Product Documentation

Auto Secure Peering Initiated from EE Appliance at DC Site and Branch with WANOP/SE Appliance

Aug 09, 2017

Configuration

To configure a new Enterprise Edition appliance with auto secure peering at the DC site:

     1.    In the SD-WAN web GUI, navigate to Configuration > WAN Optimization > Secure Acceleration > Secure Peering.

localized image

     2.  Configure keystore by providing the keystore password or by disabling the keystore.

localized image

localized image

localized image

     3.  Enable Secure Peering by selecting Private CA to perform AUTOMATIC SECURE PEERING.

localized image

localized image

     4.  Click on the ‘+’ icon and to add IP with username and password. After successful authentication with the remote IP and credentials provided, a request is sent to the remote machine that will install CA Certificate and the Private cert and key for itself locally on the remote machine.

Note

IP Address – IP Address of remote WANOP Standalone or Standard Edition Appliance MANAGEMENT IP.

Username – Username of remote WANOP Standalone or Standard Edition Appliance.

Password – Password of remote WANOP Standalone or Standard Edition Appliance.

 

localized image

     5.  After Successful Authentication, you can view Secure Peering as TRUE and the partner IP as one of the Virtual IP of the remote WANOP Standalone appliance.

localized image

Monitoring

     1.  To validate if the Private CA and Private Certificate Key pair is generated successfully, review the information below.

localized image

localized image

     2.  View Secure Partner Information on the Enterprise Edition appliance under Monitoring > WAN Optimization > Partners page.

localized image

     3.  On partner appliance, View Secure Partner Information on the Enterprise Edition appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

localized image

Troubleshooting

     1.  View Secure Partner Success / Failure Information on the Enterprise Edition appliance under Monitoring > WAN Optimization > Partners > Secure Partners page.

localized image

     2. On partner appliance, view Secure Partner Information on the Enterprise Edition appliance under Monitoring > Partners & Plug-ins > Secure Partners page.

localized image

     3. On partner appliance, view Secure Partner Information on the Enterprise Edition appliance under Monitoring > Appliance Performance > Logging page.

localized image