Product Documentation

lsndeterministicnat

Sep 07, 2016

Configuration for deterministic NAT resource.

Properties (click to see Operations)

Name Data Type Permissions Description
clientname
<String>
Read-write
The name of the LSN Client.
network6
<String>
Read-write
IPv6 address of the LSN subscriber or B4 device.
subscrip
<String>
Read-write
The Client IP address.
td
<Double>
Read-write
The LSN client TD.
Default value: 0
Minimum value = 0
Maximum value = 4094
natip
<String>
Read-write
The NAT IP address.
Minimum length = 1
natprefix
<String>
Read-only
IPv6 address of the LSN subscriber network(B4-Device) on whose traffic the NetScaler ADC perform Large Scale NAT.
subscrip2
<String>
Read-only
The Subscriber IP address.
natip2
<String>
Read-only
The NAT IP address.
firstport
<Integer>
Read-only
The Application Protocol Port of the Profile.
Minimum value = 1
Maximum value = 65535
lastport
<Integer>
Read-only
The Application Protocol Ending Port of the Profile.
Minimum value = 1
Maximum value = 65535
srctd
<Double>
Read-only
The LSN client TD.
Minimum value = 0
Maximum value = 4094
nattype
<String>
Read-only
Type of subscriber info(ex: nat44 or ds-lite).
Default value: NAT44
Possible values = NAT44, DS-Lite, NAT64
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?args=clientname:<String_value>,network6:<String_value>,subscrip:<String_value>,td:<Double_value>,natip:<String_value>

Use this query-parameter to get lsndeterministicnat resources based on additional properties.

attrs

http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsndeterministicnat resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?pagesize=#no&pageno=#no

Use this query-parameter to get the lsndeterministicnat resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "lsndeterministicnat": [ {
clientname:<String_value>,network6:<String_value>,subscrip:<String_value>,td:<Double_value>,natip:<String_value>      "natprefix":<String_value>,
      "subscrip2":<String_value>,
      "natip2":<String_value>,
      "firstport":<Integer_value>,
      "lastport":<Integer_value>,
      "srctd":<Double_value>,
      "nattype":<String_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/lsndeterministicnat?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "lsndeterministicnat": [ { "__count": "#no"} ] }