Switch on the Appliance
After you have installed the appliance in a rack and connected the cables, verify that the power cable is properly connected. If you have installed a second power supply, make sure the second cable is connected to an outlet for a different circuit than the first. After verifying the connections, you are ready to switch on the appliance.
To switch on the appliance
- Verify that the appliance is connected through a console or Ethernet port. This will ensure that you can configure the appliance after it is switched on.
- Press the ON/OFF toggle power switch on the back panel of the appliance.
Be aware of the location of the emergency power off (EPO) switch, so that if an electrical accident occurs you can quickly remove power from the appliance.