After you have
installed the appliance in a rack and connected the cables, verify that the
power cable is properly connected. After verifying the connections, you are
ready to switch on the appliance.
- To switch on
- Verify that the appliance
is connected through a console or Ethernet port, so that you can configure the
appliance after it is switched on.
- Press the ON/OFF toggle
power switch on the appliance.
CloudBridge 2000 appliance for Windows Server, verify
that the LCD on the front panel is backlit and the start message appears
Caution: Be aware of the location of the emergency power off (EPO)
switch, so that if an electrical accident occurs, you can quickly remove power
from the appliance.