Product Documentation

Citrix SD-WAN 5100 SE

The SD-WAN 5100 SE is a 2U appliance. Each model has two 10-core processors for a total of 20 physical cores (40 cores with hyper-threading), and 128 GB (GB) of memory. For latest performance and bandwidth capacity details, please see also the latest datasheet that gets updated more regularly at: citrix.com; datasheet.

The SD-WAN 5100 SE appliance front panel has the following ports:

  • 10/100Base-T copper Ethernet Port (RJ45), also called lights out management port. You can use this port to remotely monitor and manage the appliance independently of the appliance’s software. The LEDs on the lights out management port are not operational by design.
  • RS232 serial console port.
  • Two 10/100/1000Base-T copper Ethernet management ports (RJ45). These ports are used to connect directly to the appliance for system administration functions.
  • Eight 10G ports.

The following components are visible on the back panel of the SD-WAN 5100 SE appliance:

  • 2 X 1 TB removable hard disk drive.
  • USB port (reserved for a future release).
  • Power switch, which turns off power to the appliance, as if you were to unplug the power supply. Press the switch for five seconds to turn off the power.
  • Disable alarm button. This button is functional only when the appliance has two power supplies. Press this button to stop the power alarm from sounding when you have plugged the appliance into only one power outlet or when one power supply is malfunctioning and you want to continue operating the appliance until it is repaired.
  • Dual power supplies (either AC or DC), each rated at 850 watts, 100–240 volts.

localized image

Upgrade 5100 SE appliance to 5100 EE appliance

Insert solid state drive (SSD)

  1. Insert the required SSD in the standard edition appliance. For instructions about how to insert SSD, see Solid State Drive (Field Replaceable Unit).
    1. 5100 SE appliance requires 800 GB more SSD. Insert the SSD into the third bay. localized image
  2. Restart the appliance through the SD-WAN web management interface.
  3. Ensure that the software release version installed on the appliance is SD-WAN release version 10.0. Follow the steps provided here; upgrade new appliance.
  4. Install the Premium (Enterprise) Edition platform license. For license information, see the Citrix SD-WAN product downloads site.
  5. Upgrade the network using single step upgrade to software release version 10.0 or later.

Configure Management IP address using serial Console

  1. Access serial console of the appliance.
  2. Log in using the root/nsroot credentials.
  3. Type the ssh admin@169.254.0.60 -l admin command.
  4. Type password: password.
  5. Type the **management_ip** command.
  6. Type the **set interface 192.168.100.1 255.255.255.0 192.168.100.254** command.
  7. Type the **apply** command.

Citrix SD-WAN 5100 SE