Display Name | Citrix Management Pack Library |
---|---|
Version | 1.0.8.0 |
Description | Common definitions for Citrix Management Packs. |
Display Name | Citrix NetScaler Appliance (v10.x and later) Discovery Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | This management pack discovers components of Citrix NetScaler appliances (v10.x and later). | |
Knowledge Article |
SummaryThis management pack contains discoveries for Citrix NetScaler appliances (versions 10.x and later). |
Display Name | Citrix NetScaler Appliance (v10.x and later) Component Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | Components Library for Citrix NetScaler Appliance (v10.x and later). | |
Knowledge Article |
SummaryThis is the core management pack for monitoring Citrix NetScaler appliances (versions 10.x and later). |
Display Name | Citrix NetScaler Appliance (v10.x and later) Monitoring Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | Monitoring Library for Citrix NetScaler (v10.x and later). | |
Knowledge Article |
SummaryThis management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (versions 10.x and later). |
Display Name | Citrix NetScaler Appliance (v9.x) Discovery Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | This management pack discovers components of Citrix NetScaler appliances (v9.x). | |
Knowledge Article |
SummaryThis management pack contains discoveries for Citrix NetScaler appliances (versions 9.x). |
Display Name | Citrix NetScaler Appliance (v9.x) Component Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | Component Library for Citrix NetScaler (v9.x). | |
Knowledge Article |
SummaryThis is the core management pack for monitoring Citrix NetScaler appliances (versions 9.x). |
Display Name | Citrix NetScaler Device Discovery Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | This management pack discovers Citrix NetScaler network devices. | |
Knowledge Article |
SummaryThis management pack contains class definitions and discoveries for Citrix NetScaler network devices. The devices are discovered as SNMP devices. They are identified according to their "System Object ID" property. |
Display Name | Citrix NetScaler Appliance Component Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | Component Library for Citrix NetScaler (all versions). | |
Knowledge Article |
SummaryThis is the core management pack for monitoring Citrix NetScaler appliances (all versions). |
Display Name | Citrix NetScaler Module Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | This management pack contains probes for Citrix NetScaler monitoring. | |
Knowledge Article |
SummaryThis management pack contains probes for Citrix NetScaler monitoring. Probes are implemented by using managed code. |
Display Name | Citrix NetScaler Monitoring Library | |
---|---|---|
Version | 1.16.13.0 | |
Description | Monitoring Library for Citrix NetScaler (all versions). | |
Knowledge Article |
SummaryThis management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (all versions). |
Target | Display Name | Description | Enabled by default | Discovery interval |
---|---|---|---|---|
Citrix NetScaler Device Group | Citrix NetScaler Device Group Population Discovery |
Citrix NetScaler Device Group Member population Discovery. |
Yes | --- |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Access Gateway Global Settings Discovery |
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Access Gateway Global Settings Discovery |
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Access Gateway Policy Discovery |
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Access Gateway Policy Discovery |
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Access Gateway Virtual Server For NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Access Gateway Virtual Server Authentication Policy Relationship Discovery |
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x Access Gateway Virtual Server | Citrix NetScaler Appliance (v9.x) Access Gateway Virtual Server Authentication Policy Relationship Discovery |
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) BridgeGroup Discovery |
Discovers BridgeGroup for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) BridgeGroup Discovery |
Discovers BridgeGroup for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) Bridge Group | Citrix NetScaler Appliance (v10.x and later) BridgeGroup Relationships Discovery |
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x Bridge Group | Citrix NetScaler Appliance (v9.x) BridgeGroup Relationships Discovery |
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server CERT Discovery |
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Authentication Server CERT Discovery |
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Certificate Discovery |
Discovers Certificate for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Certificate Discovery |
Discovers Certificate for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Channel Discovery |
Discovers Channels for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Channel Discovery |
Discovers Channels for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Network Device | Citrix NetScaler Appliance Discovery (v10.x and later) |
Discovers Citrix NetScaler Appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Network Device | Citrix NetScaler Appliance (v9.x) Discovery |
Discovers Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Node | Citrix NetScaler Device Discovery |
Discovers Citrix NetScaler Device using SNMP from Network device list. |
Yes | 14400 sec |
Windows Server | Citrix MPNS Agent Service Discovery |
Discovers Citrix NetScaler MP Agent used for monitoring Citrix NetScaler appliance. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Interface Discovery |
Discovers Interfaces for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Interface Discovery |
Discovers Interfaces for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) IP Version 4 Discovery |
Discovers IP Version 4 for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) IP Version 4 Discovery |
Discovers IP Version 4 for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) IP Version 6 Discovery |
Discovers IP Version 6 for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) IP Version 6 Discovery |
Discovers IP Version 6 for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server LDAP Discovery |
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Authentication Server LDAP Discovery |
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Discovery |
Discovers load balance service for the Citrix NetScaler appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Load Balancing Service Discovery |
Discovers load balance service for the Citrix NetScaler appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Group Discovery |
Discovers load balance service group for the Citrix NetScaler appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Load Balancing Service Group Discovery |
Discovers load balance service group for the Citrix NetScaler appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Discovery |
Discovers load balance virtual server for the Citrix NetScaler appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Discovery |
Discovers load balance virtual server for the Citrix NetScaler appliance v9.x. |
Yes | 14400 sec |
Windows Computer | Citrix Computer Discovery |
Discovers managed nodes with Citrix software installed on it. |
Yes | 3600 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Memory Feature Discovery |
Discovers Memory Pools for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Memory Feature Discovery |
Discovers Memory Pools for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server Negotiate Discovery |
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Authentication Server Negotiate Discovery |
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) NetBridge Discovery |
Discovers NetBridge for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) NetBridge Discovery |
Discovers NetBridge for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) Network Bridge | Citrix NetScaler Appliance (v10.x and later) NetBridge Relationships Discovery |
Discovers NetBridge Relationships for a Citrix NetScaler Appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x Network Bridge | Citrix NetScaler Appliance (v9.x) NetBridge Relationship Discovery |
Discovers NetBridge Relationships for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Policy Discovery |
Discovers Policies for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Policy Discovery |
Discovers Policies for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Policy Action Discovery |
Discovers Policy Actions for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Policy Action Discovery |
Discovers Policy Actions for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server Radius Discovery |
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Authentication Server Radius Discovery |
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Discovery |
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Discovery |
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Group Discovery |
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Group Discovery |
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance v9.x. |
Yes | 14400 sec |
NetScaler Appliance (v10.x and later) SSL Action | Citrix NetScaler Appliance (v10.x and later) SSL Policy - Action Relationship Discovery |
Discovers relationship between SSL Policy and SSL Policy Action objects. |
Yes | 14400 sec |
NetScaler Appliance v9.x SSL Action | Citrix NetScaler Appliance (v9.x) SSL Policy - Action Relationship Discovery |
Discovers relationship between SSL Policy and SSL Policy Action objects. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server SAML Discovery |
Discovers SAML Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Settings Discovery |
Discovers Settings for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Settings Discovery |
Discovers Settings for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Authentication Server TACACS Discovery |
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Authentication Server TACACS Discovery |
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) Virtual LAN Discovery |
Discovers Virtual LAN for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) Virtual LAN Discovery |
Discovers Virtual LAN for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) Virtual LAN | Citrix NetScaler Appliance (v10.x and later) VLAN Relationships Discovery |
Discovers VLAN Relationships for a Citrix NetScaler Appliance (v10.x and later). |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x Virtual LAN | Citrix NetScaler Appliance (v9.x) VLAN Relationship Discovery |
Discovers VLAN Relationships for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliance (v10.x and later) | Citrix NetScaler Appliance (v10.x and later) VPN Virtual Server Discovery |
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v10.x and later. |
Yes | 14400 sec |
Citrix NetScaler Appliance v9.x | Citrix NetScaler Appliance (v9.x) VPN Virtual Server Discovery |
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v9.x. |
Yes | 14400 sec |
Citrix NetScaler Appliances | Populate Citrix NetScaler Appliance Root With Appliance |
Makes containment relationships between the "Citrix NetScaler Appliance" and the "Citrix Appliance Root" objects. |
Yes | --- |
Citrix Management | Populate Citrix NetScaler Root Object |
Makes hosting relationships between the "Citrix NetScaler Appliances" and the "Citrix Management" object. |
Yes | --- |
All NetScaler Service Groups | Populate All Load Balancing Service Groups Group |
Populates a group with all load balancing service groups. |
Yes | --- |
All NetScaler Services | Populate All Load Balancing Service Group |
Populates a group with all load balancing service. |
Yes | --- |
All Load Balance Virtual Servers | Populate All Load Balancing Virtual Server Group |
Populates a group with all load balancing virtual server. |
Yes | --- |
Display Name | Access Gateway Virtual Server - Availability State Monitor | |
---|---|---|
Description |
Monitors state of a Citrix NetScaler access gateway virtual server. |
|
Knowledge Article |
SummaryThis monitor checks the current state of Citrix NetScaler Access Gateway Virtual Server. This monitor is enabled by default. Virtual servers on a NetScaler appliance can have any of the following statuses:
The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests. DOWN status indicates configuration problems (example: SSL Offload disabled or no SSL certificate bound to the virtual server). ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Availability State Monitor | |
Alert Message |
Access Gateway Virtual Server {0} on {1} device has state: {2}. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
Display Name | Access Gateway Virtual Server - Current Users Percentage | |
---|---|---|
Description |
Percentage of Current Users in relation to Maximum Users that can be logged in. |
|
Knowledge Article |
SummaryThis monitor checks percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server. This monitor is enabled by default. Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values. The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Current Users Percentage | |
Alert Message |
Current users percentage on Access Gateway Virtual Server named {0} on {1} device is {2}. Max Users: {3} Current Users: {4} |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of total number of request bytes received on a Citrix NetScaler VPN (virtual) server. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of request bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued. (This applies to HTTP/SSL services and servers.) This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor | |
Alert Message |
Total number of (HTTP/SSL) request bytes received by access gateway virtual server {0} on NetScaler device {1} did not change for a while. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Access Gateway Virtual Server - Requests Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of total number of requests received on a Citrix NetScaler VPN (virtual) server. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of requests received on the service or virtual server. If there is no change the warning state is reported and an alert is issued. (This applies to HTTP/SSL services and servers.) This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Requests Total No Change Performance Monitor | |
Alert Message |
Total number of (HTTP/SSL) requests received by access gateway virtual server {0} on NetScaler device {1} did not change for a while. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of total number of response bytes received on a Citrix NetScaler VPN (virtual) server. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of response bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued. (This applies to HTTP/SSL services and servers.) This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor | |
Alert Message |
Total number of (HTTP/SSL) response bytes received by access gateway virtual server {0} on NetScaler device {1} did not change for a while. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Access Gateway Virtual Server - Responses Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of total number of responses received on a Citrix NetScaler VPN (virtual) server. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of responses received on the service or virtual server. If there is no change the warning state is reported and an alert is issued. (This applies to HTTP/SSL services and servers.) This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway Virtual Server - Responses Total No Change Performance Monitor | |
Alert Message |
Total number of (HTTP/SSL) responses received by access gateway virtual server {0} on NetScaler device {1} did not change for a while. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | VPN Server Requests Rate Performance Monitor | |
---|---|---|
Description |
Monitors requests rate of a Citrix NetScaler VPN (virtual) server. |
|
Knowledge Article |
SummaryThis monitor checks the total number of requests received on a Citrix NetScaler VPN (virtual) server. Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.). This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | VPN Server Requests Rate Performance Monitor | |
Alert Message |
VPN server {0} on {1} device has requests rate: {2}. |
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 900 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Failure Ratio | |
---|---|---|
Description |
Percentage of authentication failures in relation to total number of authentication attempts. |
|
Knowledge Article |
SummaryThis monitor checks percentages of authentication failures in relation to total number of authentication attempts. This monitor is enabled by default. "Authentication Failure Ratio" is calculated using "Authentication successes" and "Authentication failures" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Authentication Failure Ratio | |
Alert Message |
Current Authentication Failure Ratio (in percentages) on {0} device is {1}. Authentication successes: {2} Authentication failures: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Failures | |
---|---|---|
Description |
Number of authentication failures during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of authentication failures that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Authentication failures | |
Alert Message |
Number of authentication failures on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Display Name | AAA - Current AAA Sessions Drop | |
---|---|---|
Description |
Monitors drop in number of current AAA sessions during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks for drop in the number of current AAA sessions during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Current AAA sessions drop | |
Alert Message |
Number of AAA sessions on {0} appliance is decreased by more than predefined threshold. Delta value: {1} Current number of AAA sessions: {2} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Display Name | AAA - Current AAA Sessions Minimum | |
---|---|---|
Description |
Monitors if number of current AAA sessions is below minimum specified by Threshold parameter. |
|
Knowledge Article |
SummaryThis monitor checks if number of current AAA sessions is below minimum specified by Threshold parameter. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Current AAA sessions minimum | |
Alert Message |
Number of current AAA sessions on {0} appliance is below minimum specified by Threshold parameter. Current AAA sessions: {1} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Ok | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 5 |
Display Name | AAA - HTTP Authorization Failure Ratio | |
---|---|---|
Description |
Percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts. |
|
Knowledge Article |
SummaryThis monitor checks percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts. This monitor is enabled by default. "HTTP Authorization Failure Ratio" is calculated using "HTTP authorization successes" and "HTTP authorization failures" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - HTTP Authorization Failure Ratio | |
Alert Message |
Current HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}. HTTP Authorization successes: {2} HTTP Authorization failures: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Failures | |
---|---|---|
Description |
Number of HTTP authorization failures during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of HTTP authorization failures that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - HTTP authorization failures | |
Alert Message |
Number of HTTP authorization failures on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Display Name | AAA - Non HTTP Authorization Failure Ratio | |
---|---|---|
Description |
Percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts. |
|
Knowledge Article |
SummaryThis monitor checks percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts. This monitor is enabled by default. "Non HTTP Authorization Failure Ratio" is calculated using "Non HTTP authorization successes" and "Non HTTP authorization failures" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Non HTTP Authorization Failure Ratio | |
Alert Message |
Current Non HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}. Non HTTP Authorization successes: {2} Non HTTP Authorization failures: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Failures | |
---|---|---|
Description |
Number of non HTTP authorization failures during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of non HTTP authorization failures that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Non HTTP authorization failures | |
Alert Message |
Number of non HTTP authorization failures on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Display Name | Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage | |
---|---|---|
Description |
Percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures). |
|
Knowledge Article |
SummaryThis monitor checks percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures). This monitor is enabled by default. "STA connection failure percentage" is calculated using "CPS connection failure" and "CPS connection success" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage | |
Alert Message |
Current CPS Connection Failure Percentage on {0} device is {1}. CPS connection successes: {2} CPS connection failure: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway VPN CSG Statistics - SOCKS Client Errors | |
---|---|---|
Description |
SOCKS client errors that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of SOCKS client errors occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN CSG Statistics - SOCKS client errors | |
Alert Message |
Number of recent SOCKS client errors on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN CSG Statistics - SOCKS Server Errors | |
---|---|---|
Description |
SOCKS server errors that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of SOCKS server errors occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN CSG Statistics - SOCKS server errors | |
Alert Message |
Number of recent SOCKS server errors on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN CSG Statistics - STA Connection Failure Percentage | |
---|---|---|
Description |
Percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures). |
|
Knowledge Article |
SummaryThis monitor checks percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures). This monitor is enabled by default. "STA connection failure percentage" is calculated using "STA connection failure" and "STA connection success" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN CSG Statistics - STA Connection Failure Percentage | |
Alert Message |
Current STA Connection Failure Percentage on {0} device is {1}. STA connection successes: {2} STA connection failure: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway VPN General - Login-page Delivery Failure Percentage | |
---|---|---|
Description |
Percentage of Login-page Delivery Failures in relation to total number of Login-page requests received. |
|
Knowledge Article |
SummaryThis monitor checks percentage of Login-page Delivery Failures in relation to total number of Login-page requests received. This monitor is enabled by default. "Login-page delivery failure percentage" is calculated using "Login-page delivery failures" and "Login-page requests received" values. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN General - Login-page Delivery Failure Percentage | |
Alert Message |
Current Login-page Delivery Failure Percentage on {0} device is {1}. Login-page requests received: {2} Login-page delivery failures: {3} |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled | |
---|---|---|
Description |
Login Failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of login failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN Login Failure - IIP disabled and MIP disabled | |
Alert Message |
Number of recent login failures where both IIP and MIP were disabled on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN Login Failure - IIP Failed And MIP Disabled | |
---|---|---|
Description |
Login Failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of login failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN Login Failure - IIP failed and MIP disabled | |
Alert Message |
Number of recent login failures where IIP failed and MIP was disabled on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN Login Success - IIP Disabled And MIP Used | |
---|---|---|
Description |
Login Successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of login successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN Login Success - IIP disabled and MIP used | |
Alert Message |
Number of recent login successes where IIP was disabled and MIP was used on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN Login Success - IIP Failed And MIP Used | |
---|---|---|
Description |
Login Successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of login successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN Login Success - IIP failed and MIP used | |
Alert Message |
Number of recent login successes where IIP failed and MIP was used on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Access Gateway VPN Login Success - IIP Spillover And MIP Used | |
---|---|---|
Description |
Login Successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks number of login successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Access Gateway VPN Login Success - IIP spillover and MIP used | |
Alert Message |
Number of recent login successes where IIP spillover to MIP was used on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Appliance Monitoring Availability | |
---|---|---|
Description |
Checks appliance URL availability for monitoring. |
|
Knowledge Article |
SummaryThis monitor checks the appliance availability for monitoring. Appliance is available for monitoring if access to the appliance using NITRO API is success. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | NetScaler Appliance Availability | |
Alert Message |
NetScaler appliance "{0}" is inaccessible. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler CPU Usage | |
---|---|---|
Description |
Monitors NetScaler CPU utilization percentage. |
|
Knowledge Article |
SummaryThis monitor checks the percentage of CPU utilization. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler CPU Usage | |
Alert Message |
Device {0} has CPU utilization of {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
WarningThreshold | 92 |
CriticalThreshold | 98 |
NumberOfSamples | 2 |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Flash Disk Partition Percentage Usage | |
---|---|---|
Description |
Monitors percentage of /flash disk partition utilization on NetScaler. |
|
Knowledge Article |
SummaryThis monitor checks used space in /flash partition of the disk, as a percentage. This is a critical counter. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler Flash Disk Partition Percentage Usage | |
Alert Message |
Device {0} has /flash disk partition usage {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
WarningThreshold | 80 |
CriticalThreshold | 95 |
NumberOfSamples | 2 |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Global Memory Percentage Usage | |
---|---|---|
Description |
Monitors percentage of global memory utilization on NetScaler. |
|
Knowledge Article |
SummaryThis monitor checks the percentage of global memory utilization on NetScaler. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler Global Memory Percentage Usage | |
Alert Message |
Global memory usage on {0} device is {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
WarningThreshold | 80 |
CriticalThreshold | 95 |
NumberOfSamples | 2 |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler TCP SYN Packets Received Rate Usage | |
---|---|---|
Description |
Monitors the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state. |
|
Knowledge Article |
SummaryThis monitor checks the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state. A connection goes into the SYN_RCVD state after receiving a SYN packet. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler TCP SYN Packets Received Rate Usage | |
Alert Message |
Device {0} has TCP SYN packets received rate {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 1000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage | |
---|---|---|
Description |
Monitors percentage of TCP transmitted packets rate against retransmitted packets rate on NetScaler. |
|
Knowledge Article |
SummaryThis monitor checks the percentage of TCP packets loss rate. For a comparison, reference and current trends, refer to the TCP Transmission Packets Loss Rate Percentage and TCP Retransmitted Packets rules. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage | |
Alert Message |
Device {0} has TCP loss packets rate {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 5 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Citrix NetScaler UDP Packets Received Rate Usage | |
---|---|---|
Description |
Monitors the rate of UDP packets received. |
|
Knowledge Article |
SummaryThis monitor checks the rate of UDP packets received. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler UDP Packets Received Rate Usage | |
Alert Message |
NetScaler appliance {0} has UDP packets received rate {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Citrix NetScaler UDP Packets Transmitted Rate Usage | |
---|---|---|
Description |
Monitors the rate of UDP packets transmitted. |
|
Knowledge Article |
SummaryThis monitor checks the rate of UDP packets transmitted. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler UDP Packets Transmitted Rate Usage | |
Alert Message |
Device {0} has UDP packets transmitted rate {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Citrix NetScaler var Disk Partition Percentage Usage | |
---|---|---|
Description |
Monitors percentage of /var disk partition utilization on NetScaler. |
|
Knowledge Article |
SummaryThis monitor checks used space in /var partition of the disk, as a percentage. This is a critical counter. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler var Disk Partition Percentage Usage | |
Alert Message |
Device {0} has /var disk partition usage {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
WarningThreshold | 80 |
CriticalThreshold | 95 |
NumberOfSamples | 2 |
CacheExpirationFactor | 1 |
Display Name | Fan Speed (RPM) - 0 | |
---|---|---|
Description |
Speed of Fan 0 if associated pin is connected to health monitoring chip. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of Fan 0 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. Speed of Fan 0 if associated pin is connected to health monitoring chip. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - 0 | |
Alert Message |
Fan 0 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - 1 | |
---|---|---|
Description |
Speed of Fan 1 if associated pin is connected to health monitoring chip. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of Fan 1 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. Speed of Fan 1 if associated pin is connected to health monitoring chip. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - 1 | |
Alert Message |
Fan 1 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - 2 | |
---|---|---|
Description |
Speed of Fan 2 if associated pin is connected to health monitoring chip. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of Fan 2 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. Speed of Fan 2 if associated pin is connected to health monitoring chip. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - 2 | |
Alert Message |
Fan 2 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - 3 | |
---|---|---|
Description |
Speed of Fan 3 if associated pin is connected to health monitoring chip. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of Fan 3 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. Speed of Fan 3 if associated pin is connected to health monitoring chip. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - 3 | |
Alert Message |
Fan 3 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - CPU 0 | |
---|---|---|
Description |
CPU Fan 0 speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of CPU Fan 0 on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. Acceptable range is 3000 through 6000 RPM. CPU Fan 0 Speed is a critical counter. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - CPU 0 | |
Alert Message |
CPU 0 fan speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - CPU 1 | |
---|---|---|
Description |
CPU Fan 1 speed. Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU fan 0. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of CPU Fan 1 on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU Fan 0. CPU Fan 1 is a critical counter. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - CPU 1 | |
Alert Message |
CPU 1 fan speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - System | |
---|---|---|
Description |
System fan speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of System Fan on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. Acceptable range is 3000 through 6000 RPM. System Fan Speed is a critical counter. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - System | |
Alert Message |
System fan speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - System 1 | |
---|---|---|
Description |
System fan 1 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of System Fan 1 on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - System 1 | |
Alert Message |
System fan 1 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | Fan Speed (RPM) - System 2 | |
---|---|---|
Description |
System fan 2 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan. |
|
Knowledge Article |
SummaryThis monitor checks the speed (RPM) of System Fan 2 on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Fan Speed (RPM) - System 2 | |
Alert Message |
System fan 2 speed on {0} device is {1} RPM. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 3000 |
CriticalThreshold | 1000 |
CacheExpirationFactor | 0 |
Display Name | High Availability Node - Master State | |
---|---|---|
Description |
Checks current master state for NetScaler appliance node. |
|
Knowledge Article |
SummaryThis monitor checks current master state for the appliance node in context of high availability. Warning alert is generated whenever "Master State" parameter value is other than "Primary". This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | High Availability Node - Master State | |
Alert Message |
Node master state for NetScaler appliance "{0}" has changed to "{1}". |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | nCore Consistency | |
---|---|---|
Description |
Monitors nCore consistency for the appliance. |
|
Knowledge Article |
SummaryThis monitor checks nCore consistency for the appliance. The nCore NetScaler uses multiple CPU cores for packet handling, which greatly improves the performance of many NetScaler features. You can determine your NetScaler build type by looking at the build information on the banner of the NetScaler Graphical User Interface (GUI), or by issuing the "show version" command at the command line. The file extension indicates the build type. In the GUI, an nCore NetScaler has a ".nc" extension. On the command line, the tar file name for an nCore NetScaler contains "_nc". This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | nCore Consistency | |
Alert Message |
Core {0} on {1} appliance is not consistent. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Ok | Healthy |
Error | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Power Supply 1 Status | |
---|---|---|
Description |
Monitors Power Supply 1 status for the appliance. |
|
Knowledge Article |
SummaryThis monitor checks the Power Supply 1 status. On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC. NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit. Power Supply status can be one of the four:
The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances. NORMAL and NOT SUPPORTED are "Healthy" statuses. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Power Supply 1 Status | |
Alert Message |
Power Supply 1 on {0} appliance has status: {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Ok | Healthy |
Error | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 0 |
Display Name | Power Supply 2 Status | |
---|---|---|
Description |
Monitors Power Supply 2 status for the appliance. |
|
Knowledge Article |
SummaryThis monitor checks the Power Supply 2 status. On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC. NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit. Power Supply status can be one of the four:
The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances. NORMAL and NOT SUPPORTED are "Healthy" statuses. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Power Supply 2 Status | |
Alert Message |
Power Supply 2 on {0} appliance has status: {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Ok | Healthy |
Error | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 0 |
Display Name | Protocol IP - Address Lookups Failure Percentage | |
---|---|---|
Description |
Monitors percentage of IP address lookups that failed on NetScaler. |
|
Knowledge Article |
SummaryThis monitor checks the percentage of IPv4 Address Lookups Failure on NetScaler. When a packet is received on a non-established session, the NetScaler checks if the destination IP address is one of the NetScaler owned IP addresses. This monitor shows percentage of IP lookups that have failed because the destination IP address of the packet does not match any of the NetScaler owned IP addresses. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Address Lookups Failure Percentage | |
Alert Message |
IP Address Lookups Failure on {0} device is {1} percents. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
WarningThreshold | 10 |
CriticalThreshold | 20 |
NumberOfSamples | 2 |
CacheExpirationFactor | 1 |
Display Name | Protocol IP - Land-Attacks | |
---|---|---|
Description |
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same. |
|
Knowledge Article |
SummaryThis monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Land-Attacks | |
Alert Message |
Number of packets received where source and destination addresses are the same on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IP - Max Non-TCP Clients | |
---|---|---|
Description |
Attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded. |
|
Knowledge Article |
SummaryThis monitor checks number of attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Max Non-TCP Clients | |
Alert Message |
Number of attempts to open a new connection to a service for which the maximum limit has been exceeded on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IP - Packets With Bad MAC Sent | |
---|---|---|
Description |
IP packets during IntervalSeconds period of time transmitted with a bad MAC address. |
|
Knowledge Article |
SummaryThis monitor checks number of IP packets transmitted with a bad MAC address during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Packets With Bad MAC Sent | |
Alert Message |
Number of packets transmitted with a bad MAC address on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IP - Packets With MTU Length Greater Than 1514 Bytes | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes. |
|
Knowledge Article |
SummaryThis monitor checks number of IP packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Packets With Len > 1514 rcvd | |
Alert Message |
Number of packets received with a length greater than the normal maximum transmission unit of 1514 bytes on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IP - Unknown Services | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time on a port or service that is not configured. |
|
Knowledge Article |
SummaryThis monitor checks number of packets received during IntervalSeconds period of time on a port or service that is not configured. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IP - Unknown Services | |
Alert Message |
Number of Unknown Services packets received on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IPv6 - Error Header Packets | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time that contain an error in one or more components of the IPv6 header. |
|
Knowledge Article |
SummaryThis monitor checks number of error header packets received during IntervalSeconds period of time. The source and destination addresses are the same. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IPv6 - Error Header Packets | |
Alert Message |
Number of packets received that contain an error in one or more components of the IPv6 header on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IPv6 - Land-Attacks | |
---|---|---|
Description |
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same. |
|
Knowledge Article |
SummaryThis monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IPv6 - Land-Attacks | |
Alert Message |
Number of packets received where source and destination addresses are the same on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IPv6 - Reassembled Data Too Big | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes. |
|
Knowledge Article |
SummaryThis monitor checks number of packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IPv6 - Reassembled Data Too Big | |
Alert Message |
Number of packets received for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IPv6 - Unsupported Next Header | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time that contain an unsupported next header. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT. |
|
Knowledge Article |
SummaryThis monitor checks number of unsupported next header packets received during IntervalSeconds period of time. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IPv6 - Unsupported Next Header | |
Alert Message |
Number of packets received that contain an unsupported next header on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol IPv6 - Zero Fragment Length Received | |
---|---|---|
Description |
Packets received during IntervalSeconds period of time with a fragment length of 0 bytes. |
|
Knowledge Article |
SummaryThis monitor checks number of packets received during IntervalSeconds period of time with a fragment length of 0 bytes. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol IPv6 - Zero Fragment Length Received | |
Alert Message |
Number of packets received with a fragment length of 0 bytes on {0} device is {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | greater |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end DH authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end DH authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of back-end DH authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end DSS authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end DSS authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of back-end DSS authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end null authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of back-end null authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RSA authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RSA authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end null cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end SSLv3 client authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end TLSv1 client authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end SSLv3 handshakes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end TLSv1 handshakes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end MD5 hashes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End MD5 Hashes Total No Change Performance Monitor | |
Alert Message |
Total number of back-end MD5 hashes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end SHA hashes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End SHA Hashes Total No Change Performance Monitor | |
Alert Message |
Total number of back-end SHA hashes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges DH1024 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end DH 1024-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges DH2048 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end DH 2048-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end DH 512-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges DH512 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end DH 512-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges RSA1024 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end RSA 1024-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges RSA2048 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end RSA 2048-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate | |
---|---|---|
Description |
Monitors the number of back-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of back-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Back-End Key Exchanges RSA512 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has back-end RSA 512-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor | |
Alert Message |
Total number of back-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Back-End Sessions Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of back-end SSL sessions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of back-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Back-End Sessions Total No Change Performance Monitor | |
Alert Message |
Total number of back-end SSL sessions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of front-end Diffie-Helman authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end DSS authorization is used on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end DSS authorization is used on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of front-end DSS authorization is used on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end null authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of front-end null authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RSA authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RSA authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end null cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SSLv2 client authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SSLv2 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SSLv2 client authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SSLv3 client authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end TLSv1 client authentications on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SSLv2 handshakes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SSLv2 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SSLv2 handshakes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SSLv3 handshakes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end TLSv1 handshakes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end MD5 hashes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End MD5 Hashes Total No Change Performance Monitor | |
Alert Message |
Total number of front-end MD5 hashes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SHA hashes on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End SHA Hashes Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SHA hashes on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges DH1024 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end DH 1024-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges DH2048 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end DH 2048-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end DH 512-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges DH512 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end DH 512-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges RSA1024 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end RSA 1024-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges RSA2048 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end RSA 2048-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges RSA4096 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end RSA 4096-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate | |
---|---|---|
Description |
Monitors the number of front-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate) |
|
Knowledge Article |
SummaryThis monitor checks the rate of front-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered. Refer to "Protocol SSL - Front-End Key Exchanges RSA512 Rate" performance rule. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate | |
Alert Message |
NetScaler appliance {0} has front-end RSA 512-bit key exchanges rate = {1}. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Display Name | Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor | |
Alert Message |
Total number of front-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - Front-End Sessions Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of front-end SSL sessions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of front-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - Front-End Sessions Total No Change Performance Monitor | |
Alert Message |
Total number of front-end SSL sessions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Protocol SSL - SSL Card Status | |
---|---|---|
Description |
Monitors the status of the SSL card(s). |
|
Knowledge Article |
SummaryThis monitor checks status of the SSL card(s). It compares the number of SSL crypto cards present on the NetScaler appliance with the number of SSL cards that are UP. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Card Status | |
Alert Message |
One or more SSL cards present on {0} NetScaler appliance is not UP. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Ok | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Protocol SSL - SSL Engine Status | |
---|---|---|
Description |
Monitors the state of the SSL Engine. |
|
Knowledge Article |
SummaryThis monitor checks state of the SSL Engine (1=UP/0=DOWN). This state is decided based on SSL Feature/License status and minimum number of cards UP. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Engine Status | |
Alert Message |
SSL engine state is DOWN on {0} NetScaler appliance. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Ok | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Protocol SSL - SSL Transactions Total No Change Performance Monitor | |
---|---|---|
Description |
Monitors change of the total number of SSL transactions on the NetScaler appliance. |
|
Knowledge Article |
SummaryThis monitor detects change of the total number of SSL transactions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Protocol SSL - SSL Transactions Total No Change Performance Monitor | |
Alert Message |
Total number of SSL transactions on the NetScaler appliance {0} has not changed for a while. |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 3 |
Display Name | Temperature Monitor - CPU 0 (Celsius) | |
---|---|---|
Description |
CPU 0 temperature. 9800 and 9960 platforms display internal chip temperature. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of CPU 0 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. 9800 and 9960 platforms display internal chip temperature. CPU 0 Temperature is a critical counter. ConfigurationNetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - CPU 0 (Celsius) | |
Alert Message |
CPU 0 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - CPU 1 (Celsius) | |
---|---|---|
Description |
CPU 1 temperature. 9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of CPU 1 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. 9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. CPU 1 Temperature is a critical counter. ConfigurationNetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - CPU 1 (Celsius) | |
Alert Message |
CPU 1 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - Device 0 (Celsius) | |
---|---|---|
Description |
Temperature of a device connected to health monitoring chip through pin 0. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 0 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. ConfigurationAuxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - Device 0 (Celsius) | |
Alert Message |
Device 0 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - Device 1 (Celsius) | |
---|---|---|
Description |
Temperature of a device connected to health monitoring chip through pin 1. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 1 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. ConfigurationAuxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - Device 1 (Celsius) | |
Alert Message |
Device 1 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - Device 2 (Celsius) | |
---|---|---|
Description |
Temperature of a device connected to health monitoring chip through pin 2. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 2 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. ConfigurationAuxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - Device 2 (Celsius) | |
Alert Message |
Device 2 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - Device 3 (Celsius) | |
---|---|---|
Description |
Temperature of a device connected to health monitoring chip through pin 3. |
|
Knowledge Article |
SummaryThis monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 3 on a Citrix NetScaler Physical Appliance. This monitor is disabled by default. ConfigurationAuxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - Device 3 (Celsius) | |
Alert Message |
Device 3 temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | Temperature Monitor - Internal (Celsius) | |
---|---|---|
Description |
Internal temperature of health monitoring chip. This is a critical counter. |
|
Knowledge Article |
SummaryThis monitor checks the internal temperature of health monitoring chip (Celsius) on a Citrix NetScaler Physical Appliance. This monitor is enabled by default. Internal Temperature is a critical counter. ConfigurationInternal temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment. The following configuration parameters are customizable:
|
|
Alert Name | Temperature Monitor - Internal (Celsius) | |
Alert Message |
Internal temperature on {0} device is {1} degrees (Celsius). |
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 60 |
CriticalThreshold | 70 |
CacheExpirationFactor | 0 |
Display Name | AAA - Current ICAOnly Sessions Drop | |
---|---|---|
Description |
Monitors drop in number of current ICAOnly sessions during IntervalSeconds period of time. |
|
Knowledge Article |
SummaryThis monitor checks for drop in the number of current ICAOnly sessions during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Current ICAOnly sessions drop | |
Alert Message |
Number of ICA only sessions on {0} appliance is decreased by more than predefined threshold. Delta value: {1} Current number of ICA only sessions: {2} |
|
Target | Citrix NetScaler Appliance (v10.x and later) | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100 |
Display Name | AAA - Current ICAOnly Sessions Minimum | |
---|---|---|
Description |
Monitors if number of current ICAOnly sessions is below minimum specified by Threshold parameter. |
|
Knowledge Article |
SummaryThis monitor checks if number of current ICAOnly sessions is below minimum specified by Threshold parameter. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | AAA - Current ICAOnly sessions minimum | |
Alert Message |
Number of current ICAOnly sessions on {0} appliance is below minimum specified by Threshold parameter. Current ICAOnly sessions: {1} |
|
Target | Citrix NetScaler Appliance (v10.x and later) | |
Enabled by default | No |
Monitor State | Health State |
---|---|
Ok | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 5 |
Display Name | Channel Availability State Monitor | |
---|---|---|
Description |
Monitors current state of Citrix NetScaler channel. |
|
Knowledge Article |
SummaryThis monitor checks the current state of the specified channel. The interface state set to UP only if the link state is UP and administrative state is ENABLED. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
ExternalFor more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state. For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site. For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.html site. |
|
Alert Name | Channel Availability State Monitor | |
Alert Message |
Channel {0} on {1} device has state: {2}. |
|
Target | Citrix NetScaler Appliance Channel | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Healthy | Healthy |
Unhealthy | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
IgnoreStates | DISABLED |
HealthyCondition | UP |
Display Name | IPv4 Address Conflict | |
---|---|---|
Description |
Monitors IPv4 Conflicts. |
|
Knowledge Article |
SummaryThis monitor checks NetScaler system log for IP conflicts. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | IPv4 Address Conflict | |
Alert Message |
The IP address conflict occurred. Conflicted IP: {0} Detected on NetScaler with IP address: {1} Detailed Info: {2} |
|
Target | Citrix NetScaler Appliance IPv4 | |
Enabled by default | No |
Monitor State | Health State |
---|---|
No IP Conflict | Healthy |
IP Conflict | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 3600 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 0.0 |
Display Name | IPv6 Address Conflict | |
---|---|---|
Description |
Monitors IPv6 Conflicts. |
|
Knowledge Article |
SummaryThis monitor checks NetScaler system log for IP conflicts. This monitor is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | IPv6 Address Conflict | |
Alert Message |
The IP address conflict occurred. Conflicted IP: {0} Detected on NetScaler with IP address: {1} Detailed Info: {2} |
|
Target | Citrix NetScaler Appliance IPv6 | |
Enabled by default | No |
Monitor State | Health State |
---|---|
No IP Conflict | Healthy |
IP Conflict | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 3600 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 0.0 |
Display Name | Authentication Server LDAP - Authentication Failures | |
---|---|---|
Description |
Number of LDAP authentication failures in a time period. |
|
Knowledge Article |
SummaryThis monitor detects the change (increase) in the number of authentication failures on the LDAP authentication server that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Authentication Server LDAP - Authentication failures | |
Alert Message |
The number of authentication failures on LDAP authentication server {0} has changed by {1} on NetScaler appliance {2}. |
|
Target | Citrix NetScaler Appliance LDAP Authentication Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10 |
Display Name | Citrix NetScaler Feature Memory Percentage Usage | |
---|---|---|
Description |
Monitors percentage of NetScaler memory used by the feature. |
|
Knowledge Article |
SummaryThis monitor checks percentage of NetScaler memory used by the feature. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Citrix NetScaler Feature Memory Percentage Usage | |
Alert Message |
{0} feature memory usage on {1} device is {2} percents. |
|
Target | Citrix NetScaler Appliance Memory Pool | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
NumberOfSamples | 2 |
WarningThreshold | 80 |
CriticalThreshold | 95 |
CacheExpirationFactor | 1 |
Display Name | Interface Availability State Monitor | |
---|---|---|
Description |
Monitors current state of Citrix NetScaler Interface. |
|
Knowledge Article |
SummaryThis monitor checks the current state of the specified interface. The interface state set to UP only if the link state is UP and administrative state is ENABLED. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
ExternalFor more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state. For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site. For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.html site. |
|
Alert Name | Interface Availability State Monitor | |
Alert Message |
Interface {0} on {1} device has state: {2}. |
|
Target | Citrix NetScaler Appliance Network Interface | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Healthy | Healthy |
Unhealthy | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
IgnoreStates | DISABLED |
HealthyCondition | UP |
Display Name | Authentication Server Radius - Authentication Failures | |
---|---|---|
Description |
Number of Radius authentication failures in a time period. |
|
Knowledge Article |
SummaryThis monitor detects the change (increase) in the number of authentication failures on the Radius authentication server that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Authentication Server Radius - Authentication failures | |
Alert Message |
The number of authentication failures on Radius authentication server {0} has changed by {1} on NetScaler appliance {2}. |
|
Target | Citrix NetScaler Appliance Radius Authentication Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10 |
Display Name | SSL Certificate Expiration Configuration State Monitor | |
---|---|---|
Description |
Monitors state of Citrix NetScaler SSL certificate. |
|
Knowledge Article |
SummaryThis monitor checks the number of days remaining for the certificate to expire. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Certificate Expiration Configuration State Monitor | |
Alert Message |
SSL Certificate {0} on {1} NetScaler device expires in {2} days. |
|
Target | Citrix NetScaler Appliance SSL Certificate | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 20 |
CriticalThreshold | 0 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
Display Name | Authentication Server TACACS - Authentication Failures | |
---|---|---|
Description |
Number of TACACS authentication failures in a time period. |
|
Knowledge Article |
SummaryThis monitor detects the change (increase) in the number of authentication failures on the TACACS authentication server that occurred during IntervalSeconds period of time. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Authentication Server TACACS - Authentication failures | |
Alert Message |
The number of authentication failures on TACACS authentication server {0} has changed by {1} on NetScaler appliance {2}. |
|
Target | Citrix NetScaler Appliance TACACS Authentication Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10 |
Display Name | Load Balancing Service - State Monitor | |
---|---|---|
Description |
Monitors state of a Citrix NetScaler load balancing service. |
|
Knowledge Article |
SummaryThis monitor checks the current state of Citrix NetScaler Load Balancing Service. This monitor is enabled by default. Services on a NetScaler appliance can have any of the following statuses:
ConfigurationThe following configuration parameters are customizable:
Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters. If retrieved service state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state. |
|
Alert Name | Load Balancing Service - State Monitor | |
Alert Message |
Load balancing service {0} on {1} device has state: {2}. |
|
Target | LB Service | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
SuccessValue | UP|OUT OF SERVICE |
CriticalValue | DOWN |
Display Name | Load Balancing Service Group - Effective State Monitor | |
---|---|---|
Description |
Monitors effective state of a Citrix NetScaler load balancing service group. |
|
Knowledge Article |
SummaryThis monitor checks the current state of Citrix NetScaler Load Balancing ServiceGroup depending on state of the group members. This monitor is enabled by default. ServiceGroup on a NetScaler appliance can have any of the following statuses:
ConfigurationThe following configuration parameters are customizable:
Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters. If retrieved servicegroup state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state. |
|
Alert Name | Load Balancing Service Group Effective State Monitor | |
Alert Message |
Load Balancing Service Group {0} on {1} device has effective state: {2}. {3} {4} |
|
Target | LB Service Groups | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
SuccessValue | UP|OUT OF SERVICE |
CriticalValue | DOWN |
Display Name | Load Balancing Virtual Server - Health Status Percentage | |
---|---|---|
Description |
Health status percentage in relation to total number of active services bound to the virtual server. |
|
Knowledge Article |
SummaryThis monitor checks health status percentage in relation to total number of active services bound to the virtual server. This monitor is enabled by default. Note that health status percentage is 100% in case when virtual server is disabled (curstate = "OUT OF SERVICE"). ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Load Balancing Virtual Server - Health Status Percentage | |
Alert Message |
Health status percentage for virtual server {0} on {1} NetScaler device is {2}%. |
|
Target | LB Virtual Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
WarningThreshold | 50 |
CriticalThreshold | 0 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Load Balancing Virtual Server - State Monitor | |
---|---|---|
Description |
Monitors state of a Citrix NetScaler load balancing virtual server. |
|
Knowledge Article |
SummaryThis monitor checks the current state of Citrix NetScaler Load Balancing Virtual Server. This monitor is enabled by default. Virtual servers on a NetScaler appliance can have any of the following statuses:
The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests. The following are the probable reasons for the status of a virtual server being marked as DOWN:
ConfigurationThe following configuration parameters are customizable:
Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters. If retrieved virtual server state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state. |
|
Alert Name | Load Balancing Virtual Server - State Monitor | |
Alert Message |
Load balancing virtual server {0} on {1} device has state: {2}. |
|
Target | LB Virtual Server | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Critical | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1.0 |
SuccessValue | UP|OUT OF SERVICE |
CriticalValue | DOWN |
Display Name | SSL Action Hits Not Changed | |
---|---|---|
Description |
Monitors that specific action hits not changed during predefined interval. |
|
Knowledge Article |
SummaryThis monitor check hits count for the action. If hits count is not changed for specified time interval it generates an alert. If some action are rarely executed override the update interval or if disable it. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Action Hits Not Changed | |
Alert Message |
SSL Action hits value for {0} action on {1} NetScaler appliance for long time is not changed. This usually indicate that there are no traffic which will trigger the action. |
|
Target | NetScaler Appliance (v10.x and later) SSL Action | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 3600 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 1 |
Display Name | SSL Action Undef Hits | |
---|---|---|
Description |
Monitors that specific action increasing undef hits. |
|
Knowledge Article |
SummaryThis monitor detects the change (increase) in the number of undef hits on the action that occurred during IntervalSeconds period of time. If undef hits for specific period are greater than threshold value an alert is generated. When the rule evaluation turns out to be undefined undef hits counter is incremented. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Action Undef Hits | |
Alert Message |
SSL Action undef hits value for {0} action on {1} appliance is increased more than specified by threshold value. Increase value is: {2} |
|
Target | NetScaler Appliance (v10.x and later) SSL Action | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10 |
Display Name | SSL Policy Undef Hits | |
---|---|---|
Description |
Monitors that specific policy increasing undef hits. |
|
Knowledge Article |
SummaryThis monitor detects the change (increase) in the number of undef hits on the policy that occurred during IntervalSeconds period of time. If undef hits for specific period are greater than threshold value an alert is generated. Action to be used by the policy when the rule evaluation turns out to be undefined and in this case undef hits counter is incremented. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Policy Undef Hits | |
Alert Message |
SSL Policy undef hits value for {0} policy on {1} appliance is increased more than specified by threshold value. Increase value is: {2} |
|
Target | NetScaler Appliance (v10.x and later) SSL Policy | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 10 |
Display Name | Appliance Components Configuration Monitoring Availability | |
---|---|---|
Description |
Checks appliance URL availability for monitoring for specific component. |
|
Knowledge Article |
SummaryThis monitor checks the appliance availability for monitoring. Appliance is available for monitoring if access to the appliance using NITRO API is success. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | Appliance Configuration Availability | |
Alert Message |
Configuration for appliance {0} cannot be obtained. |
|
Target | NetScaler Base Class For Setting Component | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Unsuccessful | Critical |
Parameter | Default Value |
---|---|
IntervalSeconds | 300 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | SSL Policy Hits Not Changed | |
---|---|---|
Description |
Monitors that specific policy hits not changed during predefined interval. |
|
Knowledge Article |
SummaryThis monitor check hits count for the policy. If hits count is not changed for specified time interval it generates an alert. If some policies are rarely executed override the update interval or if disable it. This monitor is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Alert Name | SSL Policy Hits Not Changed | |
Alert Message |
SSL Policy hits value for {0} policy on {1} NetScaler appliance for long time is not changed. This usually indicate that there are no traffic which will trigger the policy. |
|
Target | NetScaler SSL Policy | |
Enabled by default | Yes |
Monitor State | Health State |
---|---|
Success | Healthy |
Warning | Warning |
Parameter | Default Value |
---|---|
IntervalSeconds | 3600 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
NumberOfSamples | 1 |
Display Name | Access Gateway Virtual Server - Current AAA Users | |
---|---|---|
Description |
Number of Current AAA users on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule collects number of current AAA users on access gateway virtual server. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Current AAA Users |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Current Users Percentage | |
---|---|---|
Description |
Percentage of Current Users in relation to Maximum Users that can be logged in. |
|
Knowledge Article |
SummaryThis rule collects percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server. This rule is enabled by default. Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values. The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Current Users Percentage |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Request Bytes (Rate) | |
---|---|---|
Description |
Request bytes rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule collects request bytes rate information on access gateway virtual server. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Request Bytes (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Request Bytes Threshold (Rate) | |
---|---|---|
Description |
Request bytes rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule monitors the total number of request bytes received on the service or virtual server. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Access Gateway Virtual Server - Request Bytes Threshold (Rate) | |
Alert Message |
Access gateway virtual server {0} on NetScaler device {1} has request bytes rate = {2}. |
|
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Request Rate Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Priority | 0 |
Severity | 0 |
Display Name | Access Gateway Virtual Server - Requests (Rate) | |
---|---|---|
Description |
Requests rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule collects requests rate information on access gateway virtual server. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Requests (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Requests Threshold (Rate) | |
---|---|---|
Description |
Request rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule monitors the total number of requests received on the service or virtual server. (Rate) (This applies to HTTP/SSL services and servers.) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Access Gateway Virtual Server - Requests Threshold (Rate) | |
Alert Message |
Access gateway virtual server {0} on NetScaler device {1} has requests rate = {2}. |
|
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Requests Rate Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 1000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Priority | 0 |
Severity | 0 |
Display Name | Access Gateway Virtual Server - Response Bytes (Rate) | |
---|---|---|
Description |
Response bytes rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule collects response bytes rate information on access gateway virtual server. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Response Bytes (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Response Bytes Threshold (Rate) | |
---|---|---|
Description |
Response bytes rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule monitors the total number of response bytes received on the service or virtual server. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Access Gateway Virtual Server - Response Bytes Threshold (Rate) | |
Alert Message |
Access gateway virtual server {0} on NetScaler device {1} has response bytes rate = {2}. |
|
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Response Bytes Rate Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 100000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Priority | 0 |
Severity | 0 |
Display Name | Access Gateway Virtual Server - Responses (Rate) | |
---|---|---|
Description |
Responses rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule collects responses rate information on access gateway virtual server. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Responses (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Access Gateway Virtual Server - Responses Threshold (Rate) | |
---|---|---|
Description |
Responses rate on access gateway virtual server. |
|
Knowledge Article |
SummaryThis rule monitors the total number of responses received on the service or virtual server. (Rate) (This applies to HTTP/SSL services and servers.) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Access Gateway Virtual Server | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Access Gateway Virtual Server - Responses Threshold (Rate) | |
Alert Message |
Access gateway virtual server {0} on NetScaler device {1} has responses bytes rate = {2}. |
|
Object Name | NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$ | |
Counter Name | Access Gateway Virtual Server - Responses Rate Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Threshold | 1000 |
Direction | GreaterEqual |
NumberOfSamples | 2 |
Priority | 0 |
Severity | 0 |
Display Name | AAA - AAA Sessions | |
---|---|---|
Description |
Count of all AAA sessions. |
|
Knowledge Article |
SummaryThis rule collects count of all AAA sessions. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - AAA sessions |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - AAA Sessions (Rate) | |
---|---|---|
Description |
Count of all AAA sessions. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of all AAA sessions. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - AAA sessions (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Failures | |
---|---|---|
Description |
Count of authentication failures. |
|
Knowledge Article |
SummaryThis rule collects count of authentication failures. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Authentication failures |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Failures (Rate) | |
---|---|---|
Description |
Count of authentication failures. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of authentication failures. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Authentication failures (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Success | |
---|---|---|
Description |
Count of authentication successes. |
|
Knowledge Article |
SummaryThis rule collects count of authentication successes. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Authentication successes |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Success (Rate) | |
---|---|---|
Description |
Count of authentication successes. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of authentication successes. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Authentication successes (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Authentication Success Ratio | |
---|---|---|
Description |
Percentage of authentication successes in relation to total number of authentication attempts. |
|
Knowledge Article |
SummaryThis rule collects percentage of authentication successes in relation to total number of authentication attempts. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Authentication Success Ratio |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Current AAA Sessions | |
---|---|---|
Description |
Count of current AAA sessions. |
|
Knowledge Article |
SummaryThis rule collects count of current AAA sessions. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Current AAA sessions |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Current AAA Sessions (Rate) | |
---|---|---|
Description |
Count of current AAA sessions. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of current AAA sessions. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Current AAA sessions (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Failure | |
---|---|---|
Description |
Count of HTTP connections that failed authorization. |
|
Knowledge Article |
SummaryThis rule collects count of HTTP connections that failed authorization. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - HTTP authorization failures |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Failure (Rate) | |
---|---|---|
Description |
Count of HTTP connections that failed authorization. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of HTTP connections that failed authorization. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - HTTP authorization failures (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Success | |
---|---|---|
Description |
Count of HTTP connections that succeeded authorization. |
|
Knowledge Article |
SummaryThis rule collects count of HTTP connections that succeeded authorization. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - HTTP authorization successes |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Success (Rate) | |
---|---|---|
Description |
Count of HTTP connections that succeeded authorization. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of HTTP connections that succeeded authorization. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - HTTP authorization successes (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - HTTP Authorization Success Ratio | |
---|---|---|
Description |
Percentage of HTTP connections that succeeded authorization in relation to total number of HTTP connections authorization attempts. |
|
Knowledge Article |
SummaryThis rule collects percentage of HTTP connections that succeeded authorization in relation to total number of HTTP connections authorization attempts. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - HTTP Authorization Success Ratio |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Failures | |
---|---|---|
Description |
Count of non HTTP connections that failed authorization. |
|
Knowledge Article |
SummaryThis rule collects count of non HTTP connections that failed authorization. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Non HTTP authorization failures |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Failures (Rate) | |
---|---|---|
Description |
Count of non HTTP connections that failed authorization. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of non HTTP connections that failed authorization. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Non HTTP authorization failures (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Success | |
---|---|---|
Description |
Count of non HTTP connections that succeeded authorization. |
|
Knowledge Article |
SummaryThis rule collects count of non HTTP connections that succeeded authorization. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Non HTTP authorization successes |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Success (Rate) | |
---|---|---|
Description |
Count of non HTTP connections that succeeded authorization. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of non HTTP connections that succeeded authorization. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Non HTTP authorization successes (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Non HTTP Authorization Success Ratio | |
---|---|---|
Description |
Percentage of non HTTP connections that succeeded authorization in relation to total number of non HTTP connections authorization attempts. |
|
Knowledge Article |
SummaryThis rule collects percentage of non HTTP connections that succeeded authorization in relation to total number of non HTTP connections authorization attempts. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Non HTTP Authorization Success Ratio |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Timed Out AAA Sessions | |
---|---|---|
Description |
Count of AAA sessions that have timed out. |
|
Knowledge Article |
SummaryThis rule collects count of AAA sessions that have timed out. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Timed out AAA sessions |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | AAA - Timed Out AAA Sessions (Rate) | |
---|---|---|
Description |
Count of AAA sessions that have timed out. (Rate) |
|
Knowledge Article |
SummaryThis rule collects count of AAA sessions that have timed out. (Rate) This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler AAA - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | AAA - Timed out AAA sessions (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Aborts | |
---|---|---|
Description |
Incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Total). This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Aborts |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Aborts Rate | |
---|---|---|
Description |
Incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about incomplete HTTP/HTTPS requests aborted by the client before the Application Firewall could finish processing them. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Aborts Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Redirects | |
---|---|---|
Description |
HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Redirects |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Redirects Rate | |
---|---|---|
Description |
HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS requests redirected by the Application Firewall to a different Web page or web server. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Redirects Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Requests | |
---|---|---|
Description |
HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Requests |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Requests Rate | |
---|---|---|
Description |
HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS requests sent to your protected web servers via the Application Firewall. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Requests Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Responses | |
---|---|---|
Description |
HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Responses |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Application Firewall - Responses Rate | |
---|---|---|
Description |
HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about HTTP/HTTPS responses sent by your protected web servers via the Application Firewall. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Application Firewall - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Application Firewall - Responses Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - 304 Hits Rate | |
---|---|---|
Description |
Object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - 304 Hits Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - 64 Maximum Memory (KB) | |
---|---|---|
Description |
Largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run. |
|
Knowledge Article |
SummaryThis rule collects statistics about largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - 64 Maximum memory (KB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Hits Rate | |
---|---|---|
Description |
Responses served from the integrated cache. These responses match a policy with a CACHE action. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about responses served from the integrated cache. These responses match a policy with a CACHE action. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Hits Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Maximum Memory (KB) | |
---|---|---|
Description |
Largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run. |
|
Knowledge Article |
SummaryThis rule collects statistics about largest amount of memory the NetScaler can dedicate to caching, up to 50% of available memory. A 0 value disables caching, but the caching module continues to run. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Maximum memory (KB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Maximum Memory Active Value (KB) | |
---|---|---|
Description |
Currently active value of maximum memory. |
|
Knowledge Article |
SummaryThis rule collects statistics about currently active value of maximum memory. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Maximum memory active value (KB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Misses Rate | |
---|---|---|
Description |
Intercepted HTTP requests requiring fetches from origin server. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about intercepted HTTP requests requiring fetches from origin server. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Misses Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Non-304 Hits Rate | |
---|---|---|
Description |
Total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Non-304 Hits Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Origin Bandwidth Saved (%) | |
---|---|---|
Description |
Percentage of origin bandwidth saved, expressed as number of bytes served from the integrated cache divided by all bytes served. The assumption is that all compression is done in the NetScaler. |
|
Knowledge Article |
SummaryThis rule collects statistics about percentage of origin bandwidth saved, expressed as number of bytes served from the integrated cache divided by all bytes served. The assumption is that all compression is done in the NetScaler. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Origin bandwidth saved (%) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Requests Rate | |
---|---|---|
Description |
Total cache hits plus total cache misses. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about total cache hits plus total cache misses. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Requests Rate |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Total 304 Hits | |
---|---|---|
Description |
Object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about object not modified responses served from the cache. (Status code 304 served instead of the full response.) (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Total 304 Hits |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Total Hits | |
---|---|---|
Description |
Responses served from the integrated cache. These responses match a policy with a CACHE action. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about responses served from the integrated cache. These responses match a policy with a CACHE action. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Total Hits |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Total Misses | |
---|---|---|
Description |
Intercepted HTTP requests requiring fetches from origin server. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about intercepted HTTP requests requiring fetches from origin server. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Total Misses |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Total Non-304 Hits | |
---|---|---|
Description |
Total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. |
|
Knowledge Article |
SummaryThis rule collects statistics about total number of full (non-304) responses served from the cache. A 304 status code indicates that a response has not been modified since the last time it was served. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Total Non-304 Hits |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Total Requests | |
---|---|---|
Description |
Total cache hits plus total cache misses. |
|
Knowledge Article |
SummaryThis rule collects statistics about total cache hits plus total cache misses. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Total Requests |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Cache - Utilized Memory (KB) | |
---|---|---|
Description |
Amount of memory the integrated cache is currently using. |
|
Knowledge Article |
SummaryThis rule collects statistics about amount of memory the integrated cache is currently using. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Integrated Cache - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Cache - Utilized memory (KB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Device CPU Usage (in %) | |
---|---|---|
Description |
Collects CPU usage (in percents) of a Citrix NetScaler Device. |
|
Knowledge Article |
SummaryThis rule collects statistics of NetScaler CPU utilization in percents. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Device | |
Counter Name | CPU Usage in Percent |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Device Current Memory Allocated (in MB) | |
---|---|---|
Description |
Collects statistics of currently allocated memory on NetScaler device, in megabytes. |
|
Knowledge Article |
SummaryThis rule collects statistics of NetScaler currently allocated memory, in megabytes. This rule is enabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | Yes | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Current Memory Allocated (in MB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Device Global Memory Usage (in %) | |
---|---|---|
Description |
Collects statistics of global memory utilization percentage on NetScaler device. |
|
Knowledge Article |
SummaryThis rule collects statistics of NetScaler global memory utilization in percent. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Global Memory Utilization (in %) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Citrix NetScaler Device Global Memory Usage (in MB) | |
---|---|---|
Description |
Collects statistics of global memory utilization in MB on NetScaler device. |
|
Knowledge Article |
SummaryThis rule collects statistics of NetScaler global memory utilization, in megabytes. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Device - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Global Memory Utilization (in MB) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - Compressed Bytes Transmitted (Rate) | |
---|---|---|
Description |
Number of bytes the NetScaler sends to the client after compressing the response from the server. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about number of bytes the NetScaler sends to the client after compressing the response from the server. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - Compressed bytes transmitted (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - Compressed Bytes Transmitted (Total) | |
---|---|---|
Description |
Number of bytes the NetScaler sends to the client after compressing the response from the server. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about number of bytes the NetScaler sends to the client after compressing the response from the server. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - Compressed bytes transmitted (Total) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - Compressible Bytes Received (Rate) | |
---|---|---|
Description |
Number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Rate) |
|
Knowledge Article |
SummaryThis rule collects statistics about number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Rate) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - Compressible bytes received (Rate) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - Compressible Bytes Received (Total) | |
---|---|---|
Description |
Number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Total) |
|
Knowledge Article |
SummaryThis rule collects statistics about number of bytes that can be compressed, which the NetScaler receives from the server. This gives the content length of the response that the NetScaler receives from server. (Total) This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - Compressible bytes received (Total) |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - HTTP Compression Ratio | |
---|---|---|
Description |
Ratio of the compressible data received from the server to the compressed data sent to the client. |
|
Knowledge Article |
SummaryThis rule collects statistics about ratio of the compressible data received from the server to the compressed data sent to the client. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - HTTP compression ratio |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Compression - Total HTTP Compression Ratio | |
---|---|---|
Description |
Ratio of total HTTP data received to total HTTP data transmitted. |
|
Knowledge Article |
SummaryThis rule collects statistics about ratio of total HTTP data received to total HTTP data transmitted. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | False | |
Object Name | NetScaler Compression - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance"]/IPAddress$ | |
Counter Name | Compression - Total HTTP compression ratio |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Display Name | Config Param Change Feature AppFlow State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, AppFlow feature state. |
|
Knowledge Article |
SummaryThis rule monitors AppFlow feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature AppFlow State | |
Alert Message |
Citrix NetScaler Feature configuration settings, AppFlow feature state (appflow) has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - AppFlow State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Application Firewall State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, application firewall feature state. |
|
Knowledge Article |
SummaryThis rule monitors Application Firewall feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Application Firewall State | |
Alert Message |
Citrix NetScaler Feature configuration settings, application firewall feature state (appfw) has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Application Firewall State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Authentication Authorization Auditing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, authentication, authorization and auditing feature state. |
|
Knowledge Article |
SummaryThis rule monitors authentication, authorization and auditing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Authentication Authorization Auditing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, authentication, authorization and auditing feature state (aaa) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - AAA State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature BGP Routing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, BGP routing feature state. |
|
Knowledge Article |
SummaryThis rule monitors BGP Routing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature BGP Routing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, BGP routing feature (bgp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - BGP Routing State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Cache Redirect State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, cache redirect feature state. |
|
Knowledge Article |
SummaryThis rule monitors Cache Redirect feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Cache Redirect State | |
Alert Message |
Citrix NetScaler Feature configuration settings, cache redirect feature state (cr) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Cache Redirect State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Cloud Bridge State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, cloud bridge feature state. |
|
Knowledge Article |
SummaryThis rule monitors cloud bridge feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Cloud Bridge State | |
Alert Message |
Citrix NetScaler Feature configuration settings, cloud bridge feature state (cloudbridge) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Cloud Bridge State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Compression State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, compression feature state. |
|
Knowledge Article |
SummaryThis rule monitors Compression feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Compression State | |
Alert Message |
Citrix NetScaler Feature configuration settings, compression feature state (cmp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Compression State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Content Filter State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, content filter feature state. |
|
Knowledge Article |
SummaryThis rule monitors Content Filter feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Content Filter State | |
Alert Message |
Citrix NetScaler Feature configuration settings, content filter feature state (cf) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Content Filter State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Content Switching State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, content switching feature state. |
|
Knowledge Article |
SummaryThis rule monitors Content Switching feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Content Switching State | |
Alert Message |
Citrix NetScaler Feature configuration settings, content switching feature state (cs) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Content Switching State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature DOS Protection State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, DOS protection feature state. |
|
Knowledge Article |
SummaryThis rule monitors DOS Protection feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature DOS Protection State | |
Alert Message |
Citrix NetScaler Feature configuration settings, DOS protection feature state (hdosp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - DOS Protection State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature GSLB State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, global server load balancing feature state. |
|
Knowledge Article |
SummaryThis rule monitors Global Server Load Balancing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature GSLB State | |
Alert Message |
Citrix NetScaler Feature configuration settings, GSLB feature state (gslb) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - GSLB State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature HTML Injection State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, HTML injection feature state. |
|
Knowledge Article |
SummaryThis rule monitors HTML Injection feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature HTML Injection State | |
Alert Message |
Citrix NetScaler Feature configuration settings, HTML injection feature state (htmlinjection) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - HTML Injection State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Integrated Caching State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, integrated caching feature state. |
|
Knowledge Article |
SummaryThis rule monitors Integrated Caching feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Integrated Caching State | |
Alert Message |
Citrix NetScaler Feature configuration settings, integrated caching feature state (ic) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Integrated Caching State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature IPv6 Translation State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, IPv6 protocol translation feature state. |
|
Knowledge Article |
SummaryThis rule monitors IPv6 protocol translation feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature IPv6 Translation State | |
Alert Message |
Citrix NetScaler Feature configuration settings, IPv6 translation feature state (ipv6pt) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - IPv6 Translation State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Load Balancing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, load balancing feature state. |
|
Knowledge Article |
SummaryThis rule monitors Load Balancing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Load Balancing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, load balancing feature state (lb) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Load Balancing State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature OSPF Routing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, OSPF routing feature state. |
|
Knowledge Article |
SummaryThis rule monitors OSPF Routing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature OSPF Routing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, OSPF routing feature state (ospf) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - OSPF Routing State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Priority Queuing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, priority queuing feature state. |
|
Knowledge Article |
SummaryThis rule monitors Priority Queuing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Priority Queuing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, priority queuing feature state (pq) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Priority Queuing State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Push State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, NetScaler push feature state. |
|
Knowledge Article |
SummaryThis rule monitors NetScaler Push feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Push State | |
Alert Message |
Citrix NetScaler Feature configuration settings, NetScaler push feature state (push) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - NetScaler Push State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Responder State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, responder feature state. |
|
Knowledge Article |
SummaryThis rule monitors Responder feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Responder State | |
Alert Message |
Citrix NetScaler Feature configuration settings, responder feature state (responder) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Responder State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Rewrite State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, rewrite feature state. |
|
Knowledge Article |
SummaryThis rule monitors Rewrite feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Rewrite State | |
Alert Message |
Citrix NetScaler Feature configuration settings, rewrite feature state (rewrite) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Rewrite State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature RIP Routing State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, RIP routing feature state. |
|
Knowledge Article |
SummaryThis rule monitors RIP Routing feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature RIP Routing State | |
Alert Message |
Citrix NetScaler Feature configuration settings, RIP routing feature state (rip) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - RIP Routing State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature SSL State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, SSL feature state. |
|
Knowledge Article |
SummaryThis rule monitors Secure Sockets Layer feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature SSL State | |
Alert Message |
Citrix NetScaler Feature configuration settings, SSL feature state (ssl) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - SSL State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature SSL VPN State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, SSL VPN feature state. |
|
Knowledge Article |
SummaryThis rule monitors SSL VPN feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature SSL VPN State | |
Alert Message |
Citrix NetScaler Feature configuration settings, SSL VPN feature state (sslvpn) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - SSL VPN State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Sure Connect State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, sure connect feature state. |
|
Knowledge Article |
SummaryThis rule monitors Sure Connect feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Sure Connect State | |
Alert Message |
Citrix NetScaler Feature configuration settings, sure connect feature state (sc) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Sure Connect State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Surge Protection State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, surge protection feature state. |
|
Knowledge Article |
SummaryThis rule monitors Surge Protection feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Surge Protection State | |
Alert Message |
Citrix NetScaler Feature configuration settings, surge protection feature state (sp) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Surge Protection State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Feature Web Logging State | |
---|---|---|
Description |
Monitors change of NetScaler Feature settings, web logging feature state. |
|
Knowledge Article |
SummaryThis rule monitors Web Logging feature enable/disable state. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Feature Web Logging State | |
Alert Message |
Citrix NetScaler Feature configuration settings, web logging feature state (wl) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Feature | |
Counter Name | Feature Param - Web Logging State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Base Threshold | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the base threshold. |
|
Knowledge Article |
SummaryThis rule monitors change of the base threshold parameter in Citrix NetScaler configuration. This is the maximum number of server connections that can be opened before surge protection is activated. Default value: 200 Minimum value = 0 Maximum value = 32767. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Base Threshold | |
Alert Message |
Citrix NetScaler Global configuration settings, base threshold (basethreshold) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Base Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Exclusive Quota Max Client | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the percentage of maxClient to be given to PEs. |
|
Knowledge Article |
SummaryThis rule monitors change of the percentage of maxClient to be given to PEs. Default value: 80 Minimum value = 0 Maximum value = 100. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Exclusive Quota Max Client | |
Alert Message |
Citrix NetScaler Global configuration settings, percentage of maxClient given to PEs (exclusivequotamaxclient) has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Exclusive Quota Max Client |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Exclusive Quota Spillover | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the percentage of max limit to be given to PEs. |
|
Knowledge Article |
SummaryThis rule monitors change of the percentage of max limit to be given to PEs. Default value: 80 Minimum value = 0 Maximum value = 100. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Exclusive Quota Spillover | |
Alert Message |
Citrix NetScaler Global configuration settings, percentage of max limit to PEs (exclusivequotaspillover) has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Exclusive Quota Spillover |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Grant Quota Max Client | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the percentage of shared quota to be granted at a time for maxClient. |
|
Knowledge Article |
SummaryThis rule monitors change of the percentage of shared quota to be granted at a time for maxClient. Default value: 10 Minimum value = 0 Maximum value = 100. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Grant Quota Max Client | |
Alert Message |
Citrix NetScaler Global configuration settings, percentage of shared quota for maxClient (grantquotamaxclient) has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Grant Quota Max Client |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Grant Quota Spillover | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the percentage of shared quota to be granted at a time for spillover. |
|
Knowledge Article |
SummaryThis rule monitors change of the percentage of shared quota to be granted at a time for spillover. Default value: 10 Minimum value = 0 Maximum value = 100. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Grant Quota Spillover | |
Alert Message |
Citrix NetScaler Global configuration settings, percentage of spillover quota (grantquotaspillover) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Grant Quota Spillover |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global ICMP Packets Threshold | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the number of ICMP packets permitted per 10 milliseconds. |
|
Knowledge Article |
SummaryThis rule monitors change of the number of ICMP packets permitted per 10 milliseconds. Default value: 100. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global ICMP Packets Threshold | |
Alert Message |
Citrix NetScaler Global configuration settings, ICMP packets threshold (icmpthreshold) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - ICMP Packets Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Log Transaction Buffer Size (MB) | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the buffer size (in MB) allocated for log transaction data on the system. |
|
Knowledge Article |
SummaryThis rule monitors change of the buffer size (in MB) allocated for log transaction data on the system. Maximum value is limited by the memory available in the system. Minimum value = 1 Maximum value = 4294967294LU. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Log Transaction Buffer Size (MB) | |
Alert Message |
Citrix NetScaler Global configuration settings, buffer size for log transaction (buffersizemb) has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Log Transaction Buffer Size in MB |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global Min Path MTU | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the minimum Path MTU. |
|
Knowledge Article |
SummaryThis rule monitors change of the minimum Path MTU. Default value: 576 Minimum value = 168 Maximum value = 1500. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global Min Path MTU | |
Alert Message |
Citrix NetScaler Global configuration settings, minimum path MTU (pmtumin) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - Min Path MTU |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global PMTU Timeout | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, PMTU timeout value in minutes. |
|
Knowledge Article |
SummaryThis rule monitors change of the timeout value in minutes. Default value: 10 Minimum value = 1 Maximum value = 1440. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global PMTU Timeout | |
Alert Message |
Citrix NetScaler Global configuration settings, PMTU timeout (pmtutimeout) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - PMTU Timeout |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global RBA Response State | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, whether RBA on response is enabled/disabled. |
|
Knowledge Article |
SummaryThis rule monitors change of configuration parameter that specifies whether RBA on response is enabled/disabled. Default value: ENABLED Possible values = ENABLED, DISABLED. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global RBA Response State | |
Alert Message |
Citrix NetScaler Global configuration settings, state of RBA on response (rbaonresponse) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - RBA Response State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global TCP Proxy State | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the state of TCP proxy. |
|
Knowledge Article |
SummaryThis rule monitors the state of TCP proxy parameter in Citrix NetScaler configuration. Default value: ENABLED Possible values = ENABLED, DISABLED. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global TCP Proxy State | |
Alert Message |
Citrix NetScaler Global configuration settings, state of TCP proxy (tcpproxy) parameter has been changed to {0} in NetScaler Appliance {1} (0 represents DISABLED and 1 represents ENABLED state.). |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - TCP Proxy State |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime | |
Debug | false |
CacheExpirationFactor | 1 |
Priority | 0 |
Severity | 0 |
Display Name | Config Param Change Global TCP SYN Threshold | |
---|---|---|
Description |
Monitors change of NetScaler Global settings, the number of SYNs permitted per 10 millisecond. |
|
Knowledge Article |
SummaryThis rule monitors change of the number of SYN packets permitted per 10 milliseconds. This rule is disabled by default. ConfigurationThe following configuration parameters are customizable:
|
|
Target | Citrix NetScaler Appliance | |
Enabled by default | No | |
Category | PerformanceCollection | |
Generate Alert | True | |
Alert Name | Config Param Change Global TCP SYN Threshold | |
Alert Message |
Citrix NetScaler Global configuration settings, TCP SYN threshold (tcpthreshold) parameter has been changed to {0} in NetScaler Appliance {1}. |
|
Object Name | NetScaler Configuration Change - Global | |
Counter Name | Global Param - TCP SYN Threshold |
Parameter | Default Value |
---|---|
IntervalSeconds | 900 |
SyncTime |