Product Documentation

Proxy Server Settings for zero touch deployment

As a prerequisite for Zero Touch Deployment, the NetScaler SD-WAN Center should be connected to the internet. If your NetScaler SD-WAN Center is connected to the internet through a proxy server, you have to configure the proxy server settings on the NetScaler SD-WAN Center.

Note

This proxy server setting is used for Zero Touch Deployment only.

To configure zero touch proxy server settings:

  1. In the SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.

  2. In the Zero Touch Proxy Server Setting section, enter values for the following fields:

    • IP Address: The IP address of the proxy server.
    • Port: The network port number on which the proxy server accepts connections.
    • User Name: The proxy server user name
    • Password: The password for the proxy server.

    Note

    You can leave the User Name and Password field blank if there is no authentication configured on the proxy server.

    localized image

  3. Click Apply, a confirmation dialog box appears.

    localized image

  4. Click Apply.

Note

You can remove the proxy server settings altogether, if the NetScaler SD-WAN Center is connected to the internet directly. You can also remove the proxy server settings and configure another proxy server, if required.

To remove proxy server settings:

  1. In the NetScaler SD-WAN Center web interface, navigate to Administration > Global Settings > Management Interface.

  2. In the Zero Touch Proxy Server Setting section, click Remove.

    localized image

  3. Click Remove, a confirmation dialog box appears.

    localized image

  4. Click Remove.

Proxy Server Settings for zero touch deployment

In this article