Product Documentation

lsnstatic

Sep 07, 2016

Configuration for static mapping resource.

Properties (click to see Operations)

Name Data Type Permissions Description
name
<String>
Read-write
Name for the LSN static mapping entry. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN group is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn static1" or 'lsn static1').
Minimum length = 1
Maximum length = 127
transportprotocol
<String>
Read-write
Protocol for the LSN mapping entry.
Possible values = TCP, UDP, ICMP, ALL
subscrip
<String>
Read-write
IPv4(NAT44 & DS-Lite)/IPv6(NAT64) address of an LSN subscriber for the LSN static mapping entry.
subscrport
<Integer>
Read-write
Port of the LSN subscriber for the LSN mapping entry. * represents all ports being used. Used in case of static wildcard.
Minimum value = 0
Maximum value = 65535
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
network6
<String>
Read-write
B4 address in DS-Lite setup.
Minimum length = 1
td
<Double>
Read-write
ID of the traffic domain to which the subscriber belongs.

If you do not specify an ID, the subscriber is assumed to be a part of the default traffic domain.
Default value: 0
Minimum value = 0
Maximum value = 4094
natip
<String>
Read-write
IPv4 address, already existing on the NetScaler ADC as type LSN, to be used as NAT IP address for this mapping entry.
natport
<Integer>
Read-write
NAT port for this LSN mapping entry. * represents all ports being used. Used in case of static wildcard.
Minimum value = 0
Maximum value = 65535
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
destip
<String>
Read-write
Destination IP address for the LSN mapping entry.
dsttd
<Double>
Read-write
ID of the traffic domain through which the destination IP address for this LSN mapping entry is reachable from the NetScaler ADC.

If you do not specify an ID, the destination IP address is assumed to be reachable through the default traffic domain, which has an ID of 0.
Default value: 0
Minimum value = 0
Maximum value = 4094
nattype
<String>
Read-write
Type of sessions to be displayed.
Possible values = NAT44, DS-Lite, NAT64
status
<String>
Read-only
The status of the Mapping. Status could be Inactive, if mapping addition failed due to already existing dynamic/static mapping, port allocation failure.
Possible values = ACTIVE, INACTIVE
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/lsnstatic

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"lsnstatic":{
      "name":<String_value>,
      "transportprotocol":<String_value>,
      "subscrip":<String_value>,
      "subscrport":<Integer_value>,
      "network6":<String_value>,
      "td":<Double_value>,
      "natip":<String_value>,
      "natport":<Integer_value>,
      "destip":<String_value>,
      "dsttd":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/lsnstatic/name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/lsnstatic

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?args=name:<String_value>,nattype:<String_value>

Use this query-parameter to get lsnstatic resources based on additional properties.

attrs

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsnstatic resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?pagesize=#no&pageno=#no

Use this query-parameter to get the lsnstatic resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "lsnstatic": [ {
name:<String_value>,nattype:<String_value>      "transportprotocol":<String_value>,
      "subscrip":<String_value>,
      "subscrport":<Integer_value>,
      "network6":<String_value>,
      "natip":<String_value>,
      "natport":<Integer_value>,
      "td":<Double_value>,
      "destip":<String_value>,
      "dsttd":<Double_value>,
      "status":<String_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/lsnstatic/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/lsnstatic/name_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "lsnstatic": [ {
name:<String_value>,nattype:<String_value>      "transportprotocol":<String_value>,
      "subscrip":<String_value>,
      "subscrport":<Integer_value>,
      "network6":<String_value>,
      "natip":<String_value>,
      "natport":<Integer_value>,
      "td":<Double_value>,
      "destip":<String_value>,
      "dsttd":<Double_value>,
      "status":<String_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/lsnstatic?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "lsnstatic": [ { "__count": "#no"} ] }