Installing CloudBridge Appliances on the Microsoft Hyper-V Platform
Dec 04, 2013
To install Citrix CloudBridge virtual appliances on Microsoft Windows Server, you must first install Windows Server, with the Hyper-V role enabled, on a machine with adequate system resources. While installing the Hyper-V role, be sure to specify the network interface cards (NICs) on the server that Hyper-V will use to create the virtual networks. You can reserve some NICs for the host. Use Hyper-V Manager to perform the CloudBridge VPX installation.
CloudBridge VPX for Hyper-V is delivered in virtual hard disk (VHD) format. It includes the default configuration for elements such as CPU, network interfaces, and hard-disk size and format. After you install a CloudBridge VPX instance, you can configure its network adapters, add virtual NICs, assign the CloudBridge IP address, subnet mask, and gateway, and complete the basic configuration of the virtual appliance.
Microsoft Server Hardware Requirements
The server’s processor must support Intel Virtualization Technology.
The server must run 64-bit Windows 2008 R2 SP1 (Standard, Enterprise, or DataCenter Editions), or 2012 (Standard or DataCenter Editions) with a full installation (not a Core installation), and the Hyper-V component enabled.
Minimum system configuration is 4 GB RAM, 200 GB hard drive, and 2 physical CPU.
Two physical Ethernet NICs are required; three are recommended.
Download the VPX setup files. If you do not have a My Citrix account, access the home page at http://www.mycitrix.com, click the New Users link, and follow the instructions to create a new My Citrix account.
In Search Downloads by Product, select NetScaler Branch Repeater.
Under Virtual Appliances, select and download the required CloudBridge VPX distribution.
Copy the compressed file to your server.
To configure virtual NICs on the CloudBridge VPX
Log on to the Windows Server as an Administrator, either at a keyboard or VGA console, or through a NIC that you plan to use for managing the virtual appliance (not at one of the ports that you will use for the accelerated bridge).
To start Hyper-V Manager, click Start, point to Administrative Tools, and then click Hyper-V Manager
In the navigation pane, under Hyper-V Manager, select the server on which you want to install CloudBridge VPX.
On the Actions menu, click Virtual Network Manager…
In the Virtual Network Manager window, in the navigation pane, under Virtual Networks, click New virtual network.
Choose External as type of virtual network, and then click Add.
Name the new virtual network as apA Network 1 and select the physical NIC to map it to.
Click OK to apply the changes.
The Apply Networking Changes popup displays a caution indicating that pending changes might disrupt network connectivity. Click Yes.
Repeat steps 5 to 9 for the second accelerated bridge port, but name it as apA Network 2 and connect it to a different physical port.
Click Apply to apply the networking changes.
Installing CloudBridge VPX on Microsoft Server by using Hyper-V Manager
After you have enabled the Hyper-V role on Microsoft Server and extracted the VPX files, you can use Hyper-V Manager to install CloudBridge VPX. After you import the virtual machine, you must configure the virtual NICs by associating them with the virtual networks created by Hyper-V. Based on the Microsoft server you are using, follow the procedure to complete the installation.