Citrix SCOM Management Pack for NetScaler Reference Guide

Table of Contents

  1. Citrix SCOM Management Pack for NetScaler Reference Guide
    1. About
      1. Citrix Management Pack Library
      2. Citrix NetScaler Appliance (v10.x and later) Discovery Library
      3. Citrix NetScaler Appliance (v10.x and later) Component Library
      4. Citrix NetScaler Appliance (v10.x and later) Monitoring Library
      5. Citrix NetScaler Appliance (v9.x) Discovery Library
      6. Citrix NetScaler Appliance (v9.x) Component Library
      7. Citrix NetScaler Device Discovery Library
      8. Citrix NetScaler Appliance Component Library
      9. Citrix NetScaler Module Library
      10. Citrix NetScaler Monitoring Library
    2. Discoveries
    3. Monitors
      1. Citrix NetScaler Access Gateway Virtual Server
        1. Access Gateway Virtual Server - Availability State Monitor
        2. Access Gateway Virtual Server - Current Users Percentage
        3. Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor
        4. Access Gateway Virtual Server - Requests Total No Change Performance Monitor
        5. Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor
        6. Access Gateway Virtual Server - Responses Total No Change Performance Monitor
        7. VPN Server Requests Rate Performance Monitor
      2. Citrix NetScaler Appliance
        1. AAA - Authentication Failure Ratio
        2. AAA - Authentication Failures
        3. AAA - Current AAA Sessions Drop
        4. AAA - Current AAA Sessions Minimum
        5. AAA - HTTP Authorization Failure Ratio
        6. AAA - HTTP Authorization Failures
        7. AAA - Non HTTP Authorization Failure Ratio
        8. AAA - Non HTTP Authorization Failures
        9. Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage
        10. Access Gateway VPN CSG Statistics - SOCKS Client Errors
        11. Access Gateway VPN CSG Statistics - SOCKS Server Errors
        12. Access Gateway VPN CSG Statistics - STA Connection Failure Percentage
        13. Access Gateway VPN General - Login-page Delivery Failure Percentage
        14. Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled
        15. Access Gateway VPN Login Failure - IIP Failed And MIP Disabled
        16. Access Gateway VPN Login Success - IIP Disabled And MIP Used
        17. Access Gateway VPN Login Success - IIP Failed And MIP Used
        18. Access Gateway VPN Login Success - IIP Spillover And MIP Used
        19. Appliance Monitoring Availability
        20. Citrix NetScaler CPU Usage
        21. Citrix NetScaler Flash Disk Partition Percentage Usage
        22. Citrix NetScaler Global Memory Percentage Usage
        23. Citrix NetScaler TCP SYN Packets Received Rate Usage
        24. Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage
        25. Citrix NetScaler UDP Packets Received Rate Usage
        26. Citrix NetScaler UDP Packets Transmitted Rate Usage
        27. Citrix NetScaler var Disk Partition Percentage Usage
        28. Fan Speed (RPM) - 0
        29. Fan Speed (RPM) - 1
        30. Fan Speed (RPM) - 2
        31. Fan Speed (RPM) - 3
        32. Fan Speed (RPM) - CPU 0
        33. Fan Speed (RPM) - CPU 1
        34. Fan Speed (RPM) - System
        35. Fan Speed (RPM) - System 1
        36. Fan Speed (RPM) - System 2
        37. High Availability Node - Master State
        38. nCore Consistency
        39. Power Supply 1 Status
        40. Power Supply 2 Status
        41. Protocol IP - Address Lookups Failure Percentage
        42. Protocol IP - Land-Attacks
        43. Protocol IP - Max Non-TCP Clients
        44. Protocol IP - Packets With Bad MAC Sent
        45. Protocol IP - Packets With MTU Length Greater Than 1514 Bytes
        46. Protocol IP - Unknown Services
        47. Protocol IPv6 - Error Header Packets
        48. Protocol IPv6 - Land-Attacks
        49. Protocol IPv6 - Reassembled Data Too Big
        50. Protocol IPv6 - Unsupported Next Header
        51. Protocol IPv6 - Zero Fragment Length Received
        52. Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor
        53. Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor
        54. Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor
        55. Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor
        56. Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
        57. Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
        58. Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
        59. Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
        60. Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
        61. Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
        62. Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
        63. Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
        64. Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
        65. Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
        66. Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
        67. Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
        68. Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
        69. Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor
        70. Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor
        71. Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor
        72. Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor
        73. Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor
        74. Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor
        75. Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate
        76. Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor
        77. Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate
        78. Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor
        79. Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate
        80. Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor
        81. Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate
        82. Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor
        83. Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate
        84. Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor
        85. Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate
        86. Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor
        87. Protocol SSL - Back-End Sessions Total No Change Performance Monitor
        88. Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor
        89. Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor
        90. Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor
        91. Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor
        92. Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
        93. Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
        94. Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
        95. Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
        96. Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
        97. Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
        98. Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
        99. Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
        100. Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
        101. Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
        102. Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
        103. Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
        104. Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
        105. Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor
        106. Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor
        107. Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor
        108. Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor
        109. Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor
        110. Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor
        111. Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor
        112. Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor
        113. Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate
        114. Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor
        115. Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate
        116. Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor
        117. Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate
        118. Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor
        119. Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate
        120. Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor
        121. Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate
        122. Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor
        123. Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate
        124. Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor
        125. Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate
        126. Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor
        127. Protocol SSL - Front-End Sessions Total No Change Performance Monitor
        128. Protocol SSL - SSL Card Status
        129. Protocol SSL - SSL Engine Status
        130. Protocol SSL - SSL Transactions Total No Change Performance Monitor
        131. Temperature Monitor - CPU 0 (Celsius)
        132. Temperature Monitor - CPU 1 (Celsius)
        133. Temperature Monitor - Device 0 (Celsius)
        134. Temperature Monitor - Device 1 (Celsius)
        135. Temperature Monitor - Device 2 (Celsius)
        136. Temperature Monitor - Device 3 (Celsius)
        137. Temperature Monitor - Internal (Celsius)
      3. Citrix NetScaler Appliance (v10.x and later)
        1. AAA - Current ICAOnly Sessions Drop
        2. AAA - Current ICAOnly Sessions Minimum
      4. Citrix NetScaler Appliance Channel
        1. Channel Availability State Monitor
      5. Citrix NetScaler Appliance IPv4
        1. IPv4 Address Conflict
      6. Citrix NetScaler Appliance IPv6
        1. IPv6 Address Conflict
      7. Citrix NetScaler Appliance LDAP Authentication Server
        1. Authentication Server LDAP - Authentication Failures
      8. Citrix NetScaler Appliance Memory Pool
        1. Citrix NetScaler Feature Memory Percentage Usage
      9. Citrix NetScaler Appliance Network Interface
        1. Interface Availability State Monitor
      10. Citrix NetScaler Appliance Radius Authentication Server
        1. Authentication Server Radius - Authentication Failures
      11. Citrix NetScaler Appliance SSL Certificate
        1. SSL Certificate Expiration Configuration State Monitor
      12. Citrix NetScaler Appliance TACACS Authentication Server
        1. Authentication Server TACACS - Authentication Failures
      13. LB Service
        1. Load Balancing Service - State Monitor
      14. LB Service Groups
        1. Load Balancing Service Group - Effective State Monitor
      15. LB Virtual Server
        1. Load Balancing Virtual Server - Health Status Percentage
        2. Load Balancing Virtual Server - State Monitor
      16. NetScaler Appliance (v10.x and later) SSL Action
        1. SSL Action Hits Not Changed
        2. SSL Action Undef Hits
      17. NetScaler Appliance (v10.x and later) SSL Policy
        1. SSL Policy Undef Hits
      18. NetScaler Base Class For Setting Component
        1. Appliance Components Configuration Monitoring Availability
      19. NetScaler SSL Policy
        1. SSL Policy Hits Not Changed
    4. Rules
      1. Citrix NetScaler Access Gateway Virtual Server
        1. Access Gateway Virtual Server - Current AAA Users
        2. Access Gateway Virtual Server - Current Users Percentage
        3. Access Gateway Virtual Server - Request Bytes (Rate)
        4. Access Gateway Virtual Server - Request Bytes Threshold (Rate)
        5. Access Gateway Virtual Server - Requests (Rate)
        6. Access Gateway Virtual Server - Requests Threshold (Rate)
        7. Access Gateway Virtual Server - Response Bytes (Rate)
        8. Access Gateway Virtual Server - Response Bytes Threshold (Rate)
        9. Access Gateway Virtual Server - Responses (Rate)
        10. Access Gateway Virtual Server - Responses Threshold (Rate)
      2. Citrix NetScaler Appliance
        1. AAA - AAA Sessions
        2. AAA - AAA Sessions (Rate)
        3. AAA - Authentication Failures
        4. AAA - Authentication Failures (Rate)
        5. AAA - Authentication Success
        6. AAA - Authentication Success (Rate)
        7. AAA - Authentication Success Ratio
        8. AAA - Current AAA Sessions
        9. AAA - Current AAA Sessions (Rate)
        10. AAA - HTTP Authorization Failure
        11. AAA - HTTP Authorization Failure (Rate)
        12. AAA - HTTP Authorization Success
        13. AAA - HTTP Authorization Success (Rate)
        14. AAA - HTTP Authorization Success Ratio
        15. AAA - Non HTTP Authorization Failures
        16. AAA - Non HTTP Authorization Failures (Rate)
        17. AAA - Non HTTP Authorization Success
        18. AAA - Non HTTP Authorization Success (Rate)
        19. AAA - Non HTTP Authorization Success Ratio
        20. AAA - Timed Out AAA Sessions
        21. AAA - Timed Out AAA Sessions (Rate)
        22. Application Firewall - Aborts
        23. Application Firewall - Aborts Rate
        24. Application Firewall - Redirects
        25. Application Firewall - Redirects Rate
        26. Application Firewall - Requests
        27. Application Firewall - Requests Rate
        28. Application Firewall - Responses
        29. Application Firewall - Responses Rate
        30. Cache - 304 Hits Rate
        31. Cache - 64 Maximum Memory (KB)
        32. Cache - Hits Rate
        33. Cache - Maximum Memory (KB)
        34. Cache - Maximum Memory Active Value (KB)
        35. Cache - Misses Rate
        36. Cache - Non-304 Hits Rate
        37. Cache - Origin Bandwidth Saved (%)
        38. Cache - Requests Rate
        39. Cache - Total 304 Hits
        40. Cache - Total Hits
        41. Cache - Total Misses
        42. Cache - Total Non-304 Hits
        43. Cache - Total Requests
        44. Cache - Utilized Memory (KB)
        45. Citrix NetScaler Device CPU Usage (in %)
        46. Citrix NetScaler Device Current Memory Allocated (in MB)
        47. Citrix NetScaler Device Global Memory Usage (in %)
        48. Citrix NetScaler Device Global Memory Usage (in MB)
        49. Compression - Compressed Bytes Transmitted (Rate)
        50. Compression - Compressed Bytes Transmitted (Total)
        51. Compression - Compressible Bytes Received (Rate)
        52. Compression - Compressible Bytes Received (Total)
        53. Compression - HTTP Compression Ratio
        54. Compression - Total HTTP Compression Ratio
        55. Config Param Change Feature AppFlow State
        56. Config Param Change Feature Application Firewall State
        57. Config Param Change Feature Authentication Authorization Auditing State
        58. Config Param Change Feature BGP Routing State
        59. Config Param Change Feature Cache Redirect State
        60. Config Param Change Feature Cloud Bridge State
        61. Config Param Change Feature Compression State
        62. Config Param Change Feature Content Filter State
        63. Config Param Change Feature Content Switching State
        64. Config Param Change Feature DOS Protection State
        65. Config Param Change Feature GSLB State
        66. Config Param Change Feature HTML Injection State
        67. Config Param Change Feature Integrated Caching State
        68. Config Param Change Feature IPv6 Translation State
        69. Config Param Change Feature Load Balancing State
        70. Config Param Change Feature OSPF Routing State
        71. Config Param Change Feature Priority Queuing State
        72. Config Param Change Feature Push State
        73. Config Param Change Feature Responder State
        74. Config Param Change Feature Rewrite State
        75. Config Param Change Feature RIP Routing State
        76. Config Param Change Feature SSL State
        77. Config Param Change Feature SSL VPN State
        78. Config Param Change Feature Sure Connect State
        79. Config Param Change Feature Surge Protection State
        80. Config Param Change Feature Web Logging State
        81. Config Param Change Global Base Threshold
        82. Config Param Change Global Exclusive Quota Max Client
        83. Config Param Change Global Exclusive Quota Spillover
        84. Config Param Change Global Grant Quota Max Client
        85. Config Param Change Global Grant Quota Spillover
        86. Config Param Change Global ICMP Packets Threshold
        87. Config Param Change Global Log Transaction Buffer Size (MB)
        88. Config Param Change Global Min Path MTU
        89. Config Param Change Global PMTU Timeout
        90. Config Param Change Global RBA Response State
        91. Config Param Change Global TCP Proxy State
        92. Config Param Change Global TCP SYN Threshold
        93. Config Param Change Global Throttle Rate
        94. Config Param Change Global UDP Packets Threshold
        95. Config Param Change HTTP Client IP Header State
        96. Config Param Change HTTP Connection Multiplexing State
        97. Config Param Change HTTP Cookie Version
        98. Config Param Change HTTP Drop Invalid ReqResp State
        99. Config Param Change HTTP Log Error Responses State
        100. Config Param Change HTTP Mark Connect Requests Invalid State
        101. Config Param Change HTTP Mark HTTP09 Invalid State
        102. Config Param Change HTTP Max Connections
        103. Config Param Change HTTP Max Requests
        104. Config Param Change HTTP Max Reuse Pool Connections
        105. Config Param Change HTTP Secure Cookie State
        106. Config Param Change HTTP Server Header Insertion State
        107. Config Param Change License Agee State
        108. Config Param Change License AppFlow State
        109. Config Param Change License Application Firewall State
        110. Config Param Change License Authentication Authorization Auditing State
        111. Config Param Change License BGP Routing State
        112. Config Param Change License Cache Redirect State
        113. Config Param Change License Cloud Bridge Appliance State
        114. Config Param Change License Cloud Bridge State
        115. Config Param Change License Compression State
        116. Config Param Change License Content Filter State
        117. Config Param Change License Content Switching State
        118. Config Param Change License Delta Compression State
        119. Config Param Change License DOS Protection State
        120. Config Param Change License GSLB Proximity State
        121. Config Param Change License GSLB State
        122. Config Param Change License HTML Injection State
        123. Config Param Change License ICAONLY Users
        124. Config Param Change License Integrated Caching State
        125. Config Param Change License IPv6 Translation State
        126. Config Param Change License Load Balancing State
        127. Config Param Change License Model ID
        128. Config Param Change License NSXN State
        129. Config Param Change License OSPF Routing State
        130. Config Param Change License Priority Queuing State
        131. Config Param Change License Push State
        132. Config Param Change License Responder State
        133. Config Param Change License Rewrite State
        134. Config Param Change License RIP Routing State
        135. Config Param Change License Routing State
        136. Config Param Change License SSL State
        137. Config Param Change License SSL VPN State
        138. Config Param Change License SSL VPN Users
        139. Config Param Change License Sure Connect State
        140. Config Param Change License Surge Protection State
        141. Config Param Change License Web Logging State
        142. Config Param Change License WIonNS State
        143. Config Param Change Mode BPDU Bridging Mode State
        144. Config Param Change Mode Client Keep Alive State
        145. Config Param Change Mode Direct Route Advertisement State
        146. Config Param Change Mode Edge Configuration State
        147. Config Param Change Mode Fast Ramp State
        148. Config Param Change Mode Intranet Route Advertisement State
        149. Config Param Change Mode IPv6 Direct Route Advertisement State
        150. Config Param Change Mode IPv6 Static Route Advertisement State
        151. Config Param Change Mode Layer 2 State
        152. Config Param Change Mode Layer 3 State
        153. Config Param Change Mode MAC-based Forwarding State
        154. Config Param Change Mode Path MTU Discovery State
        155. Config Param Change Mode Static Route Advertisement State
        156. Config Param Change Mode TCP Buffering State
        157. Config Param Change Mode Use Source IP State
        158. Config Param Change Mode Use Subnet IP State
        159. Config Param Change TCP ACK Push State
        160. Config Param Change TCP Buffering Memory Limit
        161. Config Param Change TCP Connection Buffer Size
        162. Config Param Change TCP Delayed Acknowledgement Timeout
        163. Config Param Change TCP Initial CWnd
        164. Config Param Change TCP Limited Persist State
        165. Config Param Change TCP Max Burst Factor
        166. Config Param Change TCP Max Packets Per MSS
        167. Config Param Change TCP Max Server Probes
        168. Config Param Change TCP Max SYN Hold
        169. Config Param Change TCP Max SYN Hold Per Probe
        170. Config Param Change TCP Max Time Wait Connection
        171. Config Param Change TCP Min RTO
        172. Config Param Change TCP MSS Learn Delay
        173. Config Param Change TCP MSS Learn Interval
        174. Config Param Change TCP Nagle State
        175. Config Param Change TCP Out-of-Order Packet Size
        176. Config Param Change TCP Partial ACK Max Packets Retransmitted
        177. Config Param Change TCP RST Services Switch State
        178. Config Param Change TCP SACK State
        179. Config Param Change TCP Slow Start Increment Factor
        180. Config Param Change TCP Syn Hold Fast Giveup
        181. Config Param Change TCP Virtual Server MSS Learning State
        182. Config Param Change TCP Window Scaling Factor
        183. Config Param Change TCP Window Scaling State
        184. Config Param Change Timeout ANY Client Idle Time
        185. Config Param Change Timeout ANY Server Idle Time
        186. Config Param Change Timeout Client Idle Time
        187. Config Param Change Timeout Half-closed Connection Time
        188. Config Param Change Timeout HTTP Client Idle Time
        189. Config Param Change Timeout HTTP Server Idle Time
        190. Config Param Change Timeout NonTCP Zombie Cleanup
        191. Config Param Change Timeout Server Idle Time
        192. Config Param Change Timeout TCP Client Idle Time
        193. Config Param Change Timeout TCP Server Idle Time
        194. Config Param Change Timeout Zombie Cleanup
        195. Config Param Change VLAN Subnet NSVLAN
        196. Config Param Change VLAN Tagged Interfaces State
        197. Disk - /flash Available (MB)
        198. Disk - /flash Size (MB)
        199. Disk - /flash Used (%)
        200. Disk - /flash Used (MB)
        201. Disk - /var Available (MB)
        202. Disk - /var Size (MB)
        203. Disk - /var Used (%)
        204. Disk - /var Used (MB)
        205. Protocol HTTP - HTTP 1.0 Received Requests Total
        206. Protocol HTTP - HTTP 1.0 Requests Rate
        207. Protocol HTTP - HTTP 1.0 Responses Rate
        208. Protocol HTTP - HTTP 1.0 Sent Responses Total
        209. Protocol HTTP - HTTP 1.1 Received Requests Total
        210. Protocol HTTP - HTTP 1.1 Requests Rate
        211. Protocol HTTP - HTTP 1.1 Responses Rate
        212. Protocol HTTP - HTTP 1.1 Sent Responses Total
        213. Protocol HTTP - HTTP Chunked Requests Rate
        214. Protocol HTTP - HTTP Chunked Requests Total
        215. Protocol HTTP - HTTP Chunked Responses Rate
        216. Protocol HTTP - HTTP Chunked Responses Total
        217. Protocol HTTP - HTTP Content Length Field Set Requests Rate
        218. Protocol HTTP - HTTP Content Length Field Set Requests Total
        219. Protocol HTTP - HTTP Content Length Field Set Responses Rate
        220. Protocol HTTP - HTTP Content Length Field Set Responses Total
        221. Protocol HTTP - HTTP DOS Condition Triggered Rate
        222. Protocol HTTP - HTTP DOS Condition Triggered Total
        223. Protocol HTTP - HTTP DOS Priority Clients Rate
        224. Protocol HTTP - HTTP DOS Priority Clients Total
        225. Protocol HTTP - HTTP DOS Valid Cookies Rate
        226. Protocol HTTP - HTTP DOS Valid Cookies Total
        227. Protocol HTTP - HTTP Error Incomplete Headers Total
        228. Protocol HTTP - HTTP Error Incomplete Requests Rate
        229. Protocol HTTP - HTTP Error Incomplete Requests Total
        230. Protocol HTTP - HTTP Error Incomplete Responses Rate
        231. Protocol HTTP - HTTP Error Incomplete Responses Total
        232. Protocol HTTP - HTTP Error Large Chunk Size Total
        233. Protocol HTTP - HTTP Error Large Content Total
        234. Protocol HTTP - HTTP Error Large Requests Content Total
        235. Protocol HTTP - HTTP Error No Reuse Multipart Rate
        236. Protocol HTTP - HTTP Error No Reuse Multipart Total
        237. Protocol HTTP - HTTP Error Responses Total
        238. Protocol HTTP - HTTP Error Server Busy Rate
        239. Protocol HTTP - HTTP Error Server Busy Responses Total
        240. Protocol HTTP - HTTP FIN-terminated Responses Rate
        241. Protocol HTTP - HTTP FIN-terminated Responses Total
        242. Protocol HTTP - HTTP GET Requests Total
        243. Protocol HTTP - HTTP GETs Rate
        244. Protocol HTTP - HTTP Incomplete Headers
        245. Protocol HTTP - HTTP Incomplete Request Headers
        246. Protocol HTTP - HTTP Incomplete Response Headers
        247. Protocol HTTP - HTTP Large/Invalid Chunk Requests
        248. Protocol HTTP - HTTP Large/Invalid Content-length
        249. Protocol HTTP - HTTP Large/Invalid Messages
        250. Protocol HTTP - HTTP Other Methods Rate
        251. Protocol HTTP - HTTP Other Requests Total
        252. Protocol HTTP - HTTP POST Rate
        253. Protocol HTTP - HTTP POST Requests Total
        254. Protocol HTTP - HTTP Received Request Bytes Rate
        255. Protocol HTTP - HTTP Received Request Bytes Total
        256. Protocol HTTP - HTTP Received Requests Total
        257. Protocol HTTP - HTTP Received Response Bytes Rate
        258. Protocol HTTP - HTTP Received Response Bytes Total
        259. Protocol HTTP - HTTP Requests Rate
        260. Protocol HTTP - HTTP Responses Rate
        261. Protocol HTTP - HTTP Sent Responses Total
        262. Protocol HTTP - HTTP Transmitted Request Bytes Rate
        263. Protocol HTTP - HTTP Transmitted Request Bytes Total
        264. Protocol HTTP - HTTP Transmitted Response Bytes Rate
        265. Protocol HTTP - HTTP Transmitted Response Bytes Total
        266. Protocol IP - Fragments Received (Total)
        267. Protocol IP - Land-Attacks
        268. Protocol IP - Max Non-TCP Clients
        269. Protocol IP - Packets With Bad MAC Sent
        270. Protocol IP - Packets With Len > 1514 rcvd
        271. Protocol IP - Unknown Services
        272. Protocol IPv6 - Error Header Packets
        273. Protocol IPv6 - Fragments Received (Total)
        274. Protocol IPv6 - Land-Attacks
        275. Protocol IPv6 - Reassembled Data Too Big
        276. Protocol IPv6 - Unsupported Next Header
        277. Protocol IPv6 - Zero Fragment Length Received
        278. Protocol SSL - Back End Session Renegotiations SSL (Total)
        279. Protocol SSL - Back End Session Renegotiations SSLv3 (Total)
        280. Protocol SSL - Back End Session Renegotiations TLSv1 (Total)
        281. Protocol SSL - Back End Sessions (Total)
        282. Protocol SSL - Back-End Key Exchanges DH1024 Rate
        283. Protocol SSL - Back-End Key Exchanges DH2048 Rate
        284. Protocol SSL - Back-End Key Exchanges DH512 Rate
        285. Protocol SSL - Back-End Key Exchanges RSA1024 Rate
        286. Protocol SSL - Back-End Key Exchanges RSA2048 Rate
        287. Protocol SSL - Back-End Key Exchanges RSA512 Rate
        288. Protocol SSL - Front End Session Renegotiations SSL (Total)
        289. Protocol SSL - Front End Session Renegotiations SSLv3 (Total)
        290. Protocol SSL - Front End Session Renegotiations TLSv1 (Total)
        291. Protocol SSL - Front End Sessions (Total)
        292. Protocol SSL - Front-End Key Exchanges DH1024 Rate
        293. Protocol SSL - Front-End Key Exchanges DH2048 Rate
        294. Protocol SSL - Front-End Key Exchanges DH512 Rate
        295. Protocol SSL - Front-End Key Exchanges RSA1024 Rate
        296. Protocol SSL - Front-End Key Exchanges RSA2048 Rate
        297. Protocol SSL - Front-End Key Exchanges RSA4096 Rate
        298. Protocol SSL - Front-End Key Exchanges RSA512 Rate
        299. Protocol SSL - Offloaded Encryptions AES (Total)
        300. Protocol SSL - Offloaded Encryptions DES (Total)
        301. Protocol SSL - Offloaded Encryptions RC4 (Total)
        302. Protocol SSL - Offloaded Key Exchanges DH (Total)
        303. Protocol SSL - Offloaded Key Exchanges RSA (Total)
        304. Protocol SSL - Offloaded Sign Operations RSA (Total)
        305. Protocol SSL - Session Hits (Total)
        306. Protocol SSL - Session Misses (Total)
        307. Protocol SSL - Session Multiplex Attempts (Total)
        308. Protocol SSL - Session Multiplex Failures (Total)
        309. Protocol SSL - Session Multiplex Successes (Total)
        310. Protocol TCP - Active Server Connections
        311. Protocol TCP - All Client Connections
        312. Protocol TCP - All Server Connections
        313. Protocol TCP - Closing Client Connections
        314. Protocol TCP - Closing Server Connections
        315. Protocol TCP - Established Client Connections
        316. Protocol TCP - Established Server Connections
        317. Protocol TCP - Opening Client Connections
        318. Protocol TCP - Opening Server Connections
        319. Protocol TCP - Retransmitted Packets Rule
        320. Protocol TCP - Seq Number SYN Cookie Reject (Total)
        321. Protocol TCP - Signature SYN Cookie Reject (Total)
        322. Protocol TCP - Spare Connections
        323. Protocol TCP - Surge Queue
        324. Protocol TCP - Transmitted Packets Loss Percentage (Rate)
        325. Protocol UDP - Bad Checksum Packets Total
        326. Protocol UDP - Current Rate Threshold Exceeds Total
        327. Protocol UDP - Current Rate Threshold Total
        328. Protocol UDP - Received Bytes Rate
        329. Protocol UDP - Received Bytes Total
        330. Protocol UDP - Received Packets Rate
        331. Protocol UDP - Received Packets Total
        332. Protocol UDP - Transmitted Bytes Rate
        333. Protocol UDP - Transmitted Bytes Total
        334. Protocol UDP - Transmitted Packets Rate
        335. Protocol UDP - Transmitted Packets Total
        336. Protocol UDP - Unknown Service Packet Drop Total
        337. Temperature - CPU 0 (Celsius)
        338. Temperature - CPU 1 (Celsius)
        339. Temperature - Device 0 (Celsius)
        340. Temperature - Device 1 (Celsius)
        341. Temperature - Device 2 (Celsius)
        342. Temperature - Device 3 (Celsius)
        343. Temperature - Internal (Celsius)
        344. VPN CSG Statistics - CPS Connection Failure (Total)
        345. VPN CSG Statistics - CPS Connection Success (Total)
        346. VPN CSG Statistics - ICA License Failure (Total)
        347. VPN CSG Statistics - SOCKS Client Error (Total)
        348. VPN CSG Statistics - SOCKS Connect Request Received (Total)
        349. VPN CSG Statistics - SOCKS Connect Request Sent (Total)
        350. VPN CSG Statistics - SOCKS Connect Response Received (Total)
        351. VPN CSG Statistics - SOCKS Connect Response Sent (Total)
        352. VPN CSG Statistics - SOCKS Method Request Received (Total)
        353. VPN CSG Statistics - SOCKS Method Request Sent (total)
        354. VPN CSG Statistics - SOCKS Method Response Received (Total)
        355. VPN CSG Statistics - SOCKS Method Response Sent (Total)
        356. VPN CSG Statistics - SOCKS Server Error (Total)
        357. VPN CSG Statistics - STA Connection Failure (Total)
        358. VPN CSG Statistics - STA Connection Success (Total)
        359. VPN CSG Statistics - STA Request Sent (Total)
        360. VPN CSG Statistics - STA Response Received (Total)
        361. VPN General - Backend HTTP Server Probes (Total)
        362. VPN General - Backend Non HTTP Server Probes (Total)
        363. VPN General - Backend Server Probe Successes (Total)
        364. VPN General - Client Configuration Requests (Total)
        365. VPN General - DNS Queries Resolved (Total)
        366. VPN General - File System Requests Received (Total)
        367. VPN General - Login Page Delivery Failures (Total)
        368. VPN General - Login Page Requests Received (Total)
        369. VPN General - Number Of SSL VPN Tunnels (Total)
        370. VPN General - WINS Queries Resolved (Total)
        371. VPN ICA Connections Count
        372. VPN Login Failure - IIP Disabled And MIP Disabled (Total)
        373. VPN Login Failure - IIP Failed And MIP Disabled (Total)
        374. VPN Login Success - IIP Disabled And MIP Used (Total)
        375. VPN Login Success - IIP Failed And MIP Used (Total)
        376. VPN Login Success - IIP Spillover And MIP Used (Total)
      3. Citrix NetScaler Appliance (v10.x and later)
        1. AAA - Current ICAOnly Sessions
        2. AAA - Current ICAOnly Sessions (Rate)
        3. Config Param Change Diameter Server Close Propagation
        4. Config Param Change Feature Call Home State
        5. Config Param Change Feature ISIS Routing State
        6. Config Param Change Feature Routing State
        7. Config Param Change Global NATPCB Force Flush Limit
        8. Config Param Change Global NATPCB RST Timeout State
        9. Config Param Change License Call Home State
        10. Config Param Change License Cloud Extender Appliance State
        11. Config Param Change License Clustering State
        12. Config Param Change License ISIS Routing State
        13. Config Param Change TCP Max SynAck Retransmission
        14. Config Param Change TCP Receive Buffer Size
        15. Config Param Change TCP SYN Attack Detection State
        16. Config Param Change Timeout NATPCB TCP Flow Time
        17. Config Param Change Timeout New Connection Idle Time
      4. Citrix NetScaler Appliance Channel
        1. Citrix NetScaler Channel Error Packets Received Rate
        2. Citrix NetScaler Channel Error Packets Transmitted Rate
        3. Citrix NetScaler Channel Inbound Packets Discarded Rate
        4. Citrix NetScaler Channel Multicast Packets Rate
        5. Citrix NetScaler Channel NetScaler Packets Rate
        6. Citrix NetScaler Channel Outbound Packets Discarded Rate
        7. Citrix NetScaler Channel Received Bytes Rate
        8. Citrix NetScaler Channel Received Packets Rate
        9. Citrix NetScaler Channel Rx Dropped Packets Rate
        10. Citrix NetScaler Channel Transmitted Bytes Rate
        11. Citrix NetScaler Channel Transmitted Packets Rate
        12. Citrix NetScaler Channel TX Dropped Packets Rate
        13. Config Param Change Channel State
      5. Citrix NetScaler Appliance IPv4
        1. Config Param Change IPv4 State
      6. Citrix NetScaler Appliance IPv6
        1. Config Param Change IPv6 State
      7. Citrix NetScaler Appliance Memory Pool
        1. Citrix NetScaler Device Feature Memory Usage (in %)
      8. Citrix NetScaler Appliance Network Interface
        1. Citrix NetScaler Interface Error Packets Received Rate
        2. Citrix NetScaler Interface Error Packets Transmitted Rate
        3. Citrix NetScaler Interface Inbound Packets Discarded Rate
        4. Citrix NetScaler Interface Multicast Packets Rate
        5. Citrix NetScaler Interface NetScaler Packets Rate
        6. Citrix NetScaler Interface Outbound Packets Discarded Rate
        7. Citrix NetScaler Interface Received Bytes Rate
        8. Citrix NetScaler Interface Received Packets Rate
        9. Citrix NetScaler Interface Rx Dropped Packets Rate
        10. Citrix NetScaler Interface Transmitted Bytes Rate
        11. Citrix NetScaler Interface Transmitted Packets Rate
        12. Citrix NetScaler Interface TX Dropped Packets Rate
        13. Config Param Change Interface State
      9. LB Service
        1. Citrix NetScaler Load Balancing Average TTFB Between NetScaler Appliance And Server
        2. Citrix NetScaler Load Balancing Current Load On Service
      10. NetScaler Appliance (v10.x and later) SSL Action
        1. SSL Action - Hits
        2. SSL Action - Reference Count
        3. SSL Action - Undef Hits
      11. NetScaler Appliance (v10.x and later) SSL Policy
        1. SSL Policy - Undef Hits
      12. NetScaler SSL Policy
        1. SSL Policy - Hits
    5. Roll-up Monitors
    6. Tasks
    7. Views
    8. Disabled By Default
      1. Disabled Monitors
        1. Citrix NetScaler Appliance (v10.x and later)
        2. Citrix NetScaler Access Gateway Virtual Server
        3. Citrix NetScaler Appliance IPv4
        4. Citrix NetScaler Appliance IPv6
        5. Citrix NetScaler Appliance
      2. Disabled Rules
        1. NetScaler Appliance (v10.x and later) SSL Action
        2. Citrix NetScaler Appliance (v10.x and later)
        3. Citrix NetScaler Appliance Channel
        4. Citrix NetScaler Appliance Network Interface
        5. Citrix NetScaler Appliance IPv4
        6. Citrix NetScaler Appliance IPv6
        7. Citrix NetScaler Appliance
show page contents
TopAboutCitrix Management Pack LibraryCitrix NetScaler Appliance (v10.x and later) Discovery LibraryCitrix NetScaler Appliance (v10.x and later) Component LibraryCitrix NetScaler Appliance (v10.x and later) Monitoring LibraryCitrix NetScaler Appliance (v9.x) Discovery LibraryCitrix NetScaler Appliance (v9.x) Component LibraryCitrix NetScaler Device Discovery LibraryCitrix NetScaler Appliance Component LibraryCitrix NetScaler Module LibraryCitrix NetScaler Monitoring LibraryDiscoveriesMonitorsCitrix NetScaler Access Gateway Virtual ServerAccess Gateway Virtual Server - Availability State MonitorAccess Gateway Virtual Server - Current Users PercentageAccess Gateway Virtual Server - Request Bytes Total No Change Performance MonitorAccess Gateway Virtual Server - Requests Total No Change Performance MonitorAccess Gateway Virtual Server - Response Bytes Total No Change Performance MonitorAccess Gateway Virtual Server - Responses Total No Change Performance MonitorVPN Server Requests Rate Performance MonitorCitrix NetScaler ApplianceAAA - Authentication Failure RatioAAA - Authentication FailuresAAA - Current AAA Sessions DropAAA - Current AAA Sessions MinimumAAA - HTTP Authorization Failure RatioAAA - HTTP Authorization FailuresAAA - Non HTTP Authorization Failure RatioAAA - Non HTTP Authorization FailuresAccess Gateway VPN CSG Statistics - CPS Connection Failure PercentageAccess Gateway VPN CSG Statistics - SOCKS Client ErrorsAccess Gateway VPN CSG Statistics - SOCKS Server ErrorsAccess Gateway VPN CSG Statistics - STA Connection Failure PercentageAccess Gateway VPN General - Login-page Delivery Failure PercentageAccess Gateway VPN Login Failure - IIP Disabled And MIP DisabledAccess Gateway VPN Login Failure - IIP Failed And MIP DisabledAccess Gateway VPN Login Success - IIP Disabled And MIP UsedAccess Gateway VPN Login Success - IIP Failed And MIP UsedAccess Gateway VPN Login Success - IIP Spillover And MIP UsedAppliance Monitoring AvailabilityCitrix NetScaler CPU UsageCitrix NetScaler Flash Disk Partition Percentage UsageCitrix NetScaler Global Memory Percentage UsageCitrix NetScaler TCP SYN Packets Received Rate UsageCitrix NetScaler TCP Transmitted Packets Loss Rate Percentage UsageCitrix NetScaler UDP Packets Received Rate UsageCitrix NetScaler UDP Packets Transmitted Rate UsageCitrix NetScaler var Disk Partition Percentage UsageFan Speed (RPM) - 0Fan Speed (RPM) - 1Fan Speed (RPM) - 2Fan Speed (RPM) - 3Fan Speed (RPM) - CPU 0Fan Speed (RPM) - CPU 1Fan Speed (RPM) - SystemFan Speed (RPM) - System 1Fan Speed (RPM) - System 2High Availability Node - Master StatenCore ConsistencyPower Supply 1 StatusPower Supply 2 StatusProtocol IP - Address Lookups Failure PercentageProtocol IP - Land-AttacksProtocol IP - Max Non-TCP ClientsProtocol IP - Packets With Bad MAC SentProtocol IP - Packets With MTU Length Greater Than 1514 BytesProtocol IP - Unknown ServicesProtocol IPv6 - Error Header PacketsProtocol IPv6 - Land-AttacksProtocol IPv6 - Reassembled Data Too BigProtocol IPv6 - Unsupported Next HeaderProtocol IPv6 - Zero Fragment Length ReceivedProtocol SSL - Back-End Authorizations DH Authentications Total No Change Performance MonitorProtocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance MonitorProtocol SSL - Back-End Authorizations Null Authentications Total No Change Performance MonitorProtocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance MonitorProtocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance MonitorProtocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance MonitorProtocol SSL - Back-End Handshakes SSLv3 Total No Change Performance MonitorProtocol SSL - Back-End Handshakes TLSv1 Total No Change Performance MonitorProtocol SSL - Back-End Hashes MD5 Total No Change Performance MonitorProtocol SSL - Back-End Hashes SHA Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges DH1024 Threshold RateProtocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges DH2048 Threshold RateProtocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges DH512 Threshold RateProtocol SSL - Back-End Key Exchanges DH512 Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges RSA1024 Threshold RateProtocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges RSA2048 Threshold RateProtocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance MonitorProtocol SSL - Back-End Key Exchanges RSA512 Threshold RateProtocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance MonitorProtocol SSL - Back-End Sessions Total No Change Performance MonitorProtocol SSL - Front-End Authorizations DH Authentications Total No Change Performance MonitorProtocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance MonitorProtocol SSL - Front-End Authorizations Null Authentications Total No Change Performance MonitorProtocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance MonitorProtocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance MonitorProtocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance MonitorProtocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance MonitorProtocol SSL - Front-End Handshakes SSLv2 Total No Change Performance MonitorProtocol SSL - Front-End Handshakes SSLv3 Total No Change Performance MonitorProtocol SSL - Front-End Handshakes TLSv1 Total No Change Performance MonitorProtocol SSL - Front-End Hashes MD5 Total No Change Performance MonitorProtocol SSL - Front-End Hashes SHA Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges DH1024 Threshold RateProtocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges DH2048 Threshold RateProtocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges DH512 Threshold RateProtocol SSL - Front-End Key Exchanges DH512 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges RSA1024 Threshold RateProtocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges RSA2048 Threshold RateProtocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges RSA4096 Threshold RateProtocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance MonitorProtocol SSL - Front-End Key Exchanges RSA512 Threshold RateProtocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance MonitorProtocol SSL - Front-End Sessions Total No Change Performance MonitorProtocol SSL - SSL Card StatusProtocol SSL - SSL Engine StatusProtocol SSL - SSL Transactions Total No Change Performance MonitorTemperature Monitor - CPU 0 (Celsius)Temperature Monitor - CPU 1 (Celsius)Temperature Monitor - Device 0 (Celsius)Temperature Monitor - Device 1 (Celsius)Temperature Monitor - Device 2 (Celsius)Temperature Monitor - Device 3 (Celsius)Temperature Monitor - Internal (Celsius)Citrix NetScaler Appliance (v10.x and later)AAA - Current ICAOnly Sessions DropAAA - Current ICAOnly Sessions MinimumCitrix NetScaler Appliance ChannelChannel Availability State MonitorCitrix NetScaler Appliance IPv4IPv4 Address ConflictCitrix NetScaler Appliance IPv6IPv6 Address ConflictCitrix NetScaler Appliance LDAP Authentication ServerAuthentication Server LDAP - Authentication FailuresCitrix NetScaler Appliance Memory PoolCitrix NetScaler Feature Memory Percentage UsageCitrix NetScaler Appliance Network InterfaceInterface Availability State MonitorCitrix NetScaler Appliance Radius Authentication ServerAuthentication Server Radius - Authentication FailuresCitrix NetScaler Appliance SSL CertificateSSL Certificate Expiration Configuration State MonitorCitrix NetScaler Appliance TACACS Authentication ServerAuthentication Server TACACS - Authentication FailuresLB ServiceLoad Balancing Service - State MonitorLB Service GroupsLoad Balancing Service Group - Effective State MonitorLB Virtual ServerLoad Balancing Virtual Server - Health Status PercentageLoad Balancing Virtual Server - State MonitorNetScaler Appliance (v10.x and later) SSL ActionSSL Action Hits Not ChangedSSL Action Undef HitsNetScaler Appliance (v10.x and later) SSL PolicySSL Policy Undef HitsNetScaler Base Class For Setting ComponentAppliance Components Configuration Monitoring AvailabilityNetScaler SSL PolicySSL Policy Hits Not ChangedRulesCitrix NetScaler Access Gateway Virtual ServerAccess Gateway Virtual Server - Current AAA UsersAccess Gateway Virtual Server - Current Users PercentageAccess Gateway Virtual Server - Request Bytes (Rate)Access Gateway Virtual Server - Request Bytes Threshold (Rate)Access Gateway Virtual Server - Requests (Rate)Access Gateway Virtual Server - Requests Threshold (Rate)Access Gateway Virtual Server - Response Bytes (Rate)Access Gateway Virtual Server - Response Bytes Threshold (Rate)Access Gateway Virtual Server - Responses (Rate)Access Gateway Virtual Server - Responses Threshold (Rate)Citrix NetScaler ApplianceAAA - AAA SessionsAAA - AAA Sessions (Rate)AAA - Authentication FailuresAAA - Authentication Failures (Rate)AAA - Authentication SuccessAAA - Authentication Success (Rate)AAA - Authentication Success RatioAAA - Current AAA SessionsAAA - Current AAA Sessions (Rate)AAA - HTTP Authorization FailureAAA - HTTP Authorization Failure (Rate)AAA - HTTP Authorization SuccessAAA - HTTP Authorization Success (Rate)AAA - HTTP Authorization Success RatioAAA - Non HTTP Authorization FailuresAAA - Non HTTP Authorization Failures (Rate)AAA - Non HTTP Authorization SuccessAAA - Non HTTP Authorization Success (Rate)AAA - Non HTTP Authorization Success RatioAAA - Timed Out AAA SessionsAAA - Timed Out AAA Sessions (Rate)Application Firewall - AbortsApplication Firewall - Aborts RateApplication Firewall - RedirectsApplication Firewall - Redirects RateApplication Firewall - RequestsApplication Firewall - Requests RateApplication Firewall - ResponsesApplication Firewall - Responses RateCache - 304 Hits RateCache - 64 Maximum Memory (KB)Cache - Hits RateCache - Maximum Memory (KB)Cache - Maximum Memory Active Value (KB)Cache - Misses RateCache - Non-304 Hits RateCache - Origin Bandwidth Saved (%)Cache - Requests RateCache - Total 304 HitsCache - Total HitsCache - Total MissesCache - Total Non-304 HitsCache - Total RequestsCache - Utilized Memory (KB)Citrix NetScaler Device CPU Usage (in %)Citrix NetScaler Device Current Memory Allocated (in MB)Citrix NetScaler Device Global Memory Usage (in %)Citrix NetScaler Device Global Memory Usage (in MB)Compression - Compressed Bytes Transmitted (Rate)Compression - Compressed Bytes Transmitted (Total)Compression - Compressible Bytes Received (Rate)Compression - Compressible Bytes Received (Total)Compression - HTTP Compression RatioCompression - Total HTTP Compression RatioConfig Param Change Feature AppFlow StateConfig Param Change Feature Application Firewall StateConfig Param Change Feature Authentication Authorization Auditing StateConfig Param Change Feature BGP Routing StateConfig Param Change Feature Cache Redirect StateConfig Param Change Feature Cloud Bridge StateConfig Param Change Feature Compression StateConfig Param Change Feature Content Filter StateConfig Param Change Feature Content Switching StateConfig Param Change Feature DOS Protection StateConfig Param Change Feature GSLB StateConfig Param Change Feature HTML Injection StateConfig Param Change Feature Integrated Caching StateConfig Param Change Feature IPv6 Translation StateConfig Param Change Feature Load Balancing StateConfig Param Change Feature OSPF Routing StateConfig Param Change Feature Priority Queuing StateConfig Param Change Feature Push StateConfig Param Change Feature Responder StateConfig Param Change Feature Rewrite StateConfig Param Change Feature RIP Routing StateConfig Param Change Feature SSL StateConfig Param Change Feature SSL VPN StateConfig Param Change Feature Sure Connect StateConfig Param Change Feature Surge Protection StateConfig Param Change Feature Web Logging StateConfig Param Change Global Base ThresholdConfig Param Change Global Exclusive Quota Max ClientConfig Param Change Global Exclusive Quota SpilloverConfig Param Change Global Grant Quota Max ClientConfig Param Change Global Grant Quota SpilloverConfig Param Change Global ICMP Packets ThresholdConfig Param Change Global Log Transaction Buffer Size (MB)Config Param Change Global Min Path MTUConfig Param Change Global PMTU TimeoutConfig Param Change Global RBA Response StateConfig Param Change Global TCP Proxy StateConfig Param Change Global TCP SYN ThresholdConfig Param Change Global Throttle RateConfig Param Change Global UDP Packets ThresholdConfig Param Change HTTP Client IP Header StateConfig Param Change HTTP Connection Multiplexing StateConfig Param Change HTTP Cookie VersionConfig Param Change HTTP Drop Invalid ReqResp StateConfig Param Change HTTP Log Error Responses StateConfig Param Change HTTP Mark Connect Requests Invalid StateConfig Param Change HTTP Mark HTTP09 Invalid StateConfig Param Change HTTP Max ConnectionsConfig Param Change HTTP Max RequestsConfig Param Change HTTP Max Reuse Pool ConnectionsConfig Param Change HTTP Secure Cookie StateConfig Param Change HTTP Server Header Insertion StateConfig Param Change License Agee StateConfig Param Change License AppFlow StateConfig Param Change License Application Firewall StateConfig Param Change License Authentication Authorization Auditing StateConfig Param Change License BGP Routing StateConfig Param Change License Cache Redirect StateConfig Param Change License Cloud Bridge Appliance StateConfig Param Change License Cloud Bridge StateConfig Param Change License Compression StateConfig Param Change License Content Filter StateConfig Param Change License Content Switching StateConfig Param Change License Delta Compression StateConfig Param Change License DOS Protection StateConfig Param Change License GSLB Proximity StateConfig Param Change License GSLB StateConfig Param Change License HTML Injection StateConfig Param Change License ICAONLY UsersConfig Param Change License Integrated Caching StateConfig Param Change License IPv6 Translation StateConfig Param Change License Load Balancing StateConfig Param Change License Model IDConfig Param Change License NSXN StateConfig Param Change License OSPF Routing StateConfig Param Change License Priority Queuing StateConfig Param Change License Push StateConfig Param Change License Responder StateConfig Param Change License Rewrite StateConfig Param Change License RIP Routing StateConfig Param Change License Routing StateConfig Param Change License SSL StateConfig Param Change License SSL VPN StateConfig Param Change License SSL VPN UsersConfig Param Change License Sure Connect StateConfig Param Change License Surge Protection StateConfig Param Change License Web Logging StateConfig Param Change License WIonNS StateConfig Param Change Mode BPDU Bridging Mode StateConfig Param Change Mode Client Keep Alive StateConfig Param Change Mode Direct Route Advertisement StateConfig Param Change Mode Edge Configuration StateConfig Param Change Mode Fast Ramp StateConfig Param Change Mode Intranet Route Advertisement StateConfig Param Change Mode IPv6 Direct Route Advertisement StateConfig Param Change Mode IPv6 Static Route Advertisement StateConfig Param Change Mode Layer 2 StateConfig Param Change Mode Layer 3 StateConfig Param Change Mode MAC-based Forwarding StateConfig Param Change Mode Path MTU Discovery StateConfig Param Change Mode Static Route Advertisement StateConfig Param Change Mode TCP Buffering StateConfig Param Change Mode Use Source IP StateConfig Param Change Mode Use Subnet IP StateConfig Param Change TCP ACK Push StateConfig Param Change TCP Buffering Memory LimitConfig Param Change TCP Connection Buffer SizeConfig Param Change TCP Delayed Acknowledgement TimeoutConfig Param Change TCP Initial CWndConfig Param Change TCP Limited Persist StateConfig Param Change TCP Max Burst FactorConfig Param Change TCP Max Packets Per MSSConfig Param Change TCP Max Server ProbesConfig Param Change TCP Max SYN HoldConfig Param Change TCP Max SYN Hold Per ProbeConfig Param Change TCP Max Time Wait ConnectionConfig Param Change TCP Min RTOConfig Param Change TCP MSS Learn DelayConfig Param Change TCP MSS Learn IntervalConfig Param Change TCP Nagle StateConfig Param Change TCP Out-of-Order Packet SizeConfig Param Change TCP Partial ACK Max Packets RetransmittedConfig Param Change TCP RST Services Switch StateConfig Param Change TCP SACK StateConfig Param Change TCP Slow Start Increment FactorConfig Param Change TCP Syn Hold Fast GiveupConfig Param Change TCP Virtual Server MSS Learning StateConfig Param Change TCP Window Scaling FactorConfig Param Change TCP Window Scaling StateConfig Param Change Timeout ANY Client Idle TimeConfig Param Change Timeout ANY Server Idle TimeConfig Param Change Timeout Client Idle TimeConfig Param Change Timeout Half-closed Connection TimeConfig Param Change Timeout HTTP Client Idle TimeConfig Param Change Timeout HTTP Server Idle TimeConfig Param Change Timeout NonTCP Zombie CleanupConfig Param Change Timeout Server Idle TimeConfig Param Change Timeout TCP Client Idle TimeConfig Param Change Timeout TCP Server Idle TimeConfig Param Change Timeout Zombie CleanupConfig Param Change VLAN Subnet NSVLANConfig Param Change VLAN Tagged Interfaces StateDisk - /flash Available (MB)Disk - /flash Size (MB)Disk - /flash Used (%)Disk - /flash Used (MB)Disk - /var Available (MB)Disk - /var Size (MB)Disk - /var Used (%)Disk - /var Used (MB)Protocol HTTP - HTTP 1.0 Received Requests TotalProtocol HTTP - HTTP 1.0 Requests RateProtocol HTTP - HTTP 1.0 Responses RateProtocol HTTP - HTTP 1.0 Sent Responses TotalProtocol HTTP - HTTP 1.1 Received Requests TotalProtocol HTTP - HTTP 1.1 Requests RateProtocol HTTP - HTTP 1.1 Responses RateProtocol HTTP - HTTP 1.1 Sent Responses TotalProtocol HTTP - HTTP Chunked Requests RateProtocol HTTP - HTTP Chunked Requests TotalProtocol HTTP - HTTP Chunked Responses RateProtocol HTTP - HTTP Chunked Responses TotalProtocol HTTP - HTTP Content Length Field Set Requests RateProtocol HTTP - HTTP Content Length Field Set Requests TotalProtocol HTTP - HTTP Content Length Field Set Responses RateProtocol HTTP - HTTP Content Length Field Set Responses TotalProtocol HTTP - HTTP DOS Condition Triggered RateProtocol HTTP - HTTP DOS Condition Triggered TotalProtocol HTTP - HTTP DOS Priority Clients RateProtocol HTTP - HTTP DOS Priority Clients TotalProtocol HTTP - HTTP DOS Valid Cookies RateProtocol HTTP - HTTP DOS Valid Cookies TotalProtocol HTTP - HTTP Error Incomplete Headers TotalProtocol HTTP - HTTP Error Incomplete Requests RateProtocol HTTP - HTTP Error Incomplete Requests TotalProtocol HTTP - HTTP Error Incomplete Responses RateProtocol HTTP - HTTP Error Incomplete Responses TotalProtocol HTTP - HTTP Error Large Chunk Size TotalProtocol HTTP - HTTP Error Large Content TotalProtocol HTTP - HTTP Error Large Requests Content TotalProtocol HTTP - HTTP Error No Reuse Multipart RateProtocol HTTP - HTTP Error No Reuse Multipart TotalProtocol HTTP - HTTP Error Responses TotalProtocol HTTP - HTTP Error Server Busy RateProtocol HTTP - HTTP Error Server Busy Responses TotalProtocol HTTP - HTTP FIN-terminated Responses RateProtocol HTTP - HTTP FIN-terminated Responses TotalProtocol HTTP - HTTP GET Requests TotalProtocol HTTP - HTTP GETs RateProtocol HTTP - HTTP Incomplete HeadersProtocol HTTP - HTTP Incomplete Request HeadersProtocol HTTP - HTTP Incomplete Response HeadersProtocol HTTP - HTTP Large/Invalid Chunk RequestsProtocol HTTP - HTTP Large/Invalid Content-lengthProtocol HTTP - HTTP Large/Invalid MessagesProtocol HTTP - HTTP Other Methods RateProtocol HTTP - HTTP Other Requests TotalProtocol HTTP - HTTP POST RateProtocol HTTP - HTTP POST Requests TotalProtocol HTTP - HTTP Received Request Bytes RateProtocol HTTP - HTTP Received Request Bytes TotalProtocol HTTP - HTTP Received Requests TotalProtocol HTTP - HTTP Received Response Bytes RateProtocol HTTP - HTTP Received Response Bytes TotalProtocol HTTP - HTTP Requests RateProtocol HTTP - HTTP Responses RateProtocol HTTP - HTTP Sent Responses TotalProtocol HTTP - HTTP Transmitted Request Bytes RateProtocol HTTP - HTTP Transmitted Request Bytes TotalProtocol HTTP - HTTP Transmitted Response Bytes RateProtocol HTTP - HTTP Transmitted Response Bytes TotalProtocol IP - Fragments Received (Total)Protocol IP - Land-AttacksProtocol IP - Max Non-TCP ClientsProtocol IP - Packets With Bad MAC SentProtocol IP - Packets With Len > 1514 rcvdProtocol IP - Unknown ServicesProtocol IPv6 - Error Header PacketsProtocol IPv6 - Fragments Received (Total)Protocol IPv6 - Land-AttacksProtocol IPv6 - Reassembled Data Too BigProtocol IPv6 - Unsupported Next HeaderProtocol IPv6 - Zero Fragment Length ReceivedProtocol SSL - Back End Session Renegotiations SSL (Total)Protocol SSL - Back End Session Renegotiations SSLv3 (Total)Protocol SSL - Back End Session Renegotiations TLSv1 (Total)Protocol SSL - Back End Sessions (Total)Protocol SSL - Back-End Key Exchanges DH1024 RateProtocol SSL - Back-End Key Exchanges DH2048 RateProtocol SSL - Back-End Key Exchanges DH512 RateProtocol SSL - Back-End Key Exchanges RSA1024 RateProtocol SSL - Back-End Key Exchanges RSA2048 RateProtocol SSL - Back-End Key Exchanges RSA512 RateProtocol SSL - Front End Session Renegotiations SSL (Total)Protocol SSL - Front End Session Renegotiations SSLv3 (Total)Protocol SSL - Front End Session Renegotiations TLSv1 (Total)Protocol SSL - Front End Sessions (Total)Protocol SSL - Front-End Key Exchanges DH1024 RateProtocol SSL - Front-End Key Exchanges DH2048 RateProtocol SSL - Front-End Key Exchanges DH512 RateProtocol SSL - Front-End Key Exchanges RSA1024 RateProtocol SSL - Front-End Key Exchanges RSA2048 RateProtocol SSL - Front-End Key Exchanges RSA4096 RateProtocol SSL - Front-End Key Exchanges RSA512 RateProtocol SSL - Offloaded Encryptions AES (Total)Protocol SSL - Offloaded Encryptions DES (Total)Protocol SSL - Offloaded Encryptions RC4 (Total)Protocol SSL - Offloaded Key Exchanges DH (Total)Protocol SSL - Offloaded Key Exchanges RSA (Total)Protocol SSL - Offloaded Sign Operations RSA (Total)Protocol SSL - Session Hits (Total)Protocol SSL - Session Misses (Total)Protocol SSL - Session Multiplex Attempts (Total)Protocol SSL - Session Multiplex Failures (Total)Protocol SSL - Session Multiplex Successes (Total)Protocol TCP - Active Server ConnectionsProtocol TCP - All Client ConnectionsProtocol TCP - All Server ConnectionsProtocol TCP - Closing Client ConnectionsProtocol TCP - Closing Server ConnectionsProtocol TCP - Established Client ConnectionsProtocol TCP - Established Server ConnectionsProtocol TCP - Opening Client ConnectionsProtocol TCP - Opening Server ConnectionsProtocol TCP - Retransmitted Packets RuleProtocol TCP - Seq Number SYN Cookie Reject (Total)Protocol TCP - Signature SYN Cookie Reject (Total)Protocol TCP - Spare ConnectionsProtocol TCP - Surge QueueProtocol TCP - Transmitted Packets Loss Percentage (Rate)Protocol UDP - Bad Checksum Packets TotalProtocol UDP - Current Rate Threshold Exceeds TotalProtocol UDP - Current Rate Threshold TotalProtocol UDP - Received Bytes RateProtocol UDP - Received Bytes TotalProtocol UDP - Received Packets RateProtocol UDP - Received Packets TotalProtocol UDP - Transmitted Bytes RateProtocol UDP - Transmitted Bytes TotalProtocol UDP - Transmitted Packets RateProtocol UDP - Transmitted Packets TotalProtocol UDP - Unknown Service Packet Drop TotalTemperature - CPU 0 (Celsius)Temperature - CPU 1 (Celsius)Temperature - Device 0 (Celsius)Temperature - Device 1 (Celsius)Temperature - Device 2 (Celsius)Temperature - Device 3 (Celsius)Temperature - Internal (Celsius)VPN CSG Statistics - CPS Connection Failure (Total)VPN CSG Statistics - CPS Connection Success (Total)VPN CSG Statistics - ICA License Failure (Total)VPN CSG Statistics - SOCKS Client Error (Total)VPN CSG Statistics - SOCKS Connect Request Received (Total)VPN CSG Statistics - SOCKS Connect Request Sent (Total)VPN CSG Statistics - SOCKS Connect Response Received (Total)VPN CSG Statistics - SOCKS Connect Response Sent (Total)VPN CSG Statistics - SOCKS Method Request Received (Total)VPN CSG Statistics - SOCKS Method Request Sent (total)VPN CSG Statistics - SOCKS Method Response Received (Total)VPN CSG Statistics - SOCKS Method Response Sent (Total)VPN CSG Statistics - SOCKS Server Error (Total)VPN CSG Statistics - STA Connection Failure (Total)VPN CSG Statistics - STA Connection Success (Total)VPN CSG Statistics - STA Request Sent (Total)VPN CSG Statistics - STA Response Received (Total)VPN General - Backend HTTP Server Probes (Total)VPN General - Backend Non HTTP Server Probes (Total)VPN General - Backend Server Probe Successes (Total)VPN General - Client Configuration Requests (Total)VPN General - DNS Queries Resolved (Total)VPN General - File System Requests Received (Total)VPN General - Login Page Delivery Failures (Total)VPN General - Login Page Requests Received (Total)VPN General - Number Of SSL VPN Tunnels (Total)VPN General - WINS Queries Resolved (Total)VPN ICA Connections CountVPN Login Failure - IIP Disabled And MIP Disabled (Total)VPN Login Failure - IIP Failed And MIP Disabled (Total)VPN Login Success - IIP Disabled And MIP Used (Total)VPN Login Success - IIP Failed And MIP Used (Total)VPN Login Success - IIP Spillover And MIP Used (Total)Citrix NetScaler Appliance (v10.x and later)AAA - Current ICAOnly SessionsAAA - Current ICAOnly Sessions (Rate)Config Param Change Diameter Server Close PropagationConfig Param Change Feature Call Home StateConfig Param Change Feature ISIS Routing StateConfig Param Change Feature Routing StateConfig Param Change Global NATPCB Force Flush LimitConfig Param Change Global NATPCB RST Timeout StateConfig Param Change License Call Home StateConfig Param Change License Cloud Extender Appliance StateConfig Param Change License Clustering StateConfig Param Change License ISIS Routing StateConfig Param Change TCP Max SynAck RetransmissionConfig Param Change TCP Receive Buffer SizeConfig Param Change TCP SYN Attack Detection StateConfig Param Change Timeout NATPCB TCP Flow TimeConfig Param Change Timeout New Connection Idle TimeCitrix NetScaler Appliance ChannelCitrix NetScaler Channel Error Packets Received RateCitrix NetScaler Channel Error Packets Transmitted RateCitrix NetScaler Channel Inbound Packets Discarded RateCitrix NetScaler Channel Multicast Packets RateCitrix NetScaler Channel NetScaler Packets RateCitrix NetScaler Channel Outbound Packets Discarded RateCitrix NetScaler Channel Received Bytes RateCitrix NetScaler Channel Received Packets RateCitrix NetScaler Channel Rx Dropped Packets RateCitrix NetScaler Channel Transmitted Bytes RateCitrix NetScaler Channel Transmitted Packets RateCitrix NetScaler Channel TX Dropped Packets RateConfig Param Change Channel StateCitrix NetScaler Appliance IPv4Config Param Change IPv4 StateCitrix NetScaler Appliance IPv6Config Param Change IPv6 StateCitrix NetScaler Appliance Memory PoolCitrix NetScaler Device Feature Memory Usage (in %)Citrix NetScaler Appliance Network InterfaceCitrix NetScaler Interface Error Packets Received RateCitrix NetScaler Interface Error Packets Transmitted RateCitrix NetScaler Interface Inbound Packets Discarded RateCitrix NetScaler Interface Multicast Packets RateCitrix NetScaler Interface NetScaler Packets RateCitrix NetScaler Interface Outbound Packets Discarded RateCitrix NetScaler Interface Received Bytes RateCitrix NetScaler Interface Received Packets RateCitrix NetScaler Interface Rx Dropped Packets RateCitrix NetScaler Interface Transmitted Bytes RateCitrix NetScaler Interface Transmitted Packets RateCitrix NetScaler Interface TX Dropped Packets RateConfig Param Change Interface StateLB ServiceCitrix NetScaler Load Balancing Average TTFB Between NetScaler Appliance And ServerCitrix NetScaler Load Balancing Current Load On ServiceNetScaler Appliance (v10.x and later) SSL ActionSSL Action - HitsSSL Action - Reference CountSSL Action - Undef HitsNetScaler Appliance (v10.x and later) SSL PolicySSL Policy - Undef HitsNetScaler SSL PolicySSL Policy - HitsRoll-up MonitorsTasksViewsDisabled By DefaultDisabled MonitorsDisabled Rules

About

Citrix Management Pack Library

Display Name Citrix Management Pack Library
Version 1.0.32.0
Description Common definitions for Citrix Management Packs.

Top

Citrix NetScaler Appliance (v10.x and later) Discovery Library

Display Name Citrix NetScaler Appliance (v10.x and later) Discovery Library
Version 1.17.87.0
Description This management pack discovers components of Citrix NetScaler appliances (v10.x and later).
Knowledge Article
Summary

This management pack contains discoveries for Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v10.x and later) Component Library

Display Name Citrix NetScaler Appliance (v10.x and later) Component Library
Version 1.17.87.0
Description Components Library for Citrix NetScaler Appliance (v10.x and later).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v10.x and later) Monitoring Library

Display Name Citrix NetScaler Appliance (v10.x and later) Monitoring Library
Version 1.17.87.0
Description Monitoring Library for Citrix NetScaler (v10.x and later).
Knowledge Article
Summary

This management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (versions 10.x and later).

Top

Citrix NetScaler Appliance (v9.x) Discovery Library

Display Name Citrix NetScaler Appliance (v9.x) Discovery Library
Version 1.17.87.0
Description This management pack discovers components of Citrix NetScaler appliances (v9.x).
Knowledge Article
Summary

This management pack contains discoveries for Citrix NetScaler appliances (versions 9.x).

Top

Citrix NetScaler Appliance (v9.x) Component Library

Display Name Citrix NetScaler Appliance (v9.x) Component Library
Version 1.17.87.0
Description Component Library for Citrix NetScaler (v9.x).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (versions 9.x).

Top

Citrix NetScaler Device Discovery Library

Display Name Citrix NetScaler Device Discovery Library
Version 1.17.87.0
Description This management pack discovers Citrix NetScaler network devices.
Knowledge Article
Summary

This management pack contains class definitions and discoveries for Citrix NetScaler network devices. The devices are discovered as SNMP devices. They are identified according to their "System Object ID" property.

Top

Citrix NetScaler Appliance Component Library

Display Name Citrix NetScaler Appliance Component Library
Version 1.17.87.0
Description Component Library for Citrix NetScaler (all versions).
Knowledge Article
Summary

This is the core management pack for monitoring Citrix NetScaler appliances (all versions).

Top

Citrix NetScaler Module Library

Display Name Citrix NetScaler Module Library
Version 1.17.87.0
Description This management pack contains probes for Citrix NetScaler monitoring.
Knowledge Article
Summary

This management pack contains probes for Citrix NetScaler monitoring. Probes are implemented by using managed code.

Top

Citrix NetScaler Monitoring Library

Display Name Citrix NetScaler Monitoring Library
Version 1.17.87.0
Description Monitoring Library for Citrix NetScaler (all versions).
Knowledge Article
Summary

This management pack contains monitors, rules, tasks, and other objects for monitoring Citrix NetScaler appliances (all versions).

Top


Discoveries

Target Display Name Description Enabled by default Discovery interval
Citrix NetScaler Device Group Citrix NetScaler Device Group Population Discovery
Citrix NetScaler Device Group Member population Discovery.
Yes ---
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Global Settings Discovery
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Access Gateway Global Settings Discovery
Discovers Access Gateway Global Settings for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Policy Discovery
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Access Gateway Policy Discovery
Discovers Access Gateway Policy for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Access Gateway Virtual Server For NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Access Gateway Virtual Server Authentication Policy Relationship Discovery
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Access Gateway Virtual Server Citrix NetScaler Appliance (v9.x) Access Gateway Virtual Server Authentication Policy Relationship Discovery
Discovers Access Gateway Virtual Server Authentication Policy Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) BridgeGroup Discovery
Discovers BridgeGroup for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) BridgeGroup Discovery
Discovers BridgeGroup for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Bridge Group Citrix NetScaler Appliance (v10.x and later) BridgeGroup Relationships Discovery
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Bridge Group Citrix NetScaler Appliance (v9.x) BridgeGroup Relationships Discovery
Discovers BridgeGroup Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server CERT Discovery
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server CERT Discovery
Discovers CERT Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Certificate Discovery
Discovers Certificate for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Certificate Discovery
Discovers Certificate for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Channel Discovery
Discovers Channels for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Channel Discovery
Discovers Channels for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) SCOM Data Splitter Discovery
Discovers Citrix NetScaler Appliance (v10.x and later) SCOM Data Splitter.
Yes 14400 sec
Citrix NetScaler Network Device Citrix NetScaler Appliance Discovery (v10.x and later)
Discovers Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) SCOM Data Splitter Discovery
Discovers Citrix NetScaler Appliance (v9.x) SCOM Data Splitter.
Yes 14400 sec
Citrix NetScaler Network Device Citrix NetScaler Appliance (v9.x) Discovery
Discovers Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Node Citrix NetScaler Device Discovery
Discovers Citrix NetScaler Device using SNMP from Network device list.
Yes 14400 sec
Windows Server Citrix MPNS Agent Service Discovery
Discovers Citrix NetScaler MP Agent used for monitoring Citrix NetScaler appliance.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Interface Discovery
Discovers Interfaces for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Interface Discovery
Discovers Interfaces for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) IP Version 4 Discovery
Discovers IP Version 4 for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) IP Version 4 Discovery
Discovers IP Version 4 for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) IP Version 6 Discovery
Discovers IP Version 6 for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) IP Version 6 Discovery
Discovers IP Version 6 for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server LDAP Discovery
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server LDAP Discovery
Discovers LDAP Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Discovery
Discovers load balance service for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) Load Balancing Service Discovery
Discovers load balance service for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Service Group Discovery
Discovers load balance service group for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) Load Balancing Service Group Discovery
Discovers load balance service group for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Discovery
Discovers load balance virtual server for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Discovery
Discovers load balance virtual server for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
Windows Computer Citrix Computer Discovery
Discovers managed nodes with Citrix software installed on it.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Memory Feature Discovery
Discovers Memory Pools for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Memory Feature Discovery
Discovers Memory Pools for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server Negotiate Discovery
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server Negotiate Discovery
Discovers Negotiate Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) NetBridge Discovery
Discovers NetBridge for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) NetBridge Discovery
Discovers NetBridge for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Network Bridge Citrix NetScaler Appliance (v10.x and later) NetBridge Relationships Discovery
Discovers NetBridge Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Network Bridge Citrix NetScaler Appliance (v9.x) NetBridge Relationship Discovery
Discovers NetBridge Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Policy Discovery
Discovers Policies for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Policy Discovery
Discovers Policies for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Policy Action Discovery
Discovers Policy Actions for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Policy Action Discovery
Discovers Policy Actions for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server Radius Discovery
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server Radius Discovery
Discovers Radius Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Discovery
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Discovery
Discovers relationship between load balancing virtual server and service for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Load Balancing Virtual Server Bind Service Group Discovery
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance (v10.x and later).
Yes 14400 sec
NetScaler Discovery Data Splitter For Appliance v9.x. Citrix NetScaler Appliance (v9.x) Load Balancing Virtual Server Bind Service Group Discovery
Discovers relationship between load balancing virtual server and service group for the Citrix NetScaler appliance v9.x.
Yes 14400 sec
NetScaler Appliance (v10.x and later) SSL Action Citrix NetScaler Appliance (v10.x and later) SSL Policy - Action Relationship Discovery
Discovers relationship between SSL Policy and SSL Policy Action objects.
Yes 14400 sec
NetScaler Appliance v9.x SSL Action Citrix NetScaler Appliance (v9.x) SSL Policy - Action Relationship Discovery
Discovers relationship between SSL Policy and SSL Policy Action objects.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server SAML Discovery
Discovers SAML Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Settings Discovery
Discovers Settings for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Settings Discovery
Discovers Settings for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Authentication Server TACACS Discovery
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Authentication Server TACACS Discovery
Discovers TACACS Authentication Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) Virtual LAN Discovery
Discovers Virtual LAN for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) Virtual LAN Discovery
Discovers Virtual LAN for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Virtual LAN Citrix NetScaler Appliance (v10.x and later) VLAN Relationships Discovery
Discovers VLAN Relationships for a Citrix NetScaler Appliance (v10.x and later).
Yes 14400 sec
Citrix NetScaler Appliance v9.x Virtual LAN Citrix NetScaler Appliance (v9.x) VLAN Relationship Discovery
Discovers VLAN Relationships for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliance (v10.x and later) Citrix NetScaler Appliance (v10.x and later) VPN Virtual Server Discovery
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v10.x and later.
Yes 14400 sec
Citrix NetScaler Appliance v9.x Citrix NetScaler Appliance (v9.x) VPN Virtual Server Discovery
Discovers VPN Virtual Server for a Citrix NetScaler Appliance v9.x.
Yes 14400 sec
Citrix NetScaler Appliances Populate Citrix NetScaler Appliance Root With Appliance
Makes containment relationships between the "Citrix NetScaler Appliance" and the "Citrix Appliance Root" objects.
Yes ---
Citrix Management Populate Citrix NetScaler Root Object
Makes hosting relationships between the "Citrix NetScaler Appliances" and the "Citrix Management" object.
Yes ---
All NetScaler Service Groups Populate All Load Balancing Service Groups Group
Populates a group with all load balancing service groups.
Yes ---
All NetScaler Services Populate All Load Balancing Service Group
Populates a group with all load balancing service.
Yes ---
All Load Balance Virtual Servers Populate All Load Balancing Virtual Server Group
Populates a group with all load balancing virtual server.
Yes ---

Monitors

Citrix NetScaler Access Gateway Virtual Server

Access Gateway Virtual Server - Availability State Monitor

Display Name Access Gateway Virtual Server - Availability State Monitor
Description
Monitors state of a Citrix NetScaler access gateway virtual server.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Access Gateway Virtual Server.

This monitor is enabled by default.

Virtual servers on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests. DOWN status indicates configuration problems (example: SSL Offload disabled or no SSL certificate bound to the virtual server).

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Access Gateway Virtual Server - Availability State Monitor
Alert Message
Access Gateway Virtual Server {0} on {1} device has state: {2}.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0

Top

Access Gateway Virtual Server - Current Users Percentage

Display Name Access Gateway Virtual Server - Current Users Percentage
Description
Percentage of Current Users in relation to Maximum Users that can be logged in.
Knowledge Article
Summary

This monitor checks percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server.

This monitor is enabled by default.

Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values.

The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for current users percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for current users percentage. Default value is 95.

Alert Name Access Gateway Virtual Server - Current Users Percentage
Alert Message
                        Current users percentage on Access Gateway Virtual Server named {0} on {1} device is {2}.

                        Max Users: {3}
                        Current Users: {4}
                    
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor
Description
Monitors change of total number of request bytes received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of request bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Request Bytes Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) request bytes received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Requests Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Requests Total No Change Performance Monitor
Description
Monitors change of total number of requests received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of requests received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Requests Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) requests received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor
Description
Monitors change of total number of response bytes received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of response bytes received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Response Bytes Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) response bytes received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Access Gateway Virtual Server - Responses Total No Change Performance Monitor

Display Name Access Gateway Virtual Server - Responses Total No Change Performance Monitor
Description
Monitors change of total number of responses received on a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor detects change of the total number of responses received on the service or virtual server. If there is no change the warning state is reported and an alert is issued.

(This applies to HTTP/SSL services and servers.)

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Access Gateway Virtual Server - Responses Total No Change Performance Monitor
Alert Message
Total number of (HTTP/SSL) responses received by access gateway virtual server {0} on  NetScaler device {1} did not change for a while.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

VPN Server Requests Rate Performance Monitor

Display Name VPN Server Requests Rate Performance Monitor
Description
Monitors requests rate of a Citrix NetScaler VPN (virtual) server.
Knowledge Article
Summary

This monitor checks the total number of requests received on a Citrix NetScaler VPN (virtual) server.

Total number of requests received on this service or virtual server.

(This applies to HTTP/SSL services and servers.).

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name VPN Server Requests Rate Performance Monitor
Alert Message
VPN server {0} on {1} device has requests rate: {2}.
Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 900
CriticalThreshold 1000
CacheExpirationFactor 1

Top

Citrix NetScaler Appliance

AAA - Authentication Failure Ratio

Display Name AAA - Authentication Failure Ratio
Description
Percentage of authentication failures in relation to total number of authentication attempts.
Knowledge Article
Summary

This monitor checks percentages of authentication failures in relation to total number of authentication attempts.

This monitor is enabled by default.

"Authentication Failure Ratio" is calculated using "Authentication successes" and "Authentication failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Authentication failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for Authentication failure ratio (in percentages). Default value is 95.

Alert Name AAA - Authentication Failure Ratio
Alert Message
                        Current Authentication Failure Ratio (in percentages) on {0} device is {1}.

                        Authentication successes: {2}
                        Authentication failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Authentication Failures

Display Name AAA - Authentication Failures
Description
Number of authentication failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of authentication failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of authentication failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Authentication failures
Alert Message
Number of authentication failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current AAA Sessions Drop

Display Name AAA - Current AAA Sessions Drop
Description
Monitors drop in number of current AAA sessions during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks for drop in the number of current AAA sessions during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for drop in number of current AAA sessions during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Current AAA sessions drop
Alert Message
                        Number of AAA sessions on {0} appliance is decreased by more than predefined threshold.

                        Delta value: {1}
                        Current number of AAA sessions: {2}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current AAA Sessions Minimum

Display Name AAA - Current AAA Sessions Minimum
Description
Monitors if number of current AAA sessions is below minimum specified by Threshold parameter.
Knowledge Article
Summary

This monitor checks if number of current AAA sessions is below minimum specified by Threshold parameter.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Minimum number of current AAA sessions. If lower, monitor goes into warning state. Default value is 5.

Alert Name AAA - Current AAA sessions minimum
Alert Message
                        Number of current AAA sessions on {0} appliance is below minimum specified by Threshold parameter.

                        Current AAA sessions: {1}
                    
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5

Top

AAA - HTTP Authorization Failure Ratio

Display Name AAA - HTTP Authorization Failure Ratio
Description
Percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts.
Knowledge Article
Summary

This monitor checks percentage of HTTP connections with failed authorization in relation to total number of HTTP connections authorization attempts.

This monitor is enabled by default.

"HTTP Authorization Failure Ratio" is calculated using "HTTP authorization successes" and "HTTP authorization failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for HTTP authorization failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for HTTP authorization failure ratio (in percentages). Default value is 95.

Alert Name AAA - HTTP Authorization Failure Ratio
Alert Message
                        Current HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}.

                        HTTP Authorization successes: {2}
                        HTTP Authorization failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - HTTP Authorization Failures

Display Name AAA - HTTP Authorization Failures
Description
Number of HTTP authorization failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of HTTP authorization failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of HTTP authorization failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - HTTP authorization failures
Alert Message
Number of HTTP authorization failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Non HTTP Authorization Failure Ratio

Display Name AAA - Non HTTP Authorization Failure Ratio
Description
Percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts.
Knowledge Article
Summary

This monitor checks percentage of Non HTTP connections with failed authorization in relation to total number of Non HTTP connections authorization attempts.

This monitor is enabled by default.

"Non HTTP Authorization Failure Ratio" is calculated using "Non HTTP authorization successes" and "Non HTTP authorization failures" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Non HTTP authorization failure ratio (in percentages). Default value is 80.

  • CriticalThreshold - Critical threshold for Non HTTP authorization failure ratio (in percentages). Default value is 95.

Alert Name AAA - Non HTTP Authorization Failure Ratio
Alert Message
                        Current Non HTTP Authorization Failure Ratio (in percentages) on {0} device is {1}.

                        Non HTTP Authorization successes: {2}
                        Non HTTP Authorization failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

AAA - Non HTTP Authorization Failures

Display Name AAA - Non HTTP Authorization Failures
Description
Number of non HTTP authorization failures during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of non HTTP authorization failures that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of non HTTP authorization failures that occurred during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Non HTTP authorization failures
Alert Message
Number of non HTTP authorization failures on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage

Display Name Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage
Description
Percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures).
Knowledge Article
Summary

This monitor checks percentage of CPS Connection Failures in relation to total number of CPS Connection attempts (successful and failures).

This monitor is enabled by default.

"STA connection failure percentage" is calculated using "CPS connection failure" and "CPS connection success" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for CPS connection failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for CPS connection failure percentage. Default value is 95.

Alert Name Access Gateway VPN CSG Statistics - CPS Connection Failure Percentage
Alert Message
                        Current CPS Connection Failure Percentage on {0} device is {1}.

                        CPS connection successes: {2}
                        CPS connection failure: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN CSG Statistics - SOCKS Client Errors

Display Name Access Gateway VPN CSG Statistics - SOCKS Client Errors
Description
SOCKS client errors that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of SOCKS client errors occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of SOCKS client errors occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN CSG Statistics - SOCKS client errors
Alert Message
Number of recent SOCKS client errors on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN CSG Statistics - SOCKS Server Errors

Display Name Access Gateway VPN CSG Statistics - SOCKS Server Errors
Description
SOCKS server errors that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of SOCKS server errors occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of SOCKS server errors occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN CSG Statistics - SOCKS server errors
Alert Message
Number of recent SOCKS server errors on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN CSG Statistics - STA Connection Failure Percentage

Display Name Access Gateway VPN CSG Statistics - STA Connection Failure Percentage
Description
Percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures).
Knowledge Article
Summary

This monitor checks percentage of STA Connection Failures in relation to total number of STA Connection attempts (successful and failures).

This monitor is enabled by default.

"STA connection failure percentage" is calculated using "STA connection failure" and "STA connection success" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for STA connection failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for STA connection failure percentage. Default value is 95.

Alert Name Access Gateway VPN CSG Statistics - STA Connection Failure Percentage
Alert Message
                        Current STA Connection Failure Percentage on {0} device is {1}.

                        STA connection successes: {2}
                        STA connection failure: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN General - Login-page Delivery Failure Percentage

Display Name Access Gateway VPN General - Login-page Delivery Failure Percentage
Description
Percentage of Login-page Delivery Failures in relation to total number of Login-page requests received.
Knowledge Article
Summary

This monitor checks percentage of Login-page Delivery Failures in relation to total number of Login-page requests received.

This monitor is enabled by default.

"Login-page delivery failure percentage" is calculated using "Login-page delivery failures" and "Login-page requests received" values.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for Login-page delivery failure percentage. Default value is 80.

  • CriticalThreshold - Critical threshold for Login-page delivery failure percentage. Default value is 95.

Alert Name Access Gateway VPN General - Login-page Delivery Failure Percentage
Alert Message
                        Current Login-page Delivery Failure Percentage on {0} device is {1}.

                        Login-page requests received: {2}
                        Login-page delivery failures: {3}
                    
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 80
CriticalThreshold 95
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled

Display Name Access Gateway VPN Login Failure - IIP Disabled And MIP Disabled
Description
Login Failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login failures where both IIP and MIP were disabled that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login failures occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Failure - IIP disabled and MIP disabled
Alert Message
Number of recent login failures where both IIP and MIP were disabled on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Failure - IIP Failed And MIP Disabled

Display Name Access Gateway VPN Login Failure - IIP Failed And MIP Disabled
Description
Login Failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login failures where IIP failed and MIP was disabled that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login failures occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Failure - IIP failed and MIP disabled
Alert Message
Number of recent login failures where IIP failed and MIP was disabled on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Disabled And MIP Used

Display Name Access Gateway VPN Login Success - IIP Disabled And MIP Used
Description
Login Successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP was disabled and MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP disabled and MIP used
Alert Message
Number of recent login successes where IIP was disabled and MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Failed And MIP Used

Display Name Access Gateway VPN Login Success - IIP Failed And MIP Used
Description
Login Successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP failed and MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP failed and MIP used
Alert Message
Number of recent login successes where IIP failed and MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Access Gateway VPN Login Success - IIP Spillover And MIP Used

Display Name Access Gateway VPN Login Success - IIP Spillover And MIP Used
Description
Login Successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks number of login successes where IIP spillover to MIP was used that occurred during IntervalSeconds period of time.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of login successes that occurred during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Access Gateway VPN Login Success - IIP spillover and MIP used
Alert Message
Number of recent login successes where IIP spillover to MIP was used on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Appliance Monitoring Availability

Display Name Appliance Monitoring Availability
Description
Checks appliance URL availability for monitoring.
Knowledge Article
Summary

This monitor checks the appliance availability for monitoring.

Appliance is available for monitoring if access to the appliance using NITRO API is success.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name NetScaler Appliance Availability
Alert Message
NetScaler appliance "{0}" is inaccessible.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Citrix NetScaler CPU Usage

Display Name Citrix NetScaler CPU Usage
Description
Monitors NetScaler CPU utilization percentage.
Knowledge Article
Summary

This monitor checks the percentage of CPU utilization.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

  • WarningThreshold - Warning threshold value in percent. Default value is 92.

  • CriticalThreshold - Critical threshold value in percent. Default value is 98.

Alert Name Citrix NetScaler CPU Usage
Alert Message
Device {0} has CPU utilization of {1} percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 92
CriticalThreshold 98
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler Flash Disk Partition Percentage Usage

Display Name Citrix NetScaler Flash Disk Partition Percentage Usage
Description
Monitors percentage of /flash disk partition utilization on NetScaler.
Knowledge Article
Summary

This monitor checks used space in /flash partition of the disk, as a percentage.

This is a critical counter.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Flash Disk Partition Percentage Usage
Alert Message
Device {0} has /flash disk partition usage {1}  percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler Global Memory Percentage Usage

Display Name Citrix NetScaler Global Memory Percentage Usage
Description
Monitors percentage of global memory utilization on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of global memory utilization on NetScaler.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Global Memory Percentage Usage
Alert Message
Global memory usage on  {0} device is {1} percents.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Citrix NetScaler TCP SYN Packets Received Rate Usage

Display Name Citrix NetScaler TCP SYN Packets Received Rate Usage
Description
Monitors the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state.
Knowledge Article
Summary

This monitor checks the rate of TCP SYN packets received on a connection that is in the SYN_RCVD state.

A connection goes into the SYN_RCVD state after receiving a SYN packet.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of TCP SYN packets received. Default value is 1000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler TCP SYN Packets Received Rate Usage
Alert Message
Device {0} has TCP SYN packets received rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 1000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage

Display Name Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage
Description
Monitors percentage of TCP transmitted packets rate against retransmitted packets rate on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of TCP packets loss rate.

For a comparison, reference and current trends, refer to the TCP Transmission Packets Loss Rate Percentage and TCP Retransmitted Packets rules.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - The percentage of TCP loss rate. Default value is 5.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler TCP Transmitted Packets Loss Rate Percentage Usage
Alert Message
Device {0} has TCP loss packets rate {1} percents.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler UDP Packets Received Rate Usage

Display Name Citrix NetScaler UDP Packets Received Rate Usage
Description
Monitors the rate of UDP packets received.
Knowledge Article
Summary

This monitor checks the rate of UDP packets received.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of UDP packets received. Default value is 10000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler UDP Packets Received Rate Usage
Alert Message
NetScaler appliance {0} has UDP packets received rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler UDP Packets Transmitted Rate Usage

Display Name Citrix NetScaler UDP Packets Transmitted Rate Usage
Description
Monitors the rate of UDP packets transmitted.
Knowledge Article
Summary

This monitor checks the rate of UDP packets transmitted.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Total number of UDP packets transmitted. Default value is 10000.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

Alert Name Citrix NetScaler UDP Packets Transmitted Rate Usage
Alert Message
Device {0} has UDP packets transmitted rate {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10000
Direction GreaterEqual
NumberOfSamples 2

Top

Citrix NetScaler var Disk Partition Percentage Usage

Display Name Citrix NetScaler var Disk Partition Percentage Usage
Description
Monitors percentage of /var disk partition utilization on NetScaler.
Knowledge Article
Summary

This monitor checks used space in /var partition of the disk, as a percentage.

This is a critical counter.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler var Disk Partition Percentage Usage
Alert Message
Device {0} has /var disk partition usage {1}  percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 80
CriticalThreshold 95
NumberOfSamples 2
CacheExpirationFactor 1

Top

Fan Speed (RPM) - 0

Display Name Fan Speed (RPM) - 0
Description
Speed of Fan 0 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 0 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 0
Alert Message
Fan 0 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 1

Display Name Fan Speed (RPM) - 1
Description
Speed of Fan 1 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 1 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 1
Alert Message
Fan 1 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 2

Display Name Fan Speed (RPM) - 2
Description
Speed of Fan 2 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 2 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 2 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 2
Alert Message
Fan 2 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - 3

Display Name Fan Speed (RPM) - 3
Description
Speed of Fan 3 if associated pin is connected to health monitoring chip.
Knowledge Article
Summary

This monitor checks the speed (RPM) of Fan 3 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Speed of Fan 3 if associated pin is connected to health monitoring chip.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - 3
Alert Message
Fan 3 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - CPU 0

Display Name Fan Speed (RPM) - CPU 0
Description
CPU Fan 0 speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of CPU Fan 0 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. CPU Fan 0 Speed is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - CPU 0
Alert Message
CPU 0 fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - CPU 1

Display Name Fan Speed (RPM) - CPU 1
Description
CPU Fan 1 speed. Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU fan 0. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of CPU Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. 7000 platform displays speed of CPU Fan 0. CPU Fan 1 is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - CPU 1
Alert Message
CPU 1 fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System

Display Name Fan Speed (RPM) - System
Description
System fan speed. Acceptable range is 3000 through 6000 RPM. This is a critical counter.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Acceptable range is 3000 through 6000 RPM. System Fan Speed is a critical counter.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System
Alert Message
System fan speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System 1

Display Name Fan Speed (RPM) - System 1
Description
System fan 1 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan 1 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System 1
Alert Message
System fan 1 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

Fan Speed (RPM) - System 2

Display Name Fan Speed (RPM) - System 2
Description
System fan 2 speed. For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.
Knowledge Article
Summary

This monitor checks the speed (RPM) of System Fan 2 on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

For new platforms associated pin is connected to CPU supporting fans. For platforms in which it is not connected, it will point to System Fan.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold fan speed value. Default value is 3000.

  • CriticalThreshold - Critical threshold fan speed value. Default value is 1000.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Fan Speed (RPM) - System 2
Alert Message
System fan 2 speed on {0} device is {1} RPM.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 3000
CriticalThreshold 1000
CacheExpirationFactor 0

Top

High Availability Node - Master State

Display Name High Availability Node - Master State
Description
Checks current master state for NetScaler appliance node.
Knowledge Article
Summary

This monitor checks current master state for the appliance node in context of high availability.

Warning alert is generated whenever "Master State" parameter value is other than "Primary".

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name High Availability Node - Master State
Alert Message
Node master state for NetScaler appliance "{0}" has changed to "{1}".
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

nCore Consistency

Display Name nCore Consistency
Description
Monitors nCore consistency for the appliance.
Knowledge Article
Summary

This monitor checks nCore consistency for the appliance.

The nCore NetScaler uses multiple CPU cores for packet handling, which greatly improves the performance of many NetScaler features.

You can determine your NetScaler build type by looking at the build information on the banner of the NetScaler Graphical User Interface (GUI), or by issuing the "show version" command at the command line. The file extension indicates the build type. In the GUI, an nCore NetScaler has a ".nc" extension. On the command line, the tar file name for an nCore NetScaler contains "_nc".

This rule is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name nCore Consistency
Alert Message
Core {0} on {1} appliance is not consistent.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Power Supply 1 Status

Display Name Power Supply 1 Status
Description
Monitors Power Supply 1 status for the appliance.
Knowledge Article
Summary

This monitor checks the Power Supply 1 status.

On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC.

NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit.

Power Supply status can be one of the four:

  • NORMAL

  • FAILED

  • NOT PRESENT

  • NOT SUPPORTED

The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances.

NORMAL and NOT SUPPORTED are "Healthy" statuses.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Power Supply 1 Status
Alert Message
Power Supply 1 on {0} appliance has status: {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 0

Top

Power Supply 2 Status

Display Name Power Supply 2 Status
Description
Monitors Power Supply 2 status for the appliance.
Knowledge Article
Summary

This monitor checks the Power Supply 2 status.

On a NetScaler MPX 7500 or NetScaler MPX 9500 appliance, you can install two power supply units. However, the appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. You must ensure that both power supply units are of the same type, either AC or DC.

NetScaler MPX 7500 appliances manufactured before February 2010 do not support the health monitoring of the second power supply unit.

Power Supply status can be one of the four:

  • NORMAL

  • FAILED

  • NOT PRESENT

  • NOT SUPPORTED

The status NOT SUPPORTED is added to distinguish the NetScaler MPX 7500 appliances with hardware that does not support the health monitoring of the power supply units from newly manufactured appliances.

NORMAL and NOT SUPPORTED are "Healthy" statuses.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Power Supply 2 Status
Alert Message
Power Supply 2 on {0} appliance has status: {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Error Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 0

Top

Protocol IP - Address Lookups Failure Percentage

Display Name Protocol IP - Address Lookups Failure Percentage
Description
Monitors percentage of IP address lookups that failed on NetScaler.
Knowledge Article
Summary

This monitor checks the percentage of IPv4 Address Lookups Failure on NetScaler.

When a packet is received on a non-established session, the NetScaler checks if the destination IP address is one of the NetScaler owned IP addresses. This monitor shows percentage of IP lookups that have failed because the destination IP address of the packet does not match any of the NetScaler owned IP addresses.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold value for IP address lookups failure percentage. Default value is 10.

  • CriticalThreshold - Critical threshold value for IP address lookups failure percentage. Default value is 20.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Protocol IP - Address Lookups Failure Percentage
Alert Message
IP Address Lookups Failure on {0} device is {1} percents.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
WarningThreshold 10
CriticalThreshold 20
NumberOfSamples 2
CacheExpirationFactor 1

Top

Protocol IP - Land-Attacks

Display Name Protocol IP - Land-Attacks
Description
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.
Knowledge Article
Summary

This monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of land-attack packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Land-Attacks
Alert Message
Number of packets received where source and destination addresses are the same on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Max Non-TCP Clients

Display Name Protocol IP - Max Non-TCP Clients
Description
Attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded.
Knowledge Article
Summary

This monitor checks number of attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of attempts during IntervalSeconds period of time to open a new connection to a service for which the maximum limit has been exceeded. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Max Non-TCP Clients
Alert Message
Number of attempts to open a new connection to a service for which the maximum limit has been exceeded on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Packets With Bad MAC Sent

Display Name Protocol IP - Packets With Bad MAC Sent
Description
IP packets during IntervalSeconds period of time transmitted with a bad MAC address.
Knowledge Article
Summary

This monitor checks number of IP packets transmitted with a bad MAC address during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of IP packets transmitted with a bad MAC address during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Packets With Bad MAC Sent
Alert Message
Number of packets transmitted with a bad MAC address on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Packets With MTU Length Greater Than 1514 Bytes

Display Name Protocol IP - Packets With MTU Length Greater Than 1514 Bytes
Description
Packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes.
Knowledge Article
Summary

This monitor checks number of IP packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of IP packets received during IntervalSeconds period of time with a length greater than the normal maximum transmission unit of 1514 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Packets With Len > 1514 rcvd
Alert Message
Number of packets received with a length greater than the normal maximum transmission unit of 1514 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IP - Unknown Services

Display Name Protocol IP - Unknown Services
Description
Packets received during IntervalSeconds period of time on a port or service that is not configured.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time on a port or service that is not configured.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time on a port or service that is not configured. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IP - Unknown Services
Alert Message
Number of Unknown Services packets received on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Error Header Packets

Display Name Protocol IPv6 - Error Header Packets
Description
Packets received during IntervalSeconds period of time that contain an error in one or more components of the IPv6 header.
Knowledge Article
Summary

This monitor checks number of error header packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of error header packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Error Header Packets
Alert Message
Number of packets received that contain an error in one or more components of the IPv6 header on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Land-Attacks

Display Name Protocol IPv6 - Land-Attacks
Description
Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.
Knowledge Article
Summary

This monitor checks number of Land-attack packets received during IntervalSeconds period of time. The source and destination addresses are the same.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of land-attack packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Land-Attacks
Alert Message
Number of packets received where source and destination addresses are the same on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Reassembled Data Too Big

Display Name Protocol IPv6 - Reassembled Data Too Big
Description
Packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Reassembled Data Too Big
Alert Message
Number of packets received for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Unsupported Next Header

Display Name Protocol IPv6 - Unsupported Next Header
Description
Packets received during IntervalSeconds period of time that contain an unsupported next header. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT.
Knowledge Article
Summary

This monitor checks number of unsupported next header packets received during IntervalSeconds period of time. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of unsupported next header packets received during IntervalSeconds period of time. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Unsupported Next Header
Alert Message
Number of packets received that contain an unsupported next header on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol IPv6 - Zero Fragment Length Received

Display Name Protocol IPv6 - Zero Fragment Length Received
Description
Packets received during IntervalSeconds period of time with a fragment length of 0 bytes.
Knowledge Article
Summary

This monitor checks number of packets received during IntervalSeconds period of time with a fragment length of 0 bytes.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is Greater.

  • Threshold - Threshold value for number of packets received during IntervalSeconds period of time with a fragment length of 0 bytes. Default value is 100.

  • NumberOfSamples - Number of sample values considered before reporting unsuccessful state. Default value is 2.

Alert Name Protocol IPv6 - Zero Fragment Length Received
Alert Message
Number of packets received with a fragment length of 0 bytes on {0} device is {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction greater
NumberOfSamples 2

Top

Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DH authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DH authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations DH Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end DH authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DSS authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DSS authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations DSS Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end DSS authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end null authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations Null Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end null authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Authorizations RSA Authentications Total No Change Performance Monitor
Alert Message
Total number of back-end RSA authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end null cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of back-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSLv3 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Client Authentications SSLv3 Total No Change Performance Monitor
Alert Message
Total number of back-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end TLSv1 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Client Authentications TLSv1 Total No Change Performance Monitor
Alert Message
Total number of back-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSLv3 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Handshakes SSLv3 Total No Change Performance Monitor
Alert Message
Total number of back-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end TLSv1 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Handshakes TLSv1 Total No Change Performance Monitor
Alert Message
Total number of back-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Hashes MD5 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end MD5 hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End MD5 Hashes Total No Change Performance Monitor
Alert Message
Total number of back-end MD5 hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Hashes SHA Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SHA hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End SHA Hashes Total No Change Performance Monitor
Alert Message
Total number of back-end SHA hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate
Description
Monitors the number of back-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH1024 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH1024 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate
Description
Monitors the number of back-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH2048 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH2048 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate
Description
Monitors the number of back-end DH 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges DH512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH512 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end DH 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges DH512 Total No Change Performance Monitor
Alert Message
Total number of back-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate
Description
Monitors the number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA1024 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA1024 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate
Description
Monitors the number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA2048 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA2048 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate

Display Name Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate
Description
Monitors the number of back-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of back-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Back-End Key Exchanges RSA512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA512 Threshold Rate
Alert Message
NetScaler appliance {0} has back-end RSA 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor
Description
Monitors change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Key Exchanges RSA512 Total No Change Performance Monitor
Alert Message
Total number of back-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Back-End Sessions Total No Change Performance Monitor

Display Name Protocol SSL - Back-End Sessions Total No Change Performance Monitor
Description
Monitors change of the total number of back-end SSL sessions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of back-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Back-End Sessions Total No Change Performance Monitor
Alert Message
Total number of back-end SSL sessions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations DH Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DSS authorization is used on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DSS authorization is used on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations DSS Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end DSS authorization is used on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end null authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end null authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations Null Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end null authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Authorizations RSA Authentications Total No Change Performance Monitor
Alert Message
Total number of front-end RSA authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated 3DES 168-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 168-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated AES 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end AES 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated AES 256-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end AES 256-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated DES 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated DES 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end DES 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated Null Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end null cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end null cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Null Ciphers Negotiated Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end null cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC2 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC2 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 128-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 128-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 40-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 40-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 56-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 56-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Ciphers Negotiated RC4 64-bit Encryption Total No Change Performance Monitor
Alert Message
Total number of front-end RC4 64-bit cipher encryptions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv2 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv2 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications SSLv2 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv2 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv3 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv3 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications SSLv3 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv3 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end TLSv1 client authentications on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end TLSv1 client authentications on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Client Authentications TLSv1 Total No Change Performance Monitor
Alert Message
Total number of front-end TLSv1 client authentications on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv2 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv2 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes SSLv2 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv2 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSLv3 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSLv3 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes SSLv3 Total No Change Performance Monitor
Alert Message
Total number of front-end SSLv3 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end TLSv1 handshakes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end TLSv1 handshakes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Handshakes TLSv1 Total No Change Performance Monitor
Alert Message
Total number of front-end TLSv1 handshakes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Hashes MD5 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end MD5 hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end MD5 hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End MD5 Hashes Total No Change Performance Monitor
Alert Message
Total number of front-end MD5 hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Hashes SHA Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SHA hashes on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SHA hashes on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End SHA Hashes Total No Change Performance Monitor
Alert Message
Total number of front-end SHA hashes on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate
Description
Monitors the number of front-end DH 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH1024 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH1024 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate
Description
Monitors the number of front-end DH 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH2048 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH2048 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate
Description
Monitors the number of front-end DH 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end DH 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges DH512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH512 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end DH 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges DH512 Total No Change Performance Monitor
Alert Message
Total number of front-end Diffie-Helman 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate
Description
Monitors the number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA1024 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA1024 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 1024-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA1024 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 1024-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate
Description
Monitors the number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA2048 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA2048 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 2048-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA2048 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 2048-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate
Description
Monitors the number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA4096 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA4096 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 4096-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA4096 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 4096-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate

Display Name Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate
Description
Monitors the number of front-end RSA 512-bit key exchanges on the NetScaler appliance. (Rate)
Knowledge Article
Summary

This monitor checks the rate of front-end RSA 512-bit key exchanges on the NetScaler appliance. If the collected value exceeds the threshold value for the specified number of sample times consecutively, the warning state is triggered.

Refer to "Protocol SSL - Front-End Key Exchanges RSA512 Rate" performance rule.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Threshold - Number of key exchanges. Default value is 100.

  • Direction - GreaterEqual, Greater, Equal, Less, LessEqual. Default value is GreaterEqual.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA512 Threshold Rate
Alert Message
NetScaler appliance {0} has front-end RSA 512-bit key exchanges rate = {1}.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100
Direction GreaterEqual
NumberOfSamples 2

Top

Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor
Description
Monitors change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end RSA 512-bit key exchanges on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Key Exchanges RSA512 Total No Change Performance Monitor
Alert Message
Total number of front-end RSA 512-bit key exchanges on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - Front-End Sessions Total No Change Performance Monitor

Display Name Protocol SSL - Front-End Sessions Total No Change Performance Monitor
Description
Monitors change of the total number of front-end SSL sessions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of front-end SSL sessions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - Front-End Sessions Total No Change Performance Monitor
Alert Message
Total number of front-end SSL sessions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Protocol SSL - SSL Card Status

Display Name Protocol SSL - SSL Card Status
Description
Monitors the status of the SSL card(s).
Knowledge Article
Summary

This monitor checks status of the SSL card(s). It compares the number of SSL crypto cards present on the NetScaler appliance with the number of SSL cards that are UP.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name SSL Card Status
Alert Message
One or more SSL cards present on {0} NetScaler appliance is not UP.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Protocol SSL - SSL Engine Status

Display Name Protocol SSL - SSL Engine Status
Description
Monitors the state of the SSL Engine.
Knowledge Article
Summary

This monitor checks state of the SSL Engine (1=UP/0=DOWN). This state is decided based on SSL Feature/License status and minimum number of cards UP.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name SSL Engine Status
Alert Message
SSL engine state is DOWN on {0} NetScaler appliance.
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

Protocol SSL - SSL Transactions Total No Change Performance Monitor

Display Name Protocol SSL - SSL Transactions Total No Change Performance Monitor
Description
Monitors change of the total number of SSL transactions on the NetScaler appliance.
Knowledge Article
Summary

This monitor detects change of the total number of SSL transactions on the NetScaler appliance. If there is no change the warning state is reported and an alert is issued.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 300 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name Protocol SSL - SSL Transactions Total No Change Performance Monitor
Alert Message
Total number of SSL transactions on the NetScaler appliance {0} has not changed for a while.
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 3

Top

Temperature Monitor - CPU 0 (Celsius)

Display Name Temperature Monitor - CPU 0 (Celsius)
Description
CPU 0 temperature. 9800 and 9960 platforms display internal chip temperature. This is a critical counter.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of CPU 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

9800 and 9960 platforms display internal chip temperature. CPU 0 Temperature is a critical counter.

Configuration

NetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - CPU 0 (Celsius)
Alert Message
CPU 0 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - CPU 1 (Celsius)

Display Name Temperature Monitor - CPU 1 (Celsius)
Description
CPU 1 temperature. 9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. This is a critical counter.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of CPU 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

9800 and 9960 platforms display internal chip temperature. 7000, 9010 and 10010 platforms display CPU 0 temperature. CPU 1 Temperature is a critical counter.

Configuration

NetScaler appliance models have different CPU temperature specifications. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - CPU 1 (Celsius)
Alert Message
CPU 1 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 0 (Celsius)

Display Name Temperature Monitor - Device 0 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 0.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 0 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 0 (Celsius)
Alert Message
Device 0 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 1 (Celsius)

Display Name Temperature Monitor - Device 1 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 1.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 1 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 1 (Celsius)
Alert Message
Device 1 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 2 (Celsius)

Display Name Temperature Monitor - Device 2 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 2.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 2 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 2 (Celsius)
Alert Message
Device 2 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Device 3 (Celsius)

Display Name Temperature Monitor - Device 3 (Celsius)
Description
Temperature of a device connected to health monitoring chip through pin 3.
Knowledge Article
Summary

This monitor checks the temperature (Celsius) of a device connected to health monitoring chip through pin 3 on a Citrix NetScaler Physical Appliance.

This monitor is disabled by default.

Configuration

Auxiliary device temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Device 3 (Celsius)
Alert Message
Device 3 temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default No

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Temperature Monitor - Internal (Celsius)

Display Name Temperature Monitor - Internal (Celsius)
Description
Internal temperature of health monitoring chip. This is a critical counter.
Knowledge Article
Summary

This monitor checks the internal temperature of health monitoring chip (Celsius) on a Citrix NetScaler Physical Appliance.

This monitor is enabled by default.

Internal Temperature is a critical counter.

Configuration

Internal temperature has no defined threshold in documentation. WarningThreshold and CriticalThreshold values should be adjusted to suit your environment.

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 0.

  • WarningThreshold - Warning threshold temperature value. Default value is 60.

  • CriticalThreshold - Critical threshold temperature value. Default value is 70.

  • NumberOfSamples - Number of sample values considered before reporting warning or critical state. Default value is 2.

Alert Name Temperature Monitor - Internal (Celsius)
Alert Message
Internal temperature on {0} device is {1} degrees (Celsius).
Target Citrix NetScaler Appliance
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 60
CriticalThreshold 70
CacheExpirationFactor 0

Top

Citrix NetScaler Appliance (v10.x and later)

AAA - Current ICAOnly Sessions Drop

Display Name AAA - Current ICAOnly Sessions Drop
Description
Monitors drop in number of current ICAOnly sessions during IntervalSeconds period of time.
Knowledge Article
Summary

This monitor checks for drop in the number of current ICAOnly sessions during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for drop in number of current ICAOnly sessions during IntervalSeconds period of time. Default value is 100.

Alert Name AAA - Current ICAOnly sessions drop
Alert Message
Number of ICA only sessions on {0} appliance is decreased by more than predefined threshold.

Delta value: {1}
Current number of ICA only sessions: {2}
Target Citrix NetScaler Appliance (v10.x and later)
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 100

Top

AAA - Current ICAOnly Sessions Minimum

Display Name AAA - Current ICAOnly Sessions Minimum
Description
Monitors if number of current ICAOnly sessions is below minimum specified by Threshold parameter.
Knowledge Article
Summary

This monitor checks if number of current ICAOnly sessions is below minimum specified by Threshold parameter.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Minimum number of current ICAOnly sessions. If lower, monitor goes into warning state. Default value is 5.

Alert Name AAA - Current ICAOnly sessions minimum
Alert Message
Number of current ICAOnly sessions on {0} appliance is below minimum specified by Threshold parameter.

Current ICAOnly sessions: {1}
Target Citrix NetScaler Appliance (v10.x and later)
Enabled by default No

Health States
Monitor State Health State
Ok Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 5

Top

Citrix NetScaler Appliance Channel

Channel Availability State Monitor

Display Name Channel Availability State Monitor
Description
Monitors current state of Citrix NetScaler channel.
Knowledge Article
Summary

This monitor checks the current state of the specified channel.

The interface state set to UP only if the link state is UP and administrative state is ENABLED.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Skip States - The list of states for which monitoring will be skipped. For state matching regular expression is used. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

  • Healthy States - The list of states which causes health state. For state matching regular expression is used. For example, current interface state has UP, DOWN, PARTIAL-UP values. If the alert is expected for DOWN state only the healthy value needs to set to UP|PARTIAL-UP or .*UP.

External

For more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site.

For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.htm site.

Alert Name Channel Availability State Monitor
Alert Message
Channel {0} on {1} device has state: {2}.
Target Citrix NetScaler Appliance Channel
Enabled by default Yes

Health States
Monitor State Health State
Healthy Healthy
Unhealthy Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
IgnoreStates DISABLED
HealthyCondition UP

Top

Citrix NetScaler Appliance IPv4

IPv4 Address Conflict

Display Name IPv4 Address Conflict
Description
Monitors IPv4 Conflicts.
Knowledge Article
Summary

This monitor checks NetScaler system log for IP conflicts.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 3600 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name IPv4 Address Conflict
Alert Message
                        The IP address conflict occurred.
                        Conflicted IP: {0}
                        Detected on NetScaler with IP address: {1}

                        Detailed Info:
                        {2}
                    
Target Citrix NetScaler Appliance IPv4
Enabled by default No

Health States
Monitor State Health State
No IP Conflict Healthy
IP Conflict Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 0.0

Top

Citrix NetScaler Appliance IPv6

IPv6 Address Conflict

Display Name IPv6 Address Conflict
Description
Monitors IPv6 Conflicts.
Knowledge Article
Summary

This monitor checks NetScaler system log for IP conflicts.

This monitor is disabled by default.

Configuration

The following configuration parameters are customizable:

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 3600 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name IPv6 Address Conflict
Alert Message
                        The IP address conflict occurred.
                        Conflicted IP: {0}
                        Detected on NetScaler with IP address: {1}

                        Detailed Info:
                        {2}
                    
Target Citrix NetScaler Appliance IPv6
Enabled by default No

Health States
Monitor State Health State
No IP Conflict Healthy
IP Conflict Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 0.0

Top

Citrix NetScaler Appliance LDAP Authentication Server

Authentication Server LDAP - Authentication Failures

Display Name Authentication Server LDAP - Authentication Failures
Description
Number of LDAP authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the LDAP authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server LDAP - Authentication failures
Alert Message
The number of authentication failures on LDAP authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance LDAP Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

Citrix NetScaler Appliance Memory Pool

Citrix NetScaler Feature Memory Percentage Usage

Display Name Citrix NetScaler Feature Memory Percentage Usage
Description
Monitors percentage of NetScaler memory used by the feature.
Knowledge Article
Summary

This monitor checks percentage of NetScaler memory used by the feature.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Citrix NetScaler Feature Memory Percentage Usage
Alert Message
{0} feature memory usage on {1} device is {2} percents.
Target Citrix NetScaler Appliance Memory Pool
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
NumberOfSamples 2
WarningThreshold 80
CriticalThreshold 95
CacheExpirationFactor 1

Top

Citrix NetScaler Appliance Network Interface

Interface Availability State Monitor

Display Name Interface Availability State Monitor
Description
Monitors current state of Citrix NetScaler Interface.
Knowledge Article
Summary

This monitor checks the current state of the specified interface.

The interface state set to UP only if the link state is UP and administrative state is ENABLED.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Skip States - The list of states for which monitoring will be skipped. For state matching regular expression is used. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

  • Healthy States - The list of states which causes health state. For state matching regular expression is used. For example, current interface state has UP, DOWN, PARTIAL-UP values. If the alert is expected for DOWN state only the healthy value needs to set to UP|PARTIAL-UP or .*UP.

External

For more information about regular expression in SCOM look at http://support.microsoft.com/en-us/kb/2702651 and https://msdn.microsoft.com/en-us/library/ee692979.aspx sites. To combine more than one value use | char as value separator, or to disable this feature enter some non existing state.

For more information about Citrix NetScaler interface state configuration visit the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-enblng-and-dsablng-nw-intrfcs-tsk.html site.

For details on how to configure and manage Citrix NetScaler Interfaces check the http://support.citrix.com/proddocs/topic/ns-system-10-5-map/ns-nw-interfaces-configrng-nw-intrfcs-con.htm site.

Alert Name Interface Availability State Monitor
Alert Message
Interface {0} on {1} device has state: {2}.
Target Citrix NetScaler Appliance Network Interface
Enabled by default Yes

Health States
Monitor State Health State
Healthy Healthy
Unhealthy Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
IgnoreStates DISABLED
HealthyCondition UP

Top

Citrix NetScaler Appliance Radius Authentication Server

Authentication Server Radius - Authentication Failures

Display Name Authentication Server Radius - Authentication Failures
Description
Number of Radius authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the Radius authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of Radius authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server Radius - Authentication failures
Alert Message
The number of authentication failures on Radius authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance Radius Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

Citrix NetScaler Appliance SSL Certificate

SSL Certificate Expiration Configuration State Monitor

Display Name SSL Certificate Expiration Configuration State Monitor
Description
Monitors state of Citrix NetScaler SSL certificate.
Knowledge Article
Summary

This monitor checks the number of days remaining for the certificate to expire.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • WarningThreshold - The number of days remaining for the certificate to expire after which the warning state is reported. Default value is 20.

  • CriticalThreshold - The number of days remaining for the certificate to expire after which the error state is reported. Default value is 0.

Alert Name SSL Certificate Expiration Configuration State Monitor
Alert Message
SSL Certificate {0} on {1} NetScaler device expires in {2} days.
Target Citrix NetScaler Appliance SSL Certificate
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 20
CriticalThreshold 0
SyncTime
Debug false
CacheExpirationFactor 1.0

Top

Citrix NetScaler Appliance TACACS Authentication Server

Authentication Server TACACS - Authentication Failures

Display Name Authentication Server TACACS - Authentication Failures
Description
Number of TACACS authentication failures in a time period.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of authentication failures on the TACACS authentication server that occurred during IntervalSeconds period of time.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of TACACS authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name Authentication Server TACACS - Authentication failures
Alert Message
The number of authentication failures on TACACS authentication server {0} has changed by {1} on NetScaler appliance {2}.
Target Citrix NetScaler Appliance TACACS Authentication Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

LB Service

Load Balancing Service - State Monitor

Display Name Load Balancing Service - State Monitor
Description
Monitors state of a Citrix NetScaler load balancing service.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing Service.

This monitor is enabled by default.

Services on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved service state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Service - State Monitor
Alert Message
Load balancing service {0} on {1} device has state: {2}.
Target LB Service
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

LB Service Groups

Load Balancing Service Group - Effective State Monitor

Display Name Load Balancing Service Group - Effective State Monitor
Description
Monitors effective state of a Citrix NetScaler load balancing service group.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing ServiceGroup depending on state of the group members.

This monitor is enabled by default.

ServiceGroup on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • PARTIAL UP

  • PARTIAL DOWN

  • OUT OF SERVICE

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved servicegroup state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Service Group Effective State Monitor
Alert Message
                        Load Balancing Service Group {0} on {1} device has effective state: {2}.

                        {3}
                        {4}
                    
Target LB Service Groups
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

LB Virtual Server

Load Balancing Virtual Server - Health Status Percentage

Display Name Load Balancing Virtual Server - Health Status Percentage
Description
Health status percentage in relation to total number of active services bound to the virtual server.
Knowledge Article
Summary

This monitor checks health status percentage in relation to total number of active services bound to the virtual server.

This monitor is enabled by default.

Note that health status percentage is 100% in case when virtual server is disabled (curstate = "OUT OF SERVICE").

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • WarningThreshold - Warning threshold for health status percentage. Default value is 50.

  • CriticalThreshold - Critical threshold for health status percentage. Default value is 0.

Alert Name Load Balancing Virtual Server - Health Status Percentage
Alert Message
Health status percentage for virtual server {0} on {1} NetScaler device is {2}%.
Target LB Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
WarningThreshold 50
CriticalThreshold 0
SyncTime
Debug false
CacheExpirationFactor 1

Top

Load Balancing Virtual Server - State Monitor

Display Name Load Balancing Virtual Server - State Monitor
Description
Monitors state of a Citrix NetScaler load balancing virtual server.
Knowledge Article
Summary

This monitor checks the current state of Citrix NetScaler Load Balancing Virtual Server.

This monitor is enabled by default.

Virtual servers on a NetScaler appliance can have any of the following statuses:

  • UP

  • DOWN

  • OUT OF SERVICE

The status of a virtual server might be marked as Out of Service when you disable the virtual server but do not delete it. When the status of the virtual server is marked as UP, it is operational and ready to service requests.

The following are the probable reasons for the status of a virtual server being marked as DOWN:

  • No service is bound to the virtual server.

  • All services bound to the virtual server are not available.

  • The Load Balancing or other related features are not enabled.

  • The Load Balancing or other related features are not licensed.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • Success Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "success" health state of the monitor. Default value is UP|OUT OF SERVICE.

  • Critical Value - Value or values (use vertical bar for separation: value1|value2|value3) expected for "critical" health state of the monitor. Default value is DOWN.

Monitor health state depends on values specified under "Success Value" and "Critical Value" parameters.

If retrieved virtual server state value falls in neither "success" nor "critical" group, the monitor would go to the "warning" health state.

Alert Name Load Balancing Virtual Server - State Monitor
Alert Message
Load balancing virtual server {0} on {1} device has state: {2}.
Target LB Virtual Server
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning
Critical Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1.0
SuccessValue UP|OUT OF SERVICE
CriticalValue DOWN

Top

NetScaler Appliance (v10.x and later) SSL Action

SSL Action Hits Not Changed

Display Name SSL Action Hits Not Changed
Description
Monitors that specific action hits not changed during predefined interval.
Knowledge Article
Summary

This monitor check hits count for the action. If hits count is not changed for specified time interval it generates an alert.

If some action are rarely executed override the update interval or if disable it.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 3600 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name SSL Action Hits Not Changed
Alert Message
SSL Action hits value for {0} action on {1} NetScaler appliance for long time is not changed.

This usually indicate that there are no traffic which will trigger the action.
Target NetScaler Appliance (v10.x and later) SSL Action
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 1

Top

SSL Action Undef Hits

Display Name SSL Action Undef Hits
Description
Monitors that specific action increasing undef hits.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of undef hits on the action that occurred during IntervalSeconds period of time.

If undef hits for specific period are greater than threshold value an alert is generated.

When the rule evaluation turns out to be undefined undef hits counter is incremented.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name SSL Action Undef Hits
Alert Message
SSL Action undef hits value for {0} action on {1} appliance is increased more than specified by threshold value. 

Increase value is: {2}
Target NetScaler Appliance (v10.x and later) SSL Action
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

NetScaler Appliance (v10.x and later) SSL Policy

SSL Policy Undef Hits

Display Name SSL Policy Undef Hits
Description
Monitors that specific policy increasing undef hits.
Knowledge Article
Summary

This monitor detects the change (increase) in the number of undef hits on the policy that occurred during IntervalSeconds period of time.

If undef hits for specific period are greater than threshold value an alert is generated.

Action to be used by the policy when the rule evaluation turns out to be undefined and in this case undef hits counter is incremented.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Threshold - Threshold value for number of LDAP authentication failures that occurred during IntervalSeconds period of time. Default value is 10.

Alert Name SSL Policy Undef Hits
Alert Message
SSL Policy undef hits value for {0} policy on {1} appliance is increased more than specified by threshold value. 

Increase value is: {2}
Target NetScaler Appliance (v10.x and later) SSL Policy
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1
Threshold 10

Top

NetScaler Base Class For Setting Component

Appliance Components Configuration Monitoring Availability

Display Name Appliance Components Configuration Monitoring Availability
Description
Checks appliance URL availability for monitoring for specific component.
Knowledge Article
Summary

This monitor checks the appliance availability for monitoring.

Appliance is available for monitoring if access to the appliance using NITRO API is success.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script (the default value is set to 300 seconds).

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • Debug - When true writes more info in events log. Default value is false.

Alert Name Appliance Configuration Availability
Alert Message
Configuration for appliance {0} cannot be obtained.
Target NetScaler Base Class For Setting Component
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Unsuccessful Critical

Overridable parameters
Parameter Default Value
IntervalSeconds 300
SyncTime
Debug false
CacheExpirationFactor 1

Top

NetScaler SSL Policy

SSL Policy Hits Not Changed

Display Name SSL Policy Hits Not Changed
Description
Monitors that specific policy hits not changed during predefined interval.
Knowledge Article
Summary

This monitor check hits count for the policy. If hits count is not changed for specified time interval it generates an alert.

If some policies are rarely executed override the update interval or if disable it.

This monitor is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script the default value is set to 3600 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

  • NumberOfSamples - Number of consecutive sample values considered before generating an alert. Default value is 3.

Alert Name SSL Policy Hits Not Changed
Alert Message
                        SSL Policy hits value for {0} policy on {1} NetScaler appliance for long time is not changed.

                        This usually indicate that there are no traffic which will trigger the policy.
                    
Target NetScaler SSL Policy
Enabled by default Yes

Health States
Monitor State Health State
Success Healthy
Warning Warning

Overridable parameters
Parameter Default Value
IntervalSeconds 3600
SyncTime
Debug false
CacheExpirationFactor 1
NumberOfSamples 1

Top


Rules

Citrix NetScaler Access Gateway Virtual Server

Access Gateway Virtual Server - Current AAA Users

Display Name Access Gateway Virtual Server - Current AAA Users
Description
Number of Current AAA users on access gateway virtual server.
Knowledge Article
Summary

This rule collects number of current AAA users on access gateway virtual server.

This rule is enabled by default.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

  • CacheExpirationFactor - Cache expiration factor. Default value is 1.0.

  • Debug - When true writes more info in events log. Default value is false.

Target Citrix NetScaler Access Gateway Virtual Server
Enabled by default Yes
Category PerformanceCollection
Generate Alert False
Object Name NetScaler Access Gateway Virtual Server - $Target/Property[Type="CTNSLib!ComTrade.Citrix.NetScaler.Appliance.Component.Base"]/IPAddress$
Counter Name Access Gateway Virtual Server - Current AAA Users

Overridable parameters
Parameter Default Value
IntervalSeconds 900
SyncTime
Debug false
CacheExpirationFactor 1

Top

Access Gateway Virtual Server - Current Users Percentage

Display Name Access Gateway Virtual Server - Current Users Percentage
Description
Percentage of Current Users in relation to Maximum Users that can be logged in.
Knowledge Article
Summary

This rule collects percentage of Current Users in relation to Maximum Users that can be logged in on given Access Gateway Virtual Server.

This rule is enabled by default.

Current Users Percentage is a critical counter. It is calculated using Current Users and Max Users values.

The administrator can configure any number between 0 and 65535 for Max Users on virtual server, but the actual number of users allowed to login into this virtual server will also depend on the total number of user licenses and the total number of currently logged in users.

Configuration

The following configuration parameters are customizable:

  • IntervalSeconds - The recurring interval of time in seconds in which to run the script, the default value is set to 900 seconds.

  • SyncTime - The synchronization time specified by using a 24-hour format. No default value specified.

    </