Product Documentation

nat64param

Sep 07, 2016

Configuration for NAT64 parameter resource.

Properties (click to see Operations)

Name Data Type Permissions Description
td
<Double>
Read-write
Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0
Maximum value = 4094
nat64ignoretos
<String>
Read-write
Ignore TOS.
Default value: NO
Possible values = YES, NO
nat64zerochecksum
<String>
Read-write
Calculate checksum for UDP packets with zero checksum.
Default value: ENABLED
Possible values = ENABLED, DISABLED
nat64v6mtu
<Double>
Read-write
MTU setting for the IPv6 side. If the incoming IPv4 packet greater than this, either fragment or send icmp need fragmentation error.
Default value: 1280
Minimum value = 1280
Maximum value = 9216
nat64fragheader
<String>
Read-write
When disabled, translator will not insert IPv6 fragmentation header for non fragmented IPv4 packets.
Default value: ENABLED
Possible values = ENABLED, DISABLED
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

update

URL: http://<netscaler-ip-address>/nitro/v1/config/nat64param

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nat64param":{
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/nat64param?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nat64param":{
      "td":<Double_value>,
      "nat64ignoretos":true,
      "nat64zerochecksum":true,
      "nat64v6mtu":true,
      "nat64fragheader":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/nat64param

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/nat64param?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/nat64param?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nat64param resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/nat64param?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/nat64param?pagesize=#no&pageno=#no

Use this query-parameter to get the nat64param resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nat64param": [ {
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/nat64param/td_value<Double>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/nat64param/td_value<Double>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/nat64param/td_value<Double>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nat64param": [ {
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/nat64param?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nat64param": [ { "__count": "#no"} ] }