Change VM Properties
Select a virtual machine in the Resources pane. On the General tab, select the Properties button to view or change the properties of the VM.
On the General Properties tab you can change the VM’s name and description, place it in a folder, and manage its tags.
- To change the VM name, enter a new name in the Name box.
- To change the VM description, enter the new text in the Description box.
- To place the VM in a folder or to move it to a different folder, click Change in the Folder box and choose a folder. For more information, see Using folders.
- To tag and untag the VM and to create and delete tags, see Using tags.
Custom fields allow you to add information to managed resources to make it easier to search and organize them. For more information, see Using custom fields.
On the CPU tab, you can adjust the number of virtual CPUs allocated to the VM, set cores-per-socket for the vCPU, and specify the vCPU priority. Shut down the VM before you modify these settings.
Number of vCPUs (for Windows VMs): To modify the number of virtual CPUs allocated to the VM, change the number in the Number of vCPUs list. To get the best performance out of your VM, ensure the number of vCPUs does not exceed the number of physical CPUs on its host server.
Maximum number of vCPUs (for Linux VMs): To modify the maximum number of virtual CPUs allocated to the VM, change the number in the Maximum Number of vCPUs list. To get the best performance out of your VM, ensure the maximum number of vCPUs does not exceed the number of physical CPUs on its host server.
By default, XenCenter allocates one core per socket for each vCPU. The Topology list displays valid cores-per-socket combinations. Select an option from the list to modify this setting.
Depending on the number of vCPUs you select, XenCenter displays a list of options where the number of vCPUs is divisible by the number of cores per socket. For example, if you specify 8 vCPUs for your VM, the number of cores per socket can only be 1, 2, 4, or 8. If you specify 5 vCPUs, the number of cores per socket can only be 1 or 5.
Current number of vCPUs (for Linux VMs): This list displays the current number of vCPUs allocated to the VM. You can increase the number of vCPUs allocated to the VM even when the VM is running by choosing the required number of vCPUs from the list.
Shut down the VM to decrease the number of vCPUs allocated to the VM.
vCPU priority for this virtual machine
vCPU priority is the priority given to each of the VM’s vCPUs during host CPU scheduling, relative to the other VMs running on the same host server. To adjust the vCPU priority for the VM, move the vCPU slider.
The Citrix Hypervisor templates provide typical VM configurations and set reasonable defaults for the memory, based on the type of guest operating system. Consider the following factors when deciding how much memory you give to a VM:
- The kinds of applications that run on the VM.
- Other virtual machines that use the same memory resource.
- Applications that run on the server alongside the virtual machine.
The available boot options on this tab can vary, depending on the guest operating system. For example, on some VMs, you can change the boot order (or boot sequence), or specify extra boot parameters.
- To change the boot order, select an item in the Boot Order list and select Move Up or Move Down.
- To specify extra boot parameters, enter them in the OS Boot parameters box. For example, on a Debian VM, you can enter single to boot the VM in single-user mode.
On this tab you can adjust the start order, the start delay interval, and the HA restart priority for the selected VM.
Specifies the order in which individual VMs are started up within a vApp or during a high availability recovery operation, allowing certain VMs to be started before others. VMs with a start order value of 0 (zero) are started first, then VMs with a start order value of 1, and so on.
Attempt to start next VM after
This value is a delay interval that specifies how long to wait after the VM starts before starting the next group of VMs in the startup sequence. This setting applies to VMs within a vApp and to individual VMs during a high availability recovery operation.
HA restart priority
In a pool with high availability enabled, this setting specifies which VMs are restarted automatically if the underlying hardware fails or their host server is lost.
- VMs with an HA restart priority of Restart are guaranteed to be restarted if sufficient resources are available within the pool. They are restarted before VMs with a Restart if possible priority.
- VMs with an HA restart priority of Restart if possible are not considered when calculating a failure plan. However, one attempt to restart them is made if a server that is running them fails. This restart is attempted after all higher-priority VMs are restarted, and if the attempt to start them fails, then it will not be retried.
- VMs with an HA restart priority of Do not restart are not restarted automatically.
For more information, see VM startup settings.
On the Alerts tab, you can configure performance alerts for the VM’s CPU usage, network, and disk activity.
For information about configuring alerts, see Configuring performance alerts.
On the Home Server tab of the VM Properties dialog box you can nominate a server which provides resources for the VM. The VM is started up on that server if possible. If it is not possible to start eh VM on that server, an alternate server within the same pool is selected automatically. For more information, see Creating a new VM.
In pools with Workload Balancing (WLB) enabled, you cannot set a home server. Instead, XenCenter nominates the best server for the VM by analyzing Citrix Hypervisor resource pool metrics and recommending optimizations. You can decide if you want these recommendations geared towards resource performance or hardware density. You can fine-tune the weighting of individual resource metrics (CPU, network, memory, and disk) so that the placement recommendations and critical thresholds align with your environment’s needs.
On the VM’s GPU properties tab, you can assign a dedicated graphics processing unit (GPU) or one or more virtual GPUs to a VM. This configuration gives the VM direct access to the graphics hardware. The VM can use the processing power of the GPU, providing better support for high-end 3D professional graphics applications such as CAD/CAM, GIS, and Medical Imaging applications.
In Citrix Hypervisor 8.0 and earlier releases, you can only add one vGPU to a VM. From Citrix Hypervisor 8.1, you can add multiple vGPUs to a VM if your NVIDIA GPU supports this feature and the vGPUs are of the same type.
Click Add to add a GPU to the VM. The GPU type list displays available GPUs and virtual GPU types. Select a virtual GPU type from the list to assign a specific virtual GPU type to the VM. Alternatively, select Pass-through whole GPU to allow a VM to use the full processing power of the GPU.
GPU Virtualization is available for Citrix Hypervisor Premium Edition customers, or customers who have access to Citrix Hypervisor through their Citrix Virtual Apps and Desktops entitlement or Citrix DaaS entitlement. For more information about licensing, see About Citrix Hypervisor Licensing.
On the VM’s USB properties tab, the right side pane displays the list of USBs attached to the VM. You can attach extra (maximum of 6) USBs to the VM. You can also choose to detach USBs from the VM.
For more information, see Tabs.
- USB pass-through is available for Citrix Hypervisor Premium Edition customers.
- USB pass-through is supported for the following USB versions: 1.1, 2.0, and 3.0.
Advanced options (optimization)
On the Advanced Options tab, you can adjust the amount of shadow memory assigned to a hardware-assisted VM. In some specialized application workloads, such as Citrix Virtual Apps, extra shadow memory is required to achieve the full performance. This memory is considered to be overhead, and is separate from the normal memory calculations for accounting memory to a VM.
- To optimize performance for VMs running Citrix Virtual Apps, select Optimize for Citrix Virtual Apps.
- To manually adjust the VM’s shadow memory allocation, select Optimize manually and enter a number in the Shadow memory multiplier box.
- To restore the default settings for the VM’s shadow memory, select the Optimize for general use option.
Shut down the VM before making any updates to the cloud-config parameters.
On the Cloud-Config Parameters tab, you can review and modify the configuration parameters you have specified for the VM. For more information, see Cloud-Config Parameters.