Product Documentation

nd6ravariables

Sep 07, 2016

Configuration for nd6 Router Advertisment configuration variables resource.

Properties (click to see Operations)

Name Data Type Permissions Description
vlan
<Double>
Read-write
The VLAN number.
Minimum value = 0
Maximum value = 4094
ceaserouteradv
<String>
Read-write
Cease router advertisements on this vlan.
Default value: NO
Possible values = YES, NO
sendrouteradv
<String>
Read-write
whether the router sends periodic RAs and responds to Router Solicitations.
Default value: NO
Possible values = YES, NO
srclinklayeraddroption
<String>
Read-write
Include source link layer address option in RA messages.
Default value: YES
Possible values = YES, NO
onlyunicastrtadvresponse
<String>
Read-write
Send only Unicast Router Advertisements in respond to Router Solicitations.
Default value: NO
Possible values = YES, NO
managedaddrconfig
<String>
Read-write
Value to be placed in the Managed address configuration flag field.
Default value: NO
Possible values = YES, NO
otheraddrconfig
<String>
Read-write
Value to be placed in the Other configuration flag field.
Default value: NO
Possible values = YES, NO
currhoplimit
<Double>
Read-write
Current Hop limit.
Default value: 64
Minimum value = 0
Maximum value = 255
maxrtadvinterval
<Double>
Read-write
Maximum time allowed between unsolicited multicast RAs, in seconds.
Default value: 600
Minimum value = 4
Maximum value = 1800
minrtadvinterval
<Double>
Read-write
Minimum time interval between RA messages, in seconds.
Default value: 198
Minimum value = 3
Maximum value = 1350
linkmtu
<Double>
Read-write
The Link MTU.
Default value: 0
Minimum value = 0
Maximum value = 1500
reachabletime
<Double>
Read-write
Reachable time, in milliseconds.
Default value: 0
Minimum value = 0
Maximum value = 3600000
retranstime
<Double>
Read-write
Retransmission time, in milliseconds.
Default value: 0
defaultlifetime
<Integer>
Read-write
Default life time, in seconds.
Default value: 1800
Minimum value = 0
Maximum value = 9000
lastrtadvtime
<Double>
Read-only
Last RA sent timestamp.
nextrtadvdelay
<Double>
Read-only
Next RA delay.
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

update

URL: http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nd6ravariables":{
      "vlan":<Double_value>,
      "ceaserouteradv":<String_value>,
      "sendrouteradv":<String_value>,
      "srclinklayeraddroption":<String_value>,
      "onlyunicastrtadvresponse":<String_value>,
      "managedaddrconfig":<String_value>,
      "otheraddrconfig":<String_value>,
      "currhoplimit":<Double_value>,
      "maxrtadvinterval":<Double_value>,
      "minrtadvinterval":<Double_value>,
      "linkmtu":<Double_value>,
      "reachabletime":<Double_value>,
      "retranstime":<Double_value>,
      "defaultlifetime":<Integer_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nd6ravariables":{
      "vlan":<Double_value>,
      "ceaserouteradv":true,
      "sendrouteradv":true,
      "srclinklayeraddroption":true,
      "onlyunicastrtadvresponse":true,
      "managedaddrconfig":true,
      "otheraddrconfig":true,
      "currhoplimit":true,
      "maxrtadvinterval":true,
      "minrtadvinterval":true,
      "linkmtu":true,
      "reachabletime":true,
      "retranstime":true,
      "defaultlifetime":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nd6ravariables resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?pagesize=#no&pageno=#no

Use this query-parameter to get the nd6ravariables resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nd6ravariables": [ {
      "vlan":<Double_value>,
      "ceaserouteradv":<String_value>,
      "sendrouteradv":<String_value>,
      "srclinklayeraddroption":<String_value>,
      "onlyunicastrtadvresponse":<String_value>,
      "managedaddrconfig":<String_value>,
      "otheraddrconfig":<String_value>,
      "currhoplimit":<Double_value>,
      "maxrtadvinterval":<Double_value>,
      "minrtadvinterval":<Double_value>,
      "linkmtu":<Double_value>,
      "reachabletime":<Double_value>,
      "retranstime":<Double_value>,
      "defaultlifetime":<Integer_value>,
      "lastrtadvtime":<Double_value>,
      "nextrtadvdelay":<Double_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables/vlan_value<Double>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables/vlan_value<Double>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables/vlan_value<Double>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nd6ravariables": [ {
      "vlan":<Double_value>,
      "ceaserouteradv":<String_value>,
      "sendrouteradv":<String_value>,
      "srclinklayeraddroption":<String_value>,
      "onlyunicastrtadvresponse":<String_value>,
      "managedaddrconfig":<String_value>,
      "otheraddrconfig":<String_value>,
      "currhoplimit":<Double_value>,
      "maxrtadvinterval":<Double_value>,
      "minrtadvinterval":<Double_value>,
      "linkmtu":<Double_value>,
      "reachabletime":<Double_value>,
      "retranstime":<Double_value>,
      "defaultlifetime":<Integer_value>,
      "lastrtadvtime":<Double_value>,
      "nextrtadvdelay":<Double_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/nd6ravariables?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nd6ravariables": [ { "__count": "#no"} ] }