Product Documentation

onlinkipv6prefix

Sep 07, 2016

Configuration for on-link IPv6 global prefixes for Router Advertisment resource.

Properties (click to see Operations)

Name Data Type Permissions Description
ipv6prefix
<String>
Read-write
Onlink prefixes for RA messages.
onlinkprefix
<String>
Read-write
RA Prefix onlink flag.
Default value: YES
Possible values = YES, NO
autonomusprefix
<String>
Read-write
RA Prefix Autonomus flag.
Default value: YES
Possible values = YES, NO
depricateprefix
<String>
Read-write
Depricate the prefix.
Default value: NO
Possible values = YES, NO
decrementprefixlifetimes
<String>
Read-write
RA Prefix Autonomus flag.
Default value: NO
Possible values = YES, NO
prefixvalidelifetime
<Double>
Read-write
Valide life time of the prefix, in seconds.
Default value: 2592000
prefixpreferredlifetime
<Double>
Read-write
Preferred life time of the prefix, in seconds.
Default value: 604800
prefixcurrvalidelft
<Double>
Read-only
Prefix current valid life time.
prefixcurrpreferredlft
<Double>
Read-only
Prefix current prefered life time.
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"onlinkipv6prefix":{
      "ipv6prefix":<String_value>,
      "onlinkprefix":<String_value>,
      "autonomusprefix":<String_value>,
      "depricateprefix":<String_value>,
      "decrementprefixlifetimes":<String_value>,
      "prefixvalidelifetime":<Double_value>,
      "prefixpreferredlifetime":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix/ipv6prefix_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"onlinkipv6prefix":{
      "ipv6prefix":<String_value>,
      "onlinkprefix":<String_value>,
      "autonomusprefix":<String_value>,
      "depricateprefix":<String_value>,
      "decrementprefixlifetimes":<String_value>,
      "prefixvalidelifetime":<Double_value>,
      "prefixpreferredlifetime":<Double_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"onlinkipv6prefix":{
      "ipv6prefix":<String_value>,
      "onlinkprefix":true,
      "autonomusprefix":true,
      "depricateprefix":true,
      "decrementprefixlifetimes":true,
      "prefixvalidelifetime":true,
      "prefixpreferredlifetime":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of onlinkipv6prefix resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?pagesize=#no&pageno=#no

Use this query-parameter to get the onlinkipv6prefix resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "onlinkipv6prefix": [ {
      "ipv6prefix":<String_value>,
      "onlinkprefix":<String_value>,
      "autonomusprefix":<String_value>,
      "depricateprefix":<String_value>,
      "decrementprefixlifetimes":<String_value>,
      "prefixvalidelifetime":<Double_value>,
      "prefixpreferredlifetime":<Double_value>,
      "prefixcurrvalidelft":<Double_value>,
      "prefixcurrpreferredlft":<Double_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix/ipv6prefix_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix/ipv6prefix_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix/ipv6prefix_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "onlinkipv6prefix": [ {
      "ipv6prefix":<String_value>,
      "onlinkprefix":<String_value>,
      "autonomusprefix":<String_value>,
      "depricateprefix":<String_value>,
      "decrementprefixlifetimes":<String_value>,
      "prefixvalidelifetime":<Double_value>,
      "prefixpreferredlifetime":<Double_value>,
      "prefixcurrvalidelft":<Double_value>,
      "prefixcurrpreferredlft":<Double_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/onlinkipv6prefix?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "onlinkipv6prefix": [ { "__count": "#no"} ] }