Add NetScaler VPX Instances Deployed in Cloud to NetScaler MAS

You can use NetScaler MAS to manage and monitor the NetScaler VPX instances deployed on a public cloud such as Amazon Web Services (AWS) or Microsoft Azure. Establish Layer 3 connectivity between NetScaler MAS and the NetScaler VPX instances deployed on the public cloud. To establish Layer 3 connectivity, use solutions such as NetScaler CloudBridge Connector, NetScaler SD-WAN, Direct Connect to AWS, VPN in Azure, or third-party connectors such as Equinix.

The following sample topology uses NetScaler CloudBridge Connector for Layer 3 connectivity between NetScaler MAS and the NetScaler VPX instances deployed in the cloud.

localized image

A CloudBridge Connector tunnel is set up between NetScaler appliance NS_Appliance-DC, in datacenter DC, and NetScaler virtual appliance (VPX) NS_VPX_CBC in the public cloud. NS_Appliance-DC and NS_VPX_CBC enable the communication between NetScaler MAS and the NetScaler VPX instance, NS_VPX_1, deployed in the public cloud. After the communication is established, you can discover NS_VPX_1 in NetScaler MAS.

To configure this topology, do the following:

  1. Install, configure, and start a NetScaler VPX instance in the public cloud.

  2. Deploy and configure a NetScaler physical appliance, or provision and configure a NetScaler virtual appliance (VPX) on a virtualization platform in the datacenter.

  3. Configure the CloudBridge Connector between the datacenter and the public cloud. For instructions, see Configuring CloudBridge Connector.

  4. Configure the static route for establishing connection between NetScaler MAS and the NetScaler VPX instances deployed on the cloud as follows:

    1. Log on to NetScaler MAS.

    2. Navigate to System > Static Routes and click Add.

      localized image

    3. In the Network Address field, enter the address of the network that you want to establish a static route from NetScaler MAS through the connector.

    4. In the Netmask field, enter the netmask for the network.

    5. In the Gateway field, enter the address of the gateway.

  5. Add the NetScaler VPX cloud instances to the NetScaler MAS by specifying the range of IP addresses of NetScaler VPX instances in the public cloud. For detailed instructions, Add Instances to NetScaler MAS.

Add NetScaler VPX Instances Deployed in Cloud to NetScaler MAS

In this article