New and deprecated commands, parameters, and SNMP OIDs

This section lists the new and deprecated commands, parameters, and SNMP OIDs.

New commands

The following table lists the new commands in release 12.0. |Command group|Command| |–|–| |GSLB|rename gslb seviceGroup| |LSN|stat lsn pool| Network|stat rnat6 and stat MapBmr| |User|enable user vserver and disable user vserver|

New parameters

Command goup: AAA

Command:

  • show aaa session [-sessionKey]
  • kill aaa session [-sessionKey]
  • set aaa radiusParams {-tunnelEndpointClientIP]
  • show aaa radiusParams [-tunnelEndpointClientIP]
  • set aaa parameter [-maxSamlDeflateSize] [-persistentLoginAttempts] [-pwdExpiryNotificationDays]
  • unset aaa parameter [-maxSamlDeflateSize] [-persistentLoginAttempts] [pwdExpiryNotificationDays]
  • show aaa parameter [maxSamlDeflateSize] [persistentLoginAttempts][pwdExpiryNotificationDays]

Command goup: AppFlow

Command:

  • set appflow param [-lsnLogging] [-emailAddress]
  • show appflow param [lsnLogging] [-emailAddress]

Command goup: Application Firewall

Command:

  • bind appfw [-logExpression]
  • unbind appfw profile [-logExpression]
  • show appfw profile [-logExpression] [expression]
  • show appfw xmlerrorpage [-src]
  • show appfw signatures [-src]

Command goup: Audit

Command:

  • add audit syslogAction [-urlFiltering]
  • set audit syslogAction [-urlFiltering]
  • unset audit syslogAction [-urlFiltering]
  • show audit syslogAction [-urlFiltering]
  • add audit nslogAction [-urlFiltering]
  • set audit nslogAction [-urlFiltering]
  • unset audit nslogAction [-urlFiltering]
  • show audit nslogAction [-urlFiltering]
  • set audit syslogParams [-urlFiltering]
  • unset audit syslogParams [-urlFiltering]
  • show audit syslogParams [-urlFiltering]
  • set audit nslogParams [-urlFiltering]
  • unset audit nslogParams [-urlFiltering]
  • show audit nslogParams [-urlFiltering]

Command goup: Authentication

Command:

  • dd authentication radiusAction [-tunnelEndpointClientIP]
  • set authentication radiusAction [-tunnelEndpointClientIP]
  • show authentication radiusAction [-tunnelEndpointClientIP]
  • add authentication ldapAction [-Attributes] [-sshPublicKey] [-email]
  • set authentication ldapAction [-Attributes] [-sshPublicKey] [-pushService] [-email]
  • show authentication ldapAction [-Attributes] [-sshPublicKey] [-pushService] [-email]
  • add authentication samlAction [-groupNameField] [-audience] [-metadataUrl] [-metadataRefreshInterval]
  • set authentication samlAction [-groupNameField] [-audience] [-metadataUrl][-metadataRefreshInterval]
  • show authentication samlAction [-groupNameField] [-audience] [-metadataUrl] [-metadataRefreshInterval] [-metadataImportStatus]
  • add authentication samlIdPProfile [-metadataUrl] [-metadataRefreshInterval]
  • set authentication samlIdPProfile [-metadataUrl] [-metadataRefreshInterval]
  • set authentication samlIdPProfile [-metadataUrl] [-metadataRefreshInterval]
  • show authentication samlIdPProfile [-metadataUrl] [-metadataRefreshInterval][-metadataImportStatus]
  • add authentication OAuthAction [-UserInfoURL] [-CertFilePath] [-grantType]
  • set authentication OAuthAction [-UserInfoURL] [-CertFilePath] [-grantType]
  • show authentication OAuthAction [-UserInfoURL] [-CertFilePath] [-grantType]
  • add authentication OAuthIDPProfile [-relyingPartyMetadataURL] [-refreshInterval][-encryptToken]
  • set authentication OAuthIDPProfile [-relyingPartyMetadataURL] [-refreshInterval][-encryptToken]
  • how authentication OAuthIDPProfile [-relyingPartyMetadataURL] [-refreshInterval][-encryptToken] [-OAuthStatus]

Command goup: Cache Redirection

Command:

  • show cr vserver [-ipset]

Command goup: Content Switching

Command:

  • add cs vserver [-ipset]
  • set cs vserver [-ipset]
  • bind cs vserver [-analyticsProfile]
  • unbind cs vserver [-analyticsProfile]
  • show cs vserver [-ipset] [-analyticsProfile]

Command goup: GSLB

Command:

  • show gslb site [-svcitmnum] [-svcgrnm]
  • bind gslb vserver [-serviceGroupName]
  • unbind gslb vserver [-serviceGroupName]
  • show gslb vserver [-svcitmnum] [-svcgrnm] [-serverName] [-serviceGroupName]
  • show gslb domain [-serviceGroupName]
  • show gslb syncStatus [-summary]
  • add gslb serviceGroup [-sitePersistence]
  • set gslb serviceGroup [-sitePersistence]
  • unset gslb serviceGroup [-sitePersistence]
  • bind gslb serviceGroup [-sitePrefix]
  • show gslb serviceGroup [-sitePersistence] [-sitePrefix]

Command goup: Load Balancing

Command:

  • add lb vserver [-ipset]
  • set lb vserver [-ipset]
  • bind lb vserver [-analyticsProfile]
  • unbind lb vserver [-analyticsProfile]
  • show lb vserver [-ipset] [-analyticsProfile]

Command goup: LSN

Command:

  • add lsn pool [-totalpoolipsbound]
  • bind lsn pool [-ownerNode] [-lastip]
  • unbind lsn pool [-ownerNode] [-firstip] [-lastip]
  • show lsn pool [-ownerNode] [-firstip] [-lastip] [-totalpoolipsbound]
  • add lsn client [-clientType]
  • show lsn client [-clientType]
  • add lsn logprofile [-logipfix]
  • set lsn logprofile [-logipfix]
  • show lsn logprofile [-logipfix]
  • bind lsn appsprofile [-firstport] [-lastport]
  • unbind lsn appsprofile [-firstport] [-lastport]
  • show lsn appsprofile [-firstport] [-lastport]

Command goup: Network

Command:

  • add netProfile [-MBF]
  • set netProfile [-MBF]
  • show netProfile [-MBF]
  • set L3Param [-allowClassEIPv4]
  • show L3Param [-allowClassEIPv4]

Command goup: Network

Command:

  • add ns acl [-type] [-dfdhash] [-stateful]
  • set ns acl [-dfdhash] [-stateful]
  • unset ns acl [-stateful]
  • show ns acl [-type] [-dfdhash] [-stateful]
  • add ns acl6 [-type] [-dfdhash] [-dfdprefix] [-stateful] [-logstate] [-ratelimit]
  • set ns acl6 [-logstate] ratelimit] [-dfdhash] [-dfdprefix] [-stateful]
  • unset ns acl6 [-logstate] [-ratelimit] [-stateful]
  • show ns acl6 [-type] [-logstate] [-ratelimit] [-dfdhash] [-dfdprefix] [-stateful]
  • add ns ip6 [-decrementHopLimit]
  • set ns ip6 [-decrementHopLimit]
  • show ns ip6 [-decrementHopLimit]
  • add ns ip [-decrementTTL]
  • set ns ip [-decrementTTL]
  • show ns ip [-decrementTTL]
  • add ns tcpProfile [-tcpFastOpenCookieSize]
  • set ns tcpProfile [-tcpFastOpenCookieSize]
  • show ns tcpProfile [-tcpFastOpenCookieSize]
  • renumber ns acls [-type]
  • clear ns acls [-type]
  • apply ns acls [-type]
  • show ns license [-isSWGLic] [-RemoteContentInspection]
  • show ns config [-primaryIP6]
  • clear ns acls6 [-type]
  • apply ns acls6 [-type]
  • renumber ns acls6 [-type]
  • show ns feature [-CI]
  • set ns diameter [-ownerNode]
  • show ns diameter [-ownerNode]
  • show ns hardware [-bmcRevision]
  • set ns capacity [-vcpu]
  • unset ns capacity [-vcpu]
  • show ns capacity [-vcpuCount] [-maxVcpuCount]

Command goup: RDP

Command:

  • add rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
  • set rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
  • show rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
  • add rdp serverprofile [-rdpRedirection]
  • set rdp serverprofile [-rdpRedirection]
  • show rdp serverprofile [-rdpRedirection]

Command goup: SSL

Command:

  • show ssl certKey [-ocspBindReferences]
  • add ssl action [-ssllogProfile]
  • show ssl action [-ssllogProfile]
  • add ssl ocspResponder [-ocspUrlResolveTimeout] [-httpMethod]
  • set ssl ocspResponder [-ocspUrlResolveTimeout] [-httpMethod]
  • show ssl ocspResponder [-ocspUrlResolveTimeout] [-httpMethod]
  • create ssl certReq [-subjectAltName]
  • create ssl cert [-subjectAltName]
  • set ssl vserver [-zeroRttEarlyData] [-tls13SessionTicketsPerAuthContext][-dheKeyExchangeWithPsk]
  • show ssl vserver [-zeroRttEarlyData] [-tls13SessionTicketsPerAuthContext][-dheKeyExchangeWithPsk]
  • add ssl profile [-ssllogProfile] [-zeroRttEarlyData] [-tls13SessionTicketsPerAuthContext][-dheKeyExchangeWithPsk]
  • set ssl profile [-ssllogProfile] [-zeroRttEarlyData] [-tls13SessionTicketsPerAuthContext][-dheKeyExchangeWithPsk]
  • show ssl profile [-ssllogProfile] [-zeroRttEarlyData][-tls13SessionTicketsPerAuthContext] [-dheKeyExchangeWithPsk]

Command goup: Stream

Command:

  • add stream identifier [-trackAckOnlyPackets]
  • set stream identifier [-trackAckOnlyPackets]
  • show stream identifier [-trackAckOnlyPackets]

Command goup: System

Command:

  • set system parameter [-allowDefaultPartition] [-reauthOnAuthParamChange][-removeSensitiveFiles]
  • show system parameter [-allowDefaultPartition] [-reauthOnAuthParamChange][-removeSensitiveFiles]

Command goup: Subscriber

Command:

  • add subscriber profile [-vlan]
  • set subscriber profile [-vlan]
  • rm subscriber profile [-vlan]
  • show subscriber profile [-vlan]
  • clear subscriber sessions [-vlan]
  • show subscriber sessions [-vlan]

Command goup: Tunnel

Command:

  • show tunnel trafficPolicy [-piTxBytes] [-piRxBytes] [-piCltTTLB] [-piCltTransactions][-piSvrTTLB] [-piSvrTransactions]

Command goup: User

Command:

  • add user vserver [-state]
  • enable user vserver [-state]
  • disable user vserver [-state]
  • show user vserver [-state]

Command goup: User

Command:

  • bind vpn vserver [-analyticsProfile]
  • unbind vpn vserver [-analyticsProfile]
  • show vpn vserver [-ipset] [-analyticsProfile]
  • show vpn trafficPolicy [-piHits]
  • add vpn samlSSOProfile [-signatureService]
  • set vpn samlSSOProfile [-signatureService]
  • show vpn samlSSOProfile [-signatureService]
  • add vpn url [-appJson]
  • set vpn url [-appJson]
  • show vpn url [-appJson]
  • show vpn sessionPolicy [-piHits]
  • bind vpn global [-certkeyName] [-cacert]
  • unbind vpn global [-certkeyName] [-cacert]
  • show vpn global [-certkeyName] [-cacert] [-crlCheck] [-ocspCheck]
  • set vpn parameter [-backendServerSni] [-backendCertValidation]
  • show vpn parameter [-backendServerSni] [-backendCertValidation][-vpnsessionpolicyBindtype] [-vpnsessionpolicyCount]

New SNMP OIDs

For more information, see the SNMP OID Reference guide.

New and deprecated commands, parameters, and SNMP OIDs