Product Documentation

Bind a priority queuing policy

After you create a priority queuing policy, you must bind it to the appropriate virtual server to put it into effect.

Bind a priority queuing policy by using the CLI

At the command prompt, type the following commands to bind a policy and verify the configuration:

-  bind lb vserver <name> -policyName <policyname>
-  show lb vserver <name>

Example:

> bind lb vserver lbvip -policyname pol_cgibin
 Done
> show lb vserver lbvip
        lbvip (8.7.6.6:80) - HTTP       Type: ADDRESS
        State: DOWN
        Last state change was at Wed Jul 15 05:54:24 2009 (+782 ms)
        Time since last state change: 26 days, 05:44:37.370
        Effective State: DOWN
        Client Idle Timeout: 180 sec
        Down state flush: ENABLED
        Disable Primary Vserver On Down : DISABLED
        Port Rewrite : DISABLED
        No. of Bound Services :  0 (Total)       0 (Active)
        Configured Method: LEASTCONNECTION
        Mode: IP
        Persistence: NONE
        Vserver IP and Port insertion: OFF
        Push: DISABLED  Push VServer:
        Push Multi Clients: NO
        Push Label Rule: none

1)      Policy : ns_cmp_msapp Priority:0

1)      Priority Queuing Policy : pol_cgibin
 Done

Bind a priority queuing policy by using the GUI

  1. In the navigation pane, locate and select the virtual server to which you want to bind the priority queuing policy.
    • To select a load balancing virtual server, expand Traffic Management > Load Balancing > Virtual Servers, then select the load balancing virtual server that you want..
    • To select a content switching virtual server, expand Traffic Management > Content Switching > Virtual Servers, then select the content switching virtual server that you want..
  2. In the Configure Virtual Server dialog box, select the Policies tab.
  3. Click the double right-arrow (») symbol to display the complete list of policy types, and then select Priority Queuing from the drop-down list.
  4. Click Insert Policy.
  5. In the Policy Name row, select the policy that you want to bind from the drop-down list.
  6. ClickOK to save your changes.

Bind a priority queuing policy