In environments with multiple untagged VLANs across multiple subnets, a VLAN is configured for each IP subnet. A network interface is bound to one VLAN only. The following figure shows this configuration.
Figure 1. Multiple Subnets with VLANs - No Tagging
To implement the configuration shown in the above figure, perform the following tasks:
- Add VLAN 2.
- Bind the 1/2 network interface of the NetScaler to VLAN 2 as an untagged network interface.
- Bind the IP address and subnet mask to VLAN 2.
For procedures on these tasks, see Creating or Modifying a VLAN.