Product Documentation

Upgrade

Feb 16, 2017

Warning

If you are using StorageZones Controller 2.x, you must first upgrade to version 3.0.1, as described in To upgrade to StorageZones Controller 3.0.1 from 2.x. Once you have upgraded to version 3.0.1, you may upgrade directly to the latest version.

When you upgrade a StorageZones Controller to the latest version, that controller will continue to use standard zones. You cannot upgrade a standard zone to a restricted zone.

To replace a standard zone with a restricted zone, you must install a new StorageZones Controller and configure a restricted zone.

Important: Be sure to read the known issues for a release before starting an upgrade.
 
 

If this version is installed:

Do this:

StorageZone Connectors 1.0

StorageZone Connectors 1.0 cannot be upgraded

 

Please uninstall StorageZone Connectors 1.0 and Install the latest StorageZones Controller.

 

Storage Center 1.0

1.       Upgrade Storage Center 1.0 to Storage Center 1.1.

2.       To upgrade to version 1.1, see the Installation section in the archived document Storage Center 1.1.

3.       Verify that Storage Center 1.1 is configured correctly and working before you proceed.

4.       Upgrade Storage Center 1.1 to StorageZones Controller 2.0 Update 1.

5.       Upgrade StorageZones Controller 2.0 Update 1 to StorageZones Controller 3.0.1

6.       Upgrade to the latest StorageZone Controller

Storage Center 1.1

1.       Upgrade Storage Center 1.1 to StorageZones Controller 2.0 Update 1.

2.       Verify that Storage Center 2.0 Update 1 is configured correctly and working before you proceed.

3.       Upgrade StorageZones Controller 2.0 Update 1 to StorageZones Controller 3.0.1

4.       Upgrade to the latest StorageZone Controller

Storage Zones Controller 2.x

1.       Upgrade StorageZone Controller 2.x to StorageZones Controller 3.0.1

2.       Upgrade to the latest StorageZone Controller

StorageZones Controller 3 Beta Program

Please Note: StorageZones Controller 3 is Beta Program Software and had to be a new installation of StorageZones. Otherwise, you may upgrade to the latest StorageZone Controller

StorageZones Controller 3.0.1

Upgrade to the latest StorageZone Controller

StorageZones Controller 3.1

Upgrade to the latest StorageZone Controller

StorageZones Controller 3.2

Upgrade to the latest StorageZone Controller

StorageZones Controller 3.3

Upgrade to the latest StorageZone Controller

StorageZones Controller 3.4

Upgrade to the latest StorageZone Controller

StorageZones Controller 4.x Upgrade to the latest StorageZone Controller

Upgrade StorageZones Controller 3.0.1 or later to the latest version

StorageZones Controller 3.0.1, 3.x, and 4.x can be upgraded directly as described in the following steps.

 

  1. From the ShareFile download page at http://www.citrix.com/downloads/sharefile.html, log on and download the latest StorageZones Controller installer.
    Note: Installing StorageZones Controller changes the Default Web Site on the server to the installation path of the controller.
  2. On the server where you want to upgrade the primary StorageZones Controller:
    1. Run StorageCenter.msi to start the ShareFile StorageZones Controller Setup wizard.
    2. Respond to the prompts.

      When the installation completes, the wizard displays the message “Completed Citrix ShareFile StorageZones Controller Setup Wizard.”

    3. Click Finish.

      The StorageZones Controller console opens.

      Important: If you plan to clone the StorageZones Controller, do not proceed with configuration. Capture the disk image and then configure each StorageZones Controller.

      To return to the StorageZones Controller console at any time, open http://localhost/configservice/login.aspx or start the configuration tool from the Start menu.

      After you click Finish or return to the StorageZones Controller console, the Logon page opens.

    4. To change any of the displayed information, click Modify, make your changes, and then click Save.
  3. Verify the registry settings on the primary StorageZones Controller:

    Not all upgrade paths add the registry settings needed to increase the number of files per zone. To enable that feature, verify that the settings are included in the registry. For details, see Increase the number of files per zone.

  4. On each secondary StorageZones Controller:
    1. Run StorageCenter.msi to start the ShareFile StorageZones Controller Setup wizard.
    2. Respond to the prompts and then click Finish.

      The StorageZones Controller console Logon page opens.

    3. Log on. To change any of the displayed information, click Modify, make your changes, and then click Save.
  5. Restart the IIS server of all zone members.

Upgrade StorageZones Controller 2.x to StorageZones Controller 3.0.1

These steps upgrade standard zones created by prior versions of StorageZones Controller. To use restricted zones, install a new StorageZones Controller.

  1. Back up your primary StorageZones Controller, as described in Back up a primary StorageZones Controller configuration.
  2. From the ShareFile download page at http://www.citrix.com/downloads/sharefile.html, log on and download the latest StorageZones Controller 3 installer.
    Note: Installing StorageZones Controller changes the Default Web Site on the server to the installation path of the controller.
  3. On the server where you want to upgrade the primary StorageZones Controller:
    1. Run StorageCenter.msi to start the ShareFile StorageZones Controller Setup wizard.
    2. Respond to the prompts.

      When the installation completes, the wizard displays the message “Completed Citrix ShareFile StorageZones Controller Setup Wizard.”

    3. Click Finish.

      The StorageZones Controller console opens.

      Important: If you plan to clone the StorageZones Controller, do not proceed with configuration. Capture the disk image and then configure each StorageZones Controller.

      To return to the StorageZones Controller console at any time, open http://localhost/configservice/login.aspx or start the configuration tool from the Start menu.

      After you click Finish or return to the StorageZones Controller console, the Logon page opens.

    4. To change any of the displayed information, click Modify, make your changes, and then click Save.
  4. Verify the registry settings on the primary StorageZones Controller:

    Not all upgrade paths add the registry settings needed to increase the number of files per zone. To enable that feature, verify that the settings are included in the registry. For details, see Increase the number of files per zone.

  5. On each secondary StorageZones Controller:
    1. Run StorageCenter.msi to start the ShareFile StorageZones Controller Setup wizard.
    2. Respond to the prompts and then click Finish.

      The StorageZones Controller console Logon page opens.

    3. Log on. To change any of the displayed information, click Modify, make your changes, and then click Save.
  6. Restart the IIS server of all zone members.
  7. To upgrade to StorageZones Controller 3.4, see To upgrade to StorageZones Controller 3.4 from StorageZones Controller 3.1 or 3.0.1, earlier in this article.
Important: If you are upgrading to StorageZones Controller 3.0.1 from a version prior to 2.2.3 and previously customized the ProducerTimer or DeleteTimer settings, please contact ShareFile Support for help with configuring the ProducerTimerInterval and DeleteTimerInterval settings in FileDeleteService.exe.config.