Product Documentation

auditmessageaction

Sep 01, 2016

Configuration for message action resource.

Properties (click to see Operations)

Name Data Type Permissions Description
name
<String>
Read-write
Name of the audit message action. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the message action is added.

The following requirement applies only to the NetScaler CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, ?my message action? or ?my message action?).
Minimum length = 1
loglevel
<String>
Read-write
Audit log level, which specifies the severity level of the log message being generated..
The following loglevels are valid:
* EMERGENCY - Events that indicate an immediate crisis on the server.
* ALERT - Events that might require action.
* CRITICAL - Events that indicate an imminent server crisis.
* ERROR - Events that indicate some type of error.
* WARNING - Events that require action in the near future.
* NOTICE - Events that the administrator should know about.
* INFORMATIONAL - All but low-level events.
* DEBUG - All events, in extreme detail.
Possible values = EMERGENCY, ALERT, CRITICAL, ERROR, WARNING, NOTICE, INFORMATIONAL, DEBUG
stringbuilderexpr
<String>
Read-write
Default-syntax expression that defines the format and content of the log message.
logtonewnslog
<String>
Read-write
Send the message to the new nslog.
Possible values = YES, NO
bypasssafetycheck
<String>
Read-write
Bypass the safety check and allow unsafe expressions.
Default value: NO
Possible values = YES, NO
loglevel1
<String>
Read-only
.
Possible values = ALL, EMERGENCY, ALERT, CRITICAL, ERROR, WARNING, NOTICE, INFORMATIONAL, DEBUG, NONE
hits
<Double>
Read-only
The number of times the action has been taken.
undefhits
<Double>
Read-only
The number of times the action resulted in UNDEF.
referencecount
<Double>
Read-only
The number of references to the action.
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"auditmessageaction":{
      "name":<String_value>,
      "loglevel":<String_value>,
      "stringbuilderexpr":<String_value>,
      "logtonewnslog":<String_value>,
      "bypasssafetycheck":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction/name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"auditmessageaction":{
      "name":<String_value>,
      "loglevel":<String_value>,
      "stringbuilderexpr":<String_value>,
      "logtonewnslog":<String_value>,
      "bypasssafetycheck":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"auditmessageaction":{
      "name":<String_value>,
      "logtonewnslog":true,
      "bypasssafetycheck":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of auditmessageaction resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?pagesize=#no&pageno=#no

Use this query-parameter to get the auditmessageaction resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "auditmessageaction": [ {
      "name":<String_value>,
      "loglevel":<String_value>,
      "loglevel1":<String_value>,
      "stringbuilderexpr":<String_value>,
      "logtonewnslog":<String_value>,
      "bypasssafetycheck":<String_value>,
      "hits":<Double_value>,
      "undefhits":<Double_value>,
      "referencecount":<Double_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction/name_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "auditmessageaction": [ {
      "name":<String_value>,
      "loglevel":<String_value>,
      "loglevel1":<String_value>,
      "stringbuilderexpr":<String_value>,
      "logtonewnslog":<String_value>,
      "bypasssafetycheck":<String_value>,
      "hits":<Double_value>,
      "undefhits":<Double_value>,
      "referencecount":<Double_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/auditmessageaction?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "auditmessageaction": [ { "__count": "#no"} ] }