Product Documentation

NetScaler SD-WAN 2000

Aug 09, 2017

The Citrix NetScaler SD-WAN 2000 platform has 3 models: SD-WAN 2000-010, SD-WAN 2000-020, and SD-WAN 2000-050, with bandwidths of 10Mbps, 20Mbps, and 50Mbps, respectively. Each model is a 1U appliance with one quad-core processor and 24 gigabytes (GB) of memory.

The following figure shows the front panel of the SD-WAN 2000 appliance.

Figure 1. Citrix NetScaler SD-WAN 2000, front panel
 
localized image

The appliance has the following ports:

  • An RS232 serial console port.
  • A copper Ethernet (RJ45) Port called the Lights out Management (LOM) port. You can use this port to remotely monitor and manage the appliance independently of the appliance's software.
  • A copper Ethernet (RJ45) management port, numbered 0/1. The management port is used to connect directly to the appliance for system administration functions.

    Note: The LOM port also operates as a management port.

  • Four 10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, and 1/4 from left to right. The four ports form two accelerated pairs, which function as accelerated bridges. Ports 1/1 and 1/2 are accelerated pair A (apA), and 1/3 and 1/4 are accelerated pair B (apB).

The following figure shows the back panel of the SD-WAN 2000 appliance.

Figure 2. Citrix SD-WAN 2000 appliance, back panel

localized image

The following components are visible on the back panel of the SD-WAN 2000 appliance:

  • 600 GB removable solid-state drive, which stores the appliance's software and user data.
  • Power switch, which turns off power to the appliance. Press the switch for five seconds to turn off the power.
  • USB port (reserved for a future release).
  • Non-maskable interrupt (NMI) button, for use at the request of Technical Support to produce a core dump. You must use a pen, pencil, or other pointed object to press this red button, which is recessed to prevent unintentional activation.
  • Single power supply, rated at 300 watts, 100-240 volts.