Product Documentation

Monitoring cluster setup using SNMP MIB with SNMP link

SNMP mib is device specific information that has been configured on the SNMP agent for the purpose of identifying a Citrix ADC appliance, such as appliance name, administrator, location. In a cluster setup, you can now configure the SNMP MIB in any node by including the “ownerNode” parameter in the set snmp mib command. Without this parameter, the set snmp mib command applies only to the Cluster Coordinator (CCO) node.

To display the MIB configuration for a cluster node other than the CCO, include the “ownerNode” parameter in the show snmp mib command

Configuring SNMP MIB on CLIP

To configure and view MIB configuration on CLIP by using the command line interface.

set snmp mib [-contact <string>] [-name <string>] [-location <string>]
      [-customID <string>] [-ownerNode <positive_integer>]
Done
show snmp mib [-ownerNode <positive_integer>]

 > set mib -contact John -name NS59 -location San Jose -customID 123 -ownerNode 3
Done
> sh mib -ownerNode 3
        --------------------
         Cluster Node ID: 3
        --------------------
        NetScaler system MIB:
        sysDescr:    NetScaler NS11.1: Build 46.4.a.nc, Date: Jun  7 2016, 10:27:29
        sysUpTime:   124300
        sysObjectID: .1.3.6.1.4.1.5951.1.1
        sysContact:  John
        sysName:     NS59
        sysLocation: San Jose
        sysServices: 72
        Custom ID: 123
 Done

> unset mib -contact -name -location -customID -ownerNode 3
 Done
> sh mib -ownerNode 3
        --------------------
         Cluster Node ID: 3
        --------------------
        NetScaler system MIB:
        sysDescr:    NetScaler NS11.1: Build 46.4.a.nc, Date: Jun 7 2016, 10:27:29
        sysUpTime:   146023
        sysObjectID: .1.3.6.1.4.1.5951.1.1
        sysContact:  WebMaster (default)
        sysName:     NetScaler
        sysLocation: POP (default)
        sysServices: 72
        Custom ID: Default
 Done

Monitoring cluster setup using SNMP MIB with SNMP link