global settings, the percentage of shared quota to be granted at a time for maxClient.
Knowledge Article
Summary

This rule monitors change of the percentage of shared quota to be granted at a time for maxClient.

Default value: 10

Minimum value = 0

Maximum value = 100.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Grant Quota Max Client
Alert Message
Citrix NetScaler Global configuration settings, percentage of shared quota for maxClient (grantquotamaxclient) has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Grant Quota Max Client

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Grant Quota Spillover

Display Name Config Param Change Global Grant Quota Spillover
Description
Monitors change of NetScaler Global settings, the percentage of shared quota to be granted at a time for spillover.
Knowledge Article
Summary

This rule monitors change of the percentage of shared quota to be granted at a time for spillover.

Default value: 10

Minimum value = 0

Maximum value = 100.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Grant Quota Spillover
Alert Message
Citrix NetScaler Global configuration settings, percentage of spillover quota (grantquotaspillover) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Grant Quota Spillover

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global ICMP Packets Threshold

Display Name Config Param Change Global ICMP Packets Threshold
Description
Monitors change of NetScaler Global settings, the number of ICMP packets permitted per 10 milliseconds.
Knowledge Article
Summary

This rule monitors change of the number of ICMP packets permitted per 10 milliseconds.

Default value: 100.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global ICMP Packets Threshold
Alert Message
Citrix NetScaler Global configuration settings, ICMP packets threshold (icmpthreshold) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - ICMP Packets Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Log Transaction Buffer Size (MB)

Display Name Config Param Change Global Log Transaction Buffer Size (MB)
Description
Monitors change of NetScaler Global settings, the buffer size (in MB) allocated for log transaction data on the system.
Knowledge Article
Summary

This rule monitors change of the buffer size (in MB) allocated for log transaction data on the system.

Maximum value is limited by the memory available in the system.

Minimum value = 1

Maximum value = 4294967294LU.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Log Transaction Buffer Size (MB)
Alert Message
Citrix NetScaler Global configuration settings, buffer size for log transaction  (buffersizemb) has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Log Transaction Buffer Size in MB

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global Min Path MTU

Display Name Config Param Change Global Min Path MTU
Description
Monitors change of NetScaler Global settings, the minimum Path MTU.
Knowledge Article
Summary

This rule monitors change of the minimum Path MTU.

Default value: 576

Minimum value = 168

Maximum value = 1500.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global Min Path MTU
Alert Message
Citrix NetScaler Global configuration settings, minimum path MTU (pmtumin) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - Min Path MTU

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global PMTU Timeout

Display Name Config Param Change Global PMTU Timeout
Description
Monitors change of NetScaler Global settings, PMTU timeout value in minutes.
Knowledge Article
Summary

This rule monitors change of the timeout value in minutes.

Default value: 10

Minimum value = 1

Maximum value = 1440.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global PMTU Timeout
Alert Message
Citrix NetScaler Global configuration settings, PMTU timeout (pmtutimeout) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - PMTU Timeout

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global RBA Response State

Display Name Config Param Change Global RBA Response State
Description
Monitors change of NetScaler Global settings, whether RBA on response is enabled/disabled.
Knowledge Article
Summary

This rule monitors change of configuration parameter that specifies whether RBA on response is enabled/disabled.

Default value: ENABLED

Possible values = ENABLED, DISABLED.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global RBA Response State
Alert Message
Citrix NetScaler Global configuration settings, state of  RBA on response (rbaonresponse) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - RBA Response State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global TCP Proxy State

Display Name Config Param Change Global TCP Proxy State
Description
Monitors change of NetScaler Global settings, the state of TCP proxy.
Knowledge Article
Summary

This rule monitors the state of TCP proxy parameter in Citrix NetScaler configuration.

Default value: ENABLED

Possible values = ENABLED, DISABLED.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global TCP Proxy State
Alert Message
Citrix NetScaler Global configuration settings, state of TCP proxy (tcpproxy) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.).
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - TCP Proxy State

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0
Severity 0

Top

Config Param Change Global TCP SYN Threshold

Display Name Config Param Change Global TCP SYN Threshold
Description
Monitors change of NetScaler Global settings, the number of SYNs permitted per 10 millisecond.
Knowledge Article
Summary

This rule monitors change of the number of SYN packets permitted per 10 milliseconds.

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Priority - Alert priority. Default value is 0.

  • Severity - Alert severity. Default value is 0.

Target Citrix NetScaler Appliance
Enabled by default No
Category PerformanceCollection
Generate Alert True
Alert Name Config Param Change Global TCP SYN Threshold
Alert Message
Citrix NetScaler Global configuration settings, TCP SYN threshold (tcpthreshold) parameter has been changed to {0} in NetScaler Appliance {1}.
Object Name NetScaler Configuration Change - Global
Counter Name Global Param - TCP SYN Threshold

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1
Priority 0