Product Documentation

Citrix NetScaler MPX 5550 and MPX 5650

Aug 31, 2016

The Citrix NetScaler models MPX 5550 and MPX 5650 are 1U appliances. Each model has one quad-core processor and 8 gigabytes (GB) of memory.

The following figure shows the front panel of the MPX 5550/5650 appliance.

Figure 1. Citrix NetScaler MPX 5550/5650, front panel


Depending on the model, the appliance has the following ports:

  • RS232 serial console port.
  • Two 10/100/1000Base-T copper Ethernet management ports (RJ45), numbered 0/1 and 0/2 from left to right. The management port is used to connect directly to the appliance for system administration functions.
  • Six 10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, 1/4, 1/5, and 1/6 from left to right.

The following figure shows the back panel of the MPX 5550/5650 appliance.

Figure 2. Citrix NetScaler MPX 5550/5650 appliance, back panel


The following components are visible on the back panel of the MPX 5550/5650 appliance:

  • 160 GB removable solid-state drive, which is used to store the NetScaler software and the user data.
  • Power switch, which turns off power to the appliance, just as if you were to unplug the power supply. Press the switch for five seconds to turn off the power.
  • USB port (reserved for a future release).
  • Non-maskable interrupt (NMI) button, which is used at the request of Technical Support to produce a NetScaler core dump. You must use a pen, pencil, or other pointed object to press this red button, which is recessed to prevent unintentional activation.
  • Single power supply, rated at 300 watts, 110-220 volts.

For information about installing the rails, rack mounting the hardware, and connecting the cables, see "Installing the Hardware."

For information about performing initial configuration of your appliance, see "Initial Configuration."