Product Documentation

NetScaler SD-WAN 210 SE

May 09, 2018

This appliance has 2-core processors with 4 GB memory and 64 gigabytes (GB) of storage.

The following figure shows the front panel of the 210 SE appliance.

Note

The 210-SE appliance cannot be configured as an MCN appliance. 

Figure 1. SD-WAN 210-SE front panel 

localized image

LED

Description

Ethernet Copper Ports LED

Active/Link: Green Speed 1000: Orange Speed 100: Green Speed 10 : off

Bypass LEDs

Normal Mode: Green

Bypass Mode: Orange

Ethernet Fiber Ports

Active/Link: Green

Speed 1000: Orange

System and Data LEDs

System Power on: Green

System Power off: off        

Data access storage: Blue

Figure 2.  SD-WAN 210 SE back panel

localized image

The following components are visible on the back panel of the 210 SE appliance:

Interface

Port Labels

Type

Description

1/1 and 1/2

Bypass/FTW

Fail-to-wire 

1/3 

Traffic 

Network traffic 

Management 

RJ-45 

A copper Ethernet (RJ45) management port.

The management port is used to connect directly to the appliance for system administration functions. You can use this port for initial provisioning of Virtual WAN.

1/4 and 1/5

SFP and Ethernet (combination ports)

Used as a combination of SFP and Ethernet one each on the top and bottom.

USB 

USB ports 

Console 

RS-232 serial 

A RS232 serial console port

Reset 

Reset button 

Consult Citrix technical support for more information.

Power 

Power button 

Power button to power on or off the appliance. Press the switch for five seconds to switch off the power.

Power Supply 

DC Power Supply 

Single power adapter. Power rating: 40 W, voltage: 12 V, and current: 3.33 A.

Citrix NetScaler SD-WAN 210-SE LTE

The Citrix NetScaler SD-WAN 210 SE ** LTE appliance is a 1U appliance. This appliance has 2-core processor with 4 GB memory and 64 gigabytes (GB) of storage.

The following figure shows the front panel of the 210 SE LTE appliance.

Figure 3. Citrix NetScaler SD-WAN 210 SE (LTE) front panel with Antenna 

localized image

LED

Description

Ethernet Copper Ports LED

Active/Link: Green Speed 1000: Orange Speed 100: Green Speed 10: off

Bypass LEDs

Normal Mode: Green

Bypass Mode: Orange

Ethernet Fiber Ports

Active/Link: Green

Speed 1000: Orange

System and Data LEDs

System Power on: Green

System Power off: off        

Data access storage: Blue

Figure 4. Citrix NetScaler SD-WAN 210 SE (LTE) back panel with Antenna

localized image

The following components are visible on the back panel of the 210 SE LTE appliance:

Interface

Port Labels

Type

Description

1/1 and 1/2

Bypass/FTW

FTW ports 

1/3

Traffic 

Traffic port 

Management

RJ-45 

A copper Ethernet (RJ45) management port. The management port is used to connect directly to the appliance for system administration functions. You can use this port for initial provisioning of Virtual WAN.

2

1/4 and 1/5

SFP and Ethernet (combination ports)

Used as a combination of SFP and Ethernet one each on the top and bottom.

USB 

USB ports 

Console 

RS-232 serial 

A RS232 serial console port

Reset 

Reset button 

Consult Citrix technical support for more information.

Power 

Power button 

Power button to power on or off the appliance. Press the switch for five seconds to switch off the power.

Power supply 

DC power supply 

Single power adapter. Power rating: 40 W, voltage: 12 V, and current: 3.33 A.

Antenna Connectors

Male connectors 

Connectors for antenna

Two antenna 

LTE antennas 

Antennas shipped with the appliance.