Product Documentation

Auto Secure Peering Initiated from EE Appliance at DC Site and Branch Site EE Appliance

Aug 09, 2017

Configuration

To configure auto secure peering on a new Enterprise Edition appliance at DC:

     1.  In the SD-WAN web GUI, navigate to Configuration > WAN OptimizationSecure Acceleration > Secure Peering.

localized image

     2.  Configure keystore by providing the keystore password or by disabling keystore.

localized image
localized image
localized image

     3.    Enable Secure Peering by selecting Private CA to perform AUTOMATIC SECURE PEERING.

localized image
localized image

     4.  Click on the ‘+’ icon and to add IP with username and password. After successful authentication with the remote IP and credentials provided, a request is sent to the remote machine that will install CA Certificate and the Private cert and key for itself locally on the remote machine.

Note

IP Address – IP Address of remote EE Appliance MANAGEMENT IP

Username – Username of remote EE Appliance

Password – Password of remote EE Appliance

localized image

Monitoring

     1. To validate if the Private CA and Private Certificate Key pair is generated successfully, review the information displayed below.

localized image
localized image

     2.  View Secure Partner Information on the Enterprise Edition Appliance under Monitoring > WAN Optimization > Partners page.

localized image

     3.  On partner appliance, view Secure Partner Information on the Enterprise Edition Appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

localized image

Troubleshooting

     1. View Secure Partner Success / Failure Information on the Enterprise Edition Appliance under Monitoring > WAN Optimization > Partners > Secure Partners page.

localized image

     2.  On partner Appliance, view Secure Partner Information on the Enterprise Edition Appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

localized image

     3.  On partner Appliance, view Secure Partner Information on the Enterprise Edition Appliance under Monitoring > Appliance Performance > Logging page.

localized image
localized image