NetScaler Gateway Service NetScaler Gateway 12.0 NetScaler Gateway 11.1 NetScaler Gateway 11.0 NetScaler Gateway 10.5 NetScaler Gateway 10.1

NetScaler Gateway Release Notes
About NetScaler Gateway
- NetScaler Gateway Architecture
- How User Connections Work
Common Deployments
- Deploying in the DMZ
- Deploying in the Secure Network
Client Software Requirements
- NetScaler Gateway Plug-in System Requirements
- Endpoint Analysis Requirements
Compatibility with Citrix Products
Licensing
- NetScaler Gateway License Types
- Obtaining Your Platform or Universal License Files
- To install a license on NetScaler Gateway
- Verifying Installation of the Universal License
FAQ
Before Getting Started
- Planning for Security
- Prerequisites
- Pre-Installation Checklist
Upgrading
Installing the System
- Configuring NetScaler Gateway
- Using the Configuration Utility
- Policies and Profiles on NetScaler Gateway
- Viewing NetScaler Gateway Configuration Settings
  - Saving the NetScaler Gateway Configuration
  - Clearing the NetScaler Gateway Configuration
- Configuring the NetScaler Gateway by Using Wizards
- Configuring the Host Name and FQDN on NetScaler Gateway
- Installing and Managing Certificates
- Testing Your NetScaler Gateway Configuration
- Creating Virtual Servers
- Configuring IP Addresses on NetScaler Gateway
- Resolving DNS Servers Located in the Secure Network
- Configuring DNS Virtual Servers
- Configuring Name Service Providers
- Configuring Server-Initiated Connections
- Configuring Routing on NetScaler Gateway
- Configuring Auto Negotiation
Authentication and Authorization
- Configuring Default Global Authentication Types
- Configuring Authentication Without Authorization
- Configuring Authorization
  - Configuring Authorization Policies
  - Setting Default Global Authorization
- Disabling Authentication
- Configuring Authentication for Specific Times
- How Authentication Policies Work
- Configuring Local Users
- Configuring Groups
  - Adding Users to Groups
  - Configuring Policies with Groups
- Configuring LDAP Authentication
- Configuring Client Certificate Authentication
- Configuring RADIUS Authentication
- Configuring SAML Authentication
  - To configure SAML authentication
  - Auth Improvements for SAML Authentication
- Configuring TACACS+ Authentication
  - Clear Config Basic Should Not Clear TACACS Config
- Configuring Multifactor Authentication
  - Configuring Cascading Authentication
  - Configuring Two-Factor Authentication
- Configuring Single Sign-On
- Configuring One-Time Password Use
- nFactor for NetScaler Gateway Authentication
- NetScaler Gateway Visualizer
- Configure Citrix Gateway to use RADIUS and LDAP Authentication with Mobile Devices
Configuring the VPN User Experience
- How User Connections Work with the NetScaler Gateway Plug-in
- Choosing the User Access Method
- Deploying NetScaler Gateway Plug-ins for User Access
- Selecting the NetScaler Gateway Plug-in for Users
- Integrating the NetScaler Gateway Plug-in with Citrix Receiver
- Customizing the User Portal
- Configuring Clientless Access
- Configuring the Client Choices Page
  - Showing the Client Choices Page at Logon
  - Configuring Client Choices Options
- Configuring Access Scenario Fallback
  - Creating Policies for Access Scenario Fallback
- Configuring Connections for the NetScaler Gateway Plug-in
- How a Traffic Policy Works
  - Creating a Traffic Policy
  - Removing Traffic Policies
- Configuring Session Policies
  - Creating a Session Profile
  - Binding Session Policies
- Configuring Endpoint Polices
- Advanced Endpoint Analysis Scans
- Managing User Sessions
- AlwaysON
Configuring NetScaler Gateway
- NetScaler Gateway FAQ
Deploying in a Double-Hop DMZ
- Deploying NetScaler Gateway in a Double-Hop DMZ
- How a Double-Hop Deployment Works
- Communication Flow in a Double-Hop DMZ Deployment
  - Authenticating Users
  - Creating a Session Ticket
  - Starting Citrix Receiver
  - Completing the Connection
- Preparing for a Double-Hop DMZ Deployment
- Installing and Configuring NetScaler Gateway in a Double-Hop DMZ
Using High Availability
- How High Availability Works
- Configuring Settings for High Availability
  - Creating or Changing an RPC Node Password
  - Configuring the Primary and Secondary Appliances for High Availability
- Configuring Communication Intervals
- Synchronizing NetScaler Gateway Appliances
- Synchronizing Configuration Files in a High Availability Setup
- Configuring Command Propagation
  - Troubleshooting Command Propagation
- Configuring Fail-Safe Mode
- Configuring the Virtual MAC Address
  - Configuring IPv4 Virtual MAC Addresses
  - Configuring IPv6 virtual MAC addresses
- Configuring High Availability Pairs in Different Subnets
  - Adding a Remote Node
- Configuring Route Monitors
  - Adding or Removing Route Monitors
- Configuring Link Redundancy
- Understanding the Causes of Failover
- Forcing Failover from a Node
Using Clustering
- Configuring Clustering
Maintaining and Monitoring the System
- Configuring Delegated Administrators
  - Configuring Command Policies for Delegated Administrators
  - Configuring Custom Command Policies for Delegated Administrators
- Configuring Auditing on NetScaler Gateway
  - Configuring Logs on NetScaler Gateway
  - Configuring ACL Logging
- Enabling NetScaler Gateway Plug-in Logging
- To monitor ICA connections
Integrating with Citrix Products
How Users Connect to Applications, Desktops, and ShareFile
Deploying with XenMobile App Edition, XenApp, and XenDesktop
Accessing XenApp and XenDesktop Resources with the Web Interface
- Integrating NetScaler Gateway with XenApp or XenDesktop
- Establishing a Secure Connection to the Server Farm
- Deploying with the Web Interface
- Setting Up a Web Interface Site to Work
- Configuring Communication with the Web Interface
- Configuring Additional Web Interface Settings on NetScaler Gateway
  - Configuring Web Interface Failover
  - Configuring Smart Card Access with the Web Interface
- Configuring Access to Applications and Virtual Desktops in the Web Interface
- Configuring SmartAccess
- Configuring SmartControl
- Configuring Single Sign-On to the Web Interface
- Allowing File Type Association
  - Creating a Web Interface Site
  - Configuring NetScaler Gateway for File Type Association
Integrate NetScaler Gateway with XenApp and XenDesktop
Integrate NetScaler Gateway with StoreFront
Configuring Settings for Your XenMobile Environment
- Configuring Load Balancing Servers for XenMobile or Citrix Endpoint Management
- Configuring Load Balancing Servers for Microsoft Exchange with Email Security Filtering
- Configuring XenMobile NetScaler Connector (XNC) ActiveSync Filtering
- Allowing Access from Mobile Devices with Citrix Mobile Productivity Apps
- Configuring Domain and Security Token Authentication for XenMobile
- Configuring Client Certificate or Client Certificate and Domain Authentication
Optimizing Network Traffic with CloudBridge
RfWebUI Persona on NetScaler Gateway UX Configuration
RDP Proxy
- Stateless RDP Proxy
NetScaler Gateway Enabled PCoIP Proxy Support for VMware Horizon View
- Configuring NetScaler Gateway Enabled PCoIP proxy for VMWare Horizon View
- Configuring VMware Horizon View Connection Server
HDX Enlightened Data Transport Support
- When to Use Enlightened Data Transport Support
- Configuring NetScaler Gateway to Support Enlightened Data Transport
Microsoft Intune Integration
- When to Use the Integrated Intune MDM Solution
- Understanding the NetScaler Gateway-Intune MDM Integration
- Configuring Network Access Control device check for NetScaler Gateway virtual server for single factor authentication deployment
- Understanding Azure ADAL Token Authentication
- Configuring NetScaler Gateway Virtual Server for Microsoft ADAL Token Authentication
Type of Service Support for UDP traffic
Proxy Auto Configuration for Outbound Proxy support for NetScaler Gateway
Outbound ICA Proxy support
- Configuring Outbound ICA Proxy
Integrate NetScaler Gateway with XenApp and XenDesktop
Native OTP Support for Authentication
Configuring Server Name Indication Extension
Validating the Server Certificate During an SSL Handshake
Using Advance Policy to Create VPN Policies

View PDF

NetScaler Gateway 12.0

This content has been machine translated dynamically.

Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)

Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)

Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)

此内容已动态机器翻译。放弃

このコンテンツは動的に機械翻訳されています。免責事項

This content has been machine translated dynamically.

This article has been machine translated.

Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)

Ce article a été traduit automatiquement. (Clause de non responsabilité)

Este artículo ha sido traducido automáticamente. (Aviso legal)

この記事は機械翻訳されています.免責事項

이 기사는 기계 번역되었습니다.

Este artigo foi traduzido automaticamente.

这篇文章已经过机器翻译.放弃

Switch to english Auf Englisch anzeigen Lire en anglais Leer en inglés 英語に切り替え 영어로 전환 Mudar para ingles 切换到英文

Translation failed!

Starting Citrix Receiver

September 20, 2018

Contributed by: C

Starting Citrix Receiver is the third stage of the user connection process in a double-hop DMZ deployment. The basic process is as follows:

The user clicks a link to a published application in the Web Interface. The Web Interface sends the ICA file for that published application to the browser for the user device.

The ICA file contains data instructing the web browser to start Receiver.

The ICA file also contains the fully qualified domain name (FQDN) or the Domain Name System (DNS) name of the NetScaler Gateway in the first DMZ.
The web browser starts Receiver and the user connects to NetScaler Gateway in the first DMZ by using the NetScaler Gateway name in the ICA file. Initial SSL/TLS handshaking occurs to establish the identity of the server running NetScaler Gateway.

The official version of this content is in English. Some of the Citrix documentation content is machine translated for your convenience only. Citrix has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Citrix product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Citrix, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Citrix will not be held responsible for any damage or issues that may arise from using machine-translated content.

THIS SERVICE MAY CONTAIN TRANSLATIONS POWERED BY GOOGLE. GOOGLE DISCLAIMS ALL WARRANTIES RELATED TO THE TRANSLATIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, RELIABILITY, AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

NetScaler Gateway 12.0

Starting Citrix Receiver

September 20, 2018

Contributed by: C

Citrix Preview Documentation

This Preview product documentation is Citrix Confidential.

You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.

The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.

The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.

If you do not agree, select Do Not Agree to exit.

Starting Citrix Receiver

Starting Citrix Receiver

In this article