Product Documentation

l2param

Sep 07, 2016

Configuration for Layer 2 related parameter resource.

Properties (click to see Operations)

Name Data Type Permissions Description
mbfpeermacupdate
<Double>
Read-write
When mbf_instant_learning is enabled, learn any changes in peer's MAC after this time interval, which is in 10ms ticks.
Default value: 10
maxbridgecollision
<Double>
Read-write
Maximum bridge collision for loop detection .
Default value: 20
bdggrpproxyarp
<String>
Read-write
Set/reset proxy ARP in bridge group deployment.
Default value: ENABLED
Possible values = ENABLED, DISABLED
bdgsetting
<String>
Read-write
Bridging settings for C2C behavior. If enabled, each PE will learn MAC entries independently. Otherwise, when L2 mode is ON, learned MAC entries on a PE will be broadcasted to all other PEs.
Default value: DISABLED
Possible values = ENABLED, DISABLED
garponvridintf
<String>
Read-write
Send GARP messagess on VRID-configured interfaces upon failover .
Default value: ENABLED
Possible values = ENABLED, DISABLED
macmodefwdmypkt
<String>
Read-write
Allows MAC mode vserver to pick and forward the packets even if it is destined to NetScaler owned VIP.
Default value: DISABLED
Possible values = ENABLED, DISABLED
usemymac
<String>
Read-write
Use Netscaler MAC for all outgoing packets.
Default value: DISABLED
Possible values = ENABLED, DISABLED
proxyarp
<String>
Read-write
Proxies the ARP as Netscaler MAC for FreeBSD.
Default value: ENABLED
Possible values = ENABLED, DISABLED
garpreply
<String>
Read-write
Set/reset REPLY form of GARP .
Default value: DISABLED
Possible values = ENABLED, DISABLED
mbfinstlearning
<String>
Read-write
Enable instant learning of MAC changes in MBF mode.
Default value: DISABLED
Possible values = ENABLED, DISABLED
rstintfonhafo
<String>
Read-write
Enable the reset interface upon HA failover.
Default value: DISABLED
Possible values = ENABLED, DISABLED
skipproxyingbsdtraffic
<String>
Read-write
Control source parameters (IP and Port) for FreeBSD initiated traffic. If Enabled, source parameters are retained. Else proxy the source parameters based on next hop.
Default value: DISABLED
Possible values = ENABLED, DISABLED
returntoethernetsender
<String>
Read-write
Return to ethernet sender.
Default value: DISABLED
Possible values = ENABLED, DISABLED
stopmacmoveupdate
<String>
Read-write
Stop Update of server mac change to NAT sessions.
Default value: DISABLED
Possible values = ENABLED, DISABLED

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

update

URL: http://<netscaler-ip-address>/nitro/v1/config/l2param

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"l2param":{
      "mbfpeermacupdate":<Double_value>,
      "maxbridgecollision":<Double_value>,
      "bdggrpproxyarp":<String_value>,
      "bdgsetting":<String_value>,
      "garponvridintf":<String_value>,
      "macmodefwdmypkt":<String_value>,
      "usemymac":<String_value>,
      "proxyarp":<String_value>,
      "garpreply":<String_value>,
      "mbfinstlearning":<String_value>,
      "rstintfonhafo":<String_value>,
      "skipproxyingbsdtraffic":<String_value>,
      "returntoethernetsender":<String_value>,
      "stopmacmoveupdate":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/l2param?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"l2param":{
      "mbfpeermacupdate":true,
      "maxbridgecollision":true,
      "bdggrpproxyarp":true,
      "bdgsetting":true,
      "garponvridintf":true,
      "macmodefwdmypkt":true,
      "usemymac":true,
      "proxyarp":true,
      "garpreply":true,
      "mbfinstlearning":true,
      "rstintfonhafo":true,
      "skipproxyingbsdtraffic":true,
      "returntoethernetsender":true,
      "stopmacmoveupdate":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/l2param

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "l2param": [ {
      "maxbridgecollision":<Double_value>,
      "mbfpeermacupdate":<Double_value>,
      "bdggrpproxyarp":<String_value>,
      "bdgsetting":<String_value>,
      "garponvridintf":<String_value>,
      "macmodefwdmypkt":<String_value>,
      "usemymac":<String_value>,
      "proxyarp":<String_value>,
      "garpreply":<String_value>,
      "mbfinstlearning":<String_value>,
      "rstintfonhafo":<String_value>,
      "skipproxyingbsdtraffic":<String_value>,
      "returntoethernetsender":<String_value>,
      "stopmacmoveupdate":<String_value>
}]}