Product Documentation

Configuring Multiple VLANs with 802.1q Tagging

Sep 01, 2016

For multiple VLANs with 802.1q tagging, each VLAN is configured with a different IP subnet. Each network interface is in one VLAN. One of the VLANs is set up as tagged. The following figure shows this configuration.

Figure 1. Multiple VLANs with IEEE 802.1q Tagging


To implement the configuration shown in the above figure, perform the following tasks:
  1. Add VLAN 2.

    For the procedure to create a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.

  2. Bind the 1/2 network interface of the NetScaler to VLAN 2 as an untagged network interface.

    For the procedure to bind a network interface to a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.

  3. Bind the IP address and netmask to VLAN 2.

    For the procedure to bind an IP address to a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.

  4. Add VLAN 3.

    For the procedure to create a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.

  5. Bind the 1/2 network interface of the NetScaler to VLAN 3 as a tagged network interface.

    For the procedure to bind a network interface to a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.

    For the procedure to bind a tagged network interface, see "Creating or Modifying a VLAN" in Configuring a VLAN.

  6. Bind the IP address and netmask to VLAN 3.

    For the procedure to bind an IP address to a VLAN, see "Creating or Modifying a VLAN" in Configuring a VLAN.