For the latest content, see NetScaler MPX.
Note: 10G transceiver are not supported in 1G slots.
The following table shows the compatibility matrix of transceivers and ports available on the NetScaler appliance.
|10G||1G Fiber||1G Copper|
|1G Fiber||Not Supported||Supported||Not Supported|
|1G Copper||Not Supported||Not Supported||Supported|
QSFP+ stands for Quad Small Form-factor Pluggable, which is a small, hot-pluggable transceiver for connecting data devices. This transceiver is used for 40G interfaces.
QSFP+ to Four SFP+ Copper Breakout Cables—These cables connect to four SFP+ 10GE ports of a NetScaler appliance on one end and to a QSFP+ 40G port of a Cisco switch on the other end.
Support for 40G connectivity—NetScaler models that have at least four 10G SFP+ ports connect to Cisco 40G interfaces by aggregating four of the 10G SFP+ ports to form a 40G link aggregation channel. QSFP to Four port SFP+ Copper Breakout Cable QSFP-4SFP10G-CU3M (reports as L45593-D178-C30) is used.
QSFP-4SFP10G-CU3M breakout cable is supported by NetScaler release 9.3 build 65.8 or later, and release 10.1 build 122.17 or later.
|Platform||Number of Power Supplies shipped|
|MPX 7500/9500||1 (You can order a second power supply.)|
|MPX 15000/17000||1 (You can order a second power supply.)|
|MPX 17500/19500/21500||1 (You can order a second power supply.)|
The appliance ships with the standard 4-post rail kit that fits racks from 28-38 inches.
The compact 4-post rail kit for racks from 23-33 inches, or the 2-post rail kit for 2-post racks, has to be purchased separately. Contact your Citrix sales representative to order the appropriate kit.
Yes, customers who enable Transport Layer Security (TLS) on their LOM interface will have their VNC connections delivered over TLS as well.
For more information on LOM security guidelines, see Secure Deployment Guide for NetScaler MPX, VPX, and SDX Appliances.