Product Documentation

nsconfig

Sep 07, 2016

Configuration for system config resource.

Properties (click to see Operations)

Name Data Type Permissions Description
force
<Boolean>
Read-write
Configurations will be cleared without prompting for confirmation.
level
<String>
Read-write
Types of configurations to be cleared.
* basic: Clears all configurations except the following:
- NSIP, default route (gateway), MIPs, and SNIPs
- Network settings (DG, VLAN, RHI and DNS settings)
- Cluster settings
- HA node definitions
- Feature and mode settings
- nsroot password
* extended: Clears the same configurations as the 'basic' option. In addition, it clears the nsroot password and feature and mode settings.
* full: Clears all configurations except NSIP, default route, and interface settings.
Note: When you clear the configurations through the cluster IP address, by specifying the level as 'full', the cluster is deleted and all cluster nodes become standalone appliances. The 'basic' and 'extended' levels are propagated to the cluster nodes.
Possible values = basic, extended, full
rbaconfig
<String>
Read-write
RBA configurations will not be cleared if RBA is set to NO.This option is applicable only for BASIC level of clear configuration.Default is YES, which will clear rba configurations.
Default value: YES
Possible values = YES, NO
ipaddress
<String>
Read-write
IP address of the NetScaler appliance. Commonly referred to as NSIP address. This parameter is mandatory to bring up the appliance.
Minimum length = 1
netmask
<String>
Read-write
Netmask corresponding to the IP address. This parameter is mandatory to bring up the appliance.
nsvlan
<Double>
Read-write
VLAN (NSVLAN) for the subnet on which the IP address resides.
Minimum value = 2
Maximum value = 4094
ifnum
<String[]>
Read-write
Interfaces of the appliances that must be bound to the NSVLAN.
Minimum length = 1
tagged
<String>
Read-write
Specifies that the interfaces will be added as 802.1q tagged interfaces. Packets sent on these interface on this VLAN will have an additional 4-byte 802.1q tag which identifies the VLAN.
To use 802.1q tagging, the switch connected to the appliance's interfaces must also be configured for tagging.
Default value: YES
Possible values = YES, NO
httpport
<Integer[]>
Read-write
The HTTP ports on the Web server. This allows the system to perform connection off-load for any client request that has a destination port matching one of these configured ports.
Minimum value = 1
maxconn
<Double>
Read-write
The maximum number of connections that will be made from the system to the web server(s) attached to it. The value entered here is applied globally to all attached servers.
Minimum value = 0
Maximum value = 4294967294
maxreq
<Double>
Read-write
The maximum number of requests that the system can pass on a particular connection between the system and a server attached to it. Setting this value to 0 allows an unlimited number of requests to be passed.
Minimum value = 0
Maximum value = 65535
cip
<String>
Read-write
The option to control (enable or disable) the insertion of the actual client IP address into the HTTP header request passed from the client to one, some, or all servers attached to the system.
The passed address can then be accessed through a minor modification to the server.
l If cipHeader is specified, it will be used as the client IP header.
l If it is not specified, then the value that has been set by the set ns config CLI command will be used as the client IP header.
Possible values = ENABLED, DISABLED
cipheader
<String>
Read-write
The text that will be used as the client IP header.
Minimum length = 1
cookieversion
<String>
Read-write
The version of the cookie inserted by system.
Possible values = 0, 1
securecookie
<String>
Read-write
enable/disable secure flag for persistence cookie.
Default value: ENABLED
Possible values = ENABLED, DISABLED
pmtumin
<Double>
Read-write
The minimum Path MTU.
Default value: 576
Minimum value = 168
Maximum value = 1500
pmtutimeout
<Double>
Read-write
The timeout value in minutes.
Default value: 10
Minimum value = 1
Maximum value = 1440
ftpportrange
<String>
Read-write
Port range configured for FTP services.
Minimum length = 1024
Maximum length = 64000
crportrange
<String>
Read-write
Port range for cache redirection services.
Minimum length = 1
Maximum length = 65535
timezone
<String>
Read-write
Name of the timezone.
Possible values = CoordinatedUniversalTime, GMT+01:00-CET-Europe/Andorra, GMT+04:00-GST-Asia/Dubai, GMT+04:30-AFT-Asia/Kabul, GMT-04:00-AST-America/Antigua, GMT-04:00-AST-America/Anguilla, GMT+01:00-CET-Europe/Tirane, GMT+04:00-AMT-Asia/Yerevan, GMT+01:00-WAT-Africa/Luanda, GMT+13:00-NZDT-Antarctica/McMurdo, GMT+13:00-NZDT-Antarctica/South_Pole, GMT-03:00-ROTT-Antarctica/Rothera, GMT-04:00-CLT-Antarctica/Palmer, GMT+05:00-MAWT-Antarctica/Mawson, GMT+07:00-DAVT-Antarctica/Davis, GMT+08:00-WST-Antarctica/Casey, GMT+06:00-VOST-Antarctica/Vostok, GMT+10:00-DDUT-Antarctica/DumontDUrville, GMT+03:00-SYOT-Antarctica/Syowa, GMT+11:00-MIST-Antarctica/Macquarie, GMT-03:00-ART-America/Argentina/Buenos_Aires, GMT-03:00-ART-America/Argentina/Cordoba, GMT-03:00-ART-America/Argentina/Salta, GMT-03:00-ART-America/Argentina/Jujuy, GMT-03:00-ART-America/Argentina/Tucuman, GMT-03:00-ART-America/Argentina/Catamarca, GMT-03:00-ART-America/Argentina/La_Rioja, GMT-03:00-ART-America/Argentina/San_Juan, GMT-03:00-ART-America/Argentina/Mendoza, GMT-03:00-WARST-America/Argentina/San_Luis, GMT-03:00-ART-America/Argentina/Rio_Gallegos, GMT-03:00-ART-America/Argentina/Ushuaia, GMT-11:00-SST-Pacific/Pago_Pago, GMT+01:00-CET-Europe/Vienna, GMT+11:00-LHST-Australia/Lord_Howe, GMT+11:00-EST-Australia/Hobart, GMT+11:00-EST-Australia/Currie, GMT+11:00-EST-Australia/Melbourne, GMT+11:00-EST-Australia/Sydney, GMT+10:30-CST-Australia/Broken_Hill, GMT+10:00-EST-Australia/Brisbane, GMT+10:00-EST-Australia/Lindeman, GMT+10:30-CST-Australia/Adelaide, GMT+09:30-CST-Australia/Darwin, GMT+08:00-WST-Australia/Perth, GMT+08:45-CWST-Australia/Eucla, GMT-04:00-AST-America/Aruba, GMT+02:00-EET-Europe/Mariehamn, GMT+04:00-AZT-Asia/Baku, GMT+01:00-CET-Europe/Sarajevo, GMT-04:00-AST-America/Barbados, GMT+06:00-BDT-Asia/Dhaka, GMT+01:00-CET-Europe/Brussels, GMT+00:00-GMT-Africa/Ouagadougou, GMT+02:00-EET-Europe/Sofia, GMT+03:00-AST-Asia/Bahrain, GMT+02:00-CAT-Africa/Bujumbura, GMT+01:00-WAT-Africa/Porto-Novo, GMT-04:00-AST-America/St_Barthelemy, GMT-03:00-ADT-Atlantic/Bermuda, GMT+08:00-BNT-Asia/Brunei, GMT-04:00-BOT-America/La_Paz, GMT-02:00-FNT-America/Noronha, GMT-03:00-BRT-America/Belem, GMT-03:00-BRT-America/Fortaleza, GMT-03:00-BRT-America/Recife, GMT-03:00-BRT-America/Araguaina, GMT-03:00-BRT-America/Maceio, GMT-03:00-BRT-America/Bahia, GMT-03:00-BRT-America/Sao_Paulo, GMT-04:00-AMT-America/Campo_Grande, GMT-04:00-AMT-America/Cuiaba, GMT-03:00-BRT-America/Santarem, GMT-04:00-AMT-America/Porto_Velho, GMT-04:00-AMT-America/Boa_Vista, GMT-04:00-AMT-America/Manaus, GMT-04:00-AMT-America/Eirunepe, GMT-04:00-AMT-America/Rio_Branco, GMT-04:00-EDT-America/Nassau, GMT+06:00-BTT-Asia/Thimphu, GMT+02:00-CAT-Africa/Gaborone, GMT+03:00-FET-Europe/Minsk, GMT-06:00-CST-America/Belize, GMT-02:30-NDT-America/St_Johns, GMT-03:00-ADT-America/Halifax, GMT-03:00-ADT-America/Glace_Bay, GMT-03:00-ADT-America/Moncton, GMT-03:00-ADT-America/Goose_Bay, GMT-04:00-AST-America/Blanc-Sablon, GMT-04:00-EDT-America/Montreal, GMT-04:00-EDT-America/Toronto, GMT-04:00-EDT-America/Nipigon, GMT-04:00-EDT-America/Thunder_Bay, GMT-04:00-EDT-America/Iqaluit, GMT-04:00-EDT-America/Pangnirtung, GMT-05:00-CDT-America/Resolute, GMT-05:00-EST-America/Atikokan, GMT-05:00-CDT-America/Rankin_Inlet, GMT-05:00-CDT-America/Winnipeg, GMT-05:00-CDT-America/Rainy_River, GMT-06:00-CST-America/Regina, GMT-06:00-CST-America/Swift_Current, GMT-06:00-MDT-America/Edmonton, GMT-06:00-MDT-America/Cambridge_Bay, GMT-06:00-MDT-America/Yellowknife, GMT-06:00-MDT-America/Inuvik, GMT-07:00-MST-America/Dawson_Creek, GMT-07:00-PDT-America/Vancouver, GMT-07:00-PDT-America/Whitehorse, GMT-07:00-PDT-America/Dawson, GMT+06:30-CCT-Indian/Cocos, GMT+01:00-WAT-Africa/Kinshasa, GMT+02:00-CAT-Africa/Lubumbashi, GMT+01:00-WAT-Africa/Bangui, GMT+01:00-WAT-Africa/Brazzaville, GMT+01:00-CET-Europe/Zurich, GMT+00:00-GMT-Africa/Abidjan, GMT-10:00-CKT-Pacific/Rarotonga, GMT-04:00-CLT-America/Santiago, GMT-06:00-EAST-Pacific/Easter, GMT+01:00-WAT-Africa/Douala, GMT+08:00-CST-Asia/Shanghai, GMT+08:00-CST-Asia/Harbin, GMT+08:00-CST-Asia/Chongqing, GMT+08:00-CST-Asia/Urumqi, GMT+08:00-CST-Asia/Kashgar, GMT-05:00-COT-America/Bogota, GMT-06:00-CST-America/Costa_Rica, GMT-04:00-CDT-America/Havana, GMT-01:00-CVT-Atlantic/Cape_Verde, GMT+07:00-CXT-Indian/Christmas, GMT+02:00-EET-Asia/Nicosia, GMT+01:00-CET-Europe/Prague, GMT+01:00-CET-Europe/Berlin, GMT+03:00-EAT-Africa/Djibouti, GMT+01:00-CET-Europe/Copenhagen, GMT-04:00-AST-America/Dominica, GMT-04:00-AST-America/Santo_Domingo, GMT+01:00-CET-Africa/Algiers, GMT-05:00-ECT-America/Guayaquil, GMT-06:00-GALT-Pacific/Galapagos, GMT+02:00-EET-Europe/Tallinn, GMT+02:00-EET-Africa/Cairo, GMT+00:00-WET-Africa/El_Aaiun, GMT+03:00-EAT-Africa/Asmara, GMT+01:00-CET-Europe/Madrid, GMT+01:00-CET-Africa/Ceuta, GMT+00:00-WET-Atlantic/Canary, GMT+03:00-EAT-Africa/Addis_Ababa, GMT+02:00-EET-Europe/Helsinki, GMT+12:00-FJT-Pacific/Fiji, GMT-03:00-FKST-Atlantic/Stanley, GMT+10:00-CHUT-Pacific/Chuuk, GMT+11:00-PONT-Pacific/Pohnpei, GMT+11:00-KOST-Pacific/Kosrae, GMT+00:00-WET-Atlantic/Faroe, GMT+01:00-CET-Europe/Paris, GMT+01:00-WAT-Africa/Libreville, GMT+00:00-GMT-Europe/London, GMT-04:00-AST-America/Grenada, GMT+04:00-GET-Asia/Tbilisi, GMT-03:00-GFT-America/Cayenne, GMT+00:00-GMT-Europe/Guernsey, GMT+00:00-GMT-Africa/Accra, GMT+01:00-CET-Europe/Gibraltar, GMT-03:00-WGT-America/Godthab, GMT+00:00-GMT-America/Danmarkshavn, GMT-01:00-EGT-America/Scoresbysund, GMT-03:00-ADT-America/Thule, GMT+00:00-GMT-Africa/Banjul, GMT+00:00-GMT-Africa/Conakry, GMT-04:00-AST-America/Guadeloupe, GMT+01:00-WAT-Africa/Malabo, GMT+02:00-EET-Europe/Athens, GMT-02:00-GST-Atlantic/South_Georgia, GMT-06:00-CST-America/Guatemala, GMT+10:00-ChST-Pacific/Guam, GMT+00:00-GMT-Africa/Bissau, GMT-04:00-GYT-America/Guyana, GMT+08:00-HKT-Asia/Hong_Kong, GMT-06:00-CST-America/Tegucigalpa, GMT+01:00-CET-Europe/Zagreb, GMT-05:00-EST-America/Port-au-Prince, GMT+01:00-CET-Europe/Budapest, GMT+07:00-WIT-Asia/Jakarta, GMT+07:00-WIT-Asia/Pontianak, GMT+08:00-CIT-Asia/Makassar, GMT+09:00-EIT-Asia/Jayapura, GMT+00:00-GMT-Europe/Dublin, GMT+02:00-IST-Asia/Jerusalem, GMT+00:00-GMT-Europe/Isle_of_Man, GMT+05:30-IST-Asia/Kolkata, GMT+06:00-IOT-Indian/Chagos, GMT+03:00-AST-Asia/Baghdad, GMT+03:30-IRST-Asia/Tehran, GMT+00:00-GMT-Atlantic/Reykjavik, GMT+01:00-CET-Europe/Rome, GMT+00:00-GMT-Europe/Jersey, GMT-05:00-EST-America/Jamaica, GMT+02:00-EET-Asia/Amman, GMT+09:00-JST-Asia/Tokyo, GMT+03:00-EAT-Africa/Nairobi, GMT+06:00-KGT-Asia/Bishkek, GMT+07:00-ICT-Asia/Phnom_Penh, GMT+12:00-GILT-Pacific/Tarawa, GMT+13:00-PHOT-Pacific/Enderbury, GMT+14:00-LINT-Pacific/Kiritimati, GMT+03:00-EAT-Indian/Comoro, GMT-04:00-AST-America/St_Kitts, GMT+09:00-KST-Asia/Pyongyang, GMT+09:00-KST-Asia/Seoul, GMT+03:00-AST-Asia/Kuwait, GMT-05:00-EST-America/Cayman, GMT+06:00-ALMT-Asia/Almaty, GMT+06:00-QYZT-Asia/Qyzylorda, GMT+05:00-AQTT-Asia/Aqtobe, GMT+05:00-AQTT-Asia/Aqtau, GMT+05:00-ORAT-Asia/Oral, GMT+07:00-ICT-Asia/Vientiane, GMT+02:00-EET-Asia/Beirut, GMT-04:00-AST-America/St_Lucia, GMT+01:00-CET-Europe/Vaduz, GMT+05:30-IST-Asia/Colombo, GMT+00:00-GMT-Africa/Monrovia, GMT+02:00-SAST-Africa/Maseru, GMT+02:00-EET-Europe/Vilnius, GMT+01:00-CET-Europe/Luxembourg, GMT+02:00-EET-Europe/Riga, GMT+02:00-EET-Africa/Tripoli, GMT+00:00-WET-Africa/Casablanca, GMT+01:00-CET-Europe/Monaco, GMT+02:00-EET-Europe/Chisinau, GMT+01:00-CET-Europe/Podgorica, GMT-04:00-AST-America/Marigot, GMT+03:00-EAT-Indian/Antananarivo, GMT+12:00-MHT-Pacific/Majuro, GMT+12:00-MHT-Pacific/Kwajalein, GMT+01:00-CET-Europe/Skopje, GMT+00:00-GMT-Africa/Bamako, GMT+06:30-MMT-Asia/Rangoon, GMT+08:00-ULAT-Asia/Ulaanbaatar, GMT+07:00-HOVT-Asia/Hovd, GMT+08:00-CHOT-Asia/Choibalsan, GMT+08:00-CST-Asia/Macau, GMT+10:00-ChST-Pacific/Saipan, GMT-04:00-AST-America/Martinique, GMT+00:00-GMT-Africa/Nouakchott, GMT-04:00-AST-America/Montserrat, GMT+01:00-CET-Europe/Malta, GMT+04:00-MUT-Indian/Mauritius, GMT+05:00-MVT-Indian/Maldives, GMT+02:00-CAT-Africa/Blantyre, GMT-06:00-CST-America/Mexico_City, GMT-06:00-CST-America/Cancun, GMT-06:00-CST-America/Merida, GMT-06:00-CST-America/Monterrey, GMT-05:00-CDT-America/Matamoros, GMT-07:00-MST-America/Mazatlan, GMT-07:00-MST-America/Chihuahua, GMT-06:00-MDT-America/Ojinaga, GMT-07:00-MST-America/Hermosillo, GMT-07:00-PDT-America/Tijuana, GMT-08:00-PST-America/Santa_Isabel, GMT-06:00-CST-America/Bahia_Banderas, GMT+08:00-MYT-Asia/Kuala_Lumpur, GMT+08:00-MYT-Asia/Kuching, GMT+02:00-CAT-Africa/Maputo, GMT+02:00-WAST-Africa/Windhoek, GMT+11:00-NCT-Pacific/Noumea, GMT+01:00-WAT-Africa/Niamey, GMT+11:30-NFT-Pacific/Norfolk, GMT+01:00-WAT-Africa/Lagos, GMT-06:00-CST-America/Managua, GMT+01:00-CET-Europe/Amsterdam, GMT+01:00-CET-Europe/Oslo, GMT+05:45-NPT-Asia/Kathmandu, GMT+12:00-NRT-Pacific/Nauru, GMT-11:00-NUT-Pacific/Niue, GMT+13:00-NZDT-Pacific/Auckland, GMT+13:45-CHADT-Pacific/Chatham, GMT+04:00-GST-Asia/Muscat, GMT-05:00-EST-America/Panama, GMT-05:00-PET-America/Lima, GMT-10:00-TAHT-Pacific/Tahiti, GMT-09:30-MART-Pacific/Marquesas, GMT-09:00-GAMT-Pacific/Gambier, GMT+10:00-PGT-Pacific/Port_Moresby, GMT+08:00-PHT-Asia/Manila, GMT+05:00-PKT-Asia/Karachi, GMT+01:00-CET-Europe/Warsaw, GMT-02:00-PMDT-America/Miquelon, GMT-08:00-PST-Pacific/Pitcairn, GMT-04:00-AST-America/Puerto_Rico, GMT+02:00-EET-Asia/Gaza, GMT+02:00-EET-Asia/Hebron, GMT+00:00-WET-Europe/Lisbon, GMT+00:00-WET-Atlantic/Madeira, GMT-01:00-AZOT-Atlantic/Azores, GMT+09:00-PWT-Pacific/Palau, GMT-03:00-PYST-America/Asuncion, GMT+03:00-AST-Asia/Qatar, GMT+04:00-RET-Indian/Reunion, GMT+02:00-EET-Europe/Bucharest, GMT+01:00-CET-Europe/Belgrade, GMT+03:00-FET-Europe/Kaliningrad, GMT+04:00-MSK-Europe/Moscow, GMT+04:00-VOLT-Europe/Volgograd, GMT+04:00-SAMT-Europe/Samara, GMT+06:00-YEKT-Asia/Yekaterinburg, GMT+07:00-OMST-Asia/Omsk, GMT+07:00-NOVT-Asia/Novosibirsk, GMT+07:00-NOVT-Asia/Novokuznetsk, GMT+08:00-KRAT-Asia/Krasnoyarsk, GMT+09:00-IRKT-Asia/Irkutsk, GMT+10:00-YAKT-Asia/Yakutsk, GMT+11:00-VLAT-Asia/Vladivostok, GMT+11:00-SAKT-Asia/Sakhalin, GMT+12:00-MAGT-Asia/Magadan, GMT+12:00-PETT-Asia/Kamchatka, GMT+12:00-ANAT-Asia/Anadyr, GMT+02:00-CAT-Africa/Kigali, GMT+03:00-AST-Asia/Riyadh, GMT+11:00-SBT-Pacific/Guadalcanal, GMT+04:00-SCT-Indian/Mahe, GMT+03:00-EAT-Africa/Khartoum, GMT+01:00-CET-Europe/Stockholm, GMT+08:00-SGT-Asia/Singapore, GMT+00:00-GMT-Atlantic/St_Helena, GMT+01:00-CET-Europe/Ljubljana, GMT+01:00-CET-Arctic/Longyearbyen, GMT+01:00-CET-Europe/Bratislava, GMT+00:00-GMT-Africa/Freetown, GMT+01:00-CET-Europe/San_Marino, GMT+00:00-GMT-Africa/Dakar, GMT+03:00-EAT-Africa/Mogadishu, GMT-03:00-SRT-America/Paramaribo, GMT+00:00-GMT-Africa/Sao_Tome, GMT-06:00-CST-America/El_Salvador, GMT+02:00-EET-Asia/Damascus, GMT+02:00-SAST-Africa/Mbabane, GMT-04:00-EDT-America/Grand_Turk, GMT+01:00-WAT-Africa/Ndjamena, GMT+05:00-TFT-Indian/Kerguelen, GMT+00:00-GMT-Africa/Lome, GMT+07:00-ICT-Asia/Bangkok, GMT+05:00-TJT-Asia/Dushanbe, GMT-10:00-TKT-Pacific/Fakaofo, GMT+09:00-TLT-Asia/Dili, GMT+05:00-TMT-Asia/Ashgabat, GMT+01:00-CET-Africa/Tunis, GMT+13:00-TOT-Pacific/Tongatapu, GMT+02:00-EET-Europe/Istanbul, GMT-04:00-AST-America/Port_of_Spain, GMT+12:00-TVT-Pacific/Funafuti, GMT+08:00-CST-Asia/Taipei, GMT+03:00-EAT-Africa/Dar_es_Salaam, GMT+02:00-EET-Europe/Kiev, GMT+02:00-EET-Europe/Uzhgorod, GMT+02:00-EET-Europe/Zaporozhye, GMT+02:00-EET-Europe/Simferopol, GMT+03:00-EAT-Africa/Kampala, GMT-10:00-HST-Pacific/Johnston, GMT-11:00-SST-Pacific/Midway, GMT+12:00-WAKT-Pacific/Wake, GMT-04:00-EDT-America/New_York, GMT-04:00-EDT-America/Detroit, GMT-04:00-EDT-America/Kentucky/Louisville, GMT-04:00-EDT-America/Kentucky/Monticello, GMT-04:00-EDT-America/Indiana/Indianapolis, GMT-04:00-EDT-America/Indiana/Vincennes, GMT-04:00-EDT-America/Indiana/Winamac, GMT-04:00-EDT-America/Indiana/Marengo, GMT-04:00-EDT-America/Indiana/Petersburg, GMT-04:00-EDT-America/Indiana/Vevay, GMT-05:00-CDT-America/Chicago, GMT-05:00-CDT-America/Indiana/Tell_City, GMT-05:00-CDT-America/Indiana/Knox, GMT-05:00-CDT-America/Menominee, GMT-05:00-CDT-America/North_Dakota/Center, GMT-05:00-CDT-America/North_Dakota/New_Salem, GMT-05:00-CDT-America/North_Dakota/Beulah, GMT-06:00-MDT-America/Denver, GMT-06:00-MDT-America/Boise, GMT-06:00-MDT-America/Shiprock, GMT-07:00-MST-America/Phoenix, GMT-07:00-PDT-America/Los_Angeles, GMT-08:00-AKDT-America/Anchorage, GMT-08:00-AKDT-America/Juneau, GMT-08:00-AKDT-America/Sitka, GMT-08:00-AKDT-America/Yakutat, GMT-08:00-AKDT-America/Nome, GMT-09:00-HADT-America/Adak, GMT-08:00-MeST-America/Metlakatla, GMT-10:00-HST-Pacific/Honolulu, GMT-03:00-UYT-America/Montevideo, GMT+05:00-UZT-Asia/Samarkand, GMT+05:00-UZT-Asia/Tashkent, GMT+01:00-CET-Europe/Vatican, GMT-04:00-AST-America/St_Vincent, GMT-04:30-VET-America/Caracas, GMT-04:00-AST-America/Tortola, GMT-04:00-AST-America/St_Thomas, GMT+07:00-ICT-Asia/Ho_Chi_Minh, GMT+11:00-VUT-Pacific/Efate, GMT+12:00-WFT-Pacific/Wallis, GMT+14:00-WSDT-Pacific/Apia, GMT+03:00-AST-Asia/Aden, GMT+03:00-EAT-Indian/Mayotte, GMT+02:00-SAST-Africa/Johannesburg, GMT+02:00-CAT-Africa/Lusaka, GMT+02:00-CAT-Africa/Harare
grantquotamaxclient
<Double>
Read-write
The percentage of shared quota to be granted at a time for maxClient.
Default value: 10
Minimum value = 0
Maximum value = 100
exclusivequotamaxclient
<Double>
Read-write
The percentage of maxClient to be given to PEs.
Default value: 80
Minimum value = 0
Maximum value = 100
grantquotaspillover
<Double>
Read-write
The percentage of shared quota to be granted at a time for spillover.
Default value: 10
Minimum value = 0
Maximum value = 100
exclusivequotaspillover
<Double>
Read-write
The percentage of max limit to be given to PEs.
Default value: 80
Minimum value = 0
Maximum value = 100
config1
<String>
Read-write
Location of the configurations.
config2
<String>
Read-write
Location of the configurations.
outtype
<String>
Read-write
Format to display the difference in configurations.
Possible values = cli, xml
template
<Boolean>
Read-write
File that contains the commands to be compared.
ignoredevicespecific
<Boolean>
Read-write
Suppress device specific differences.
weakpassword
<Boolean>
Read-write
Option to list all weak passwords (not adhering to strong password requirements). Takes config file as input, if no input specified, running configuration is considered. Command => query ns config -weakpassword / query ns config -weakpassword /nsconfig/ns.conf.
config
<String>
Read-write
configuration File to be used to find weak passwords, if not specified, running config is taken as input.
message
<String>
Read-only
.
mappedip
<String>
Read-only
Mapped IP Address of the System.
Minimum length = 1
range
<Double>
Read-only
The range of Mapped IP addresses to be configured.
Minimum value = 1
systemtype
<String>
Read-only
The type of the System. Possible Values: Standalone, HA, Cluster.
Possible values = Stand-alone, HA, Cluster
primaryip
<String>
Read-only
HA Master Node IP address.
flags
<Double>
Read-only
The flags for this entry.
lastconfigchangedtime
<String>
Read-only
Time when the configuration was last modified.
lastconfigsavetime
<String>
Read-only
Time when the configuration was last saved through savensconfig.
currentsytemtime
<String>
Read-only
current system time in date format.
systemtime
<Double>
Read-only
current system time.
configchanged
<Boolean>
Read-only
returns True if configuration has changed since last saved config.
response
<String>
Read-only
.

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

clear

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig?action=clear

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nsconfig":{
      "force":<Boolean_value>,
      "level":<String_value>,
      "rbaconfig":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nsconfig":{
      "ipaddress":<String_value>,
      "netmask":<String_value>,
      "nsvlan":<Double_value>,
      "ifnum":<String[]_value>,
      "tagged":<String_value>,
      "httpport":<Integer[]_value>,
      "maxconn":<Double_value>,
      "maxreq":<Double_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "cookieversion":<String_value>,
      "securecookie":<String_value>,
      "pmtumin":<Double_value>,
      "pmtutimeout":<Double_value>,
      "ftpportrange":<String_value>,
      "crportrange":<String_value>,
      "timezone":<String_value>,
      "grantquotamaxclient":<Double_value>,
      "exclusivequotamaxclient":<Double_value>,
      "grantquotaspillover":<Double_value>,
      "exclusivequotaspillover":<Double_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nsconfig":{
      "nsvlan":true,
      "ftpportrange":true,
      "crportrange":true,
      "timezone":true,
      "ipaddress":true,
      "netmask":true,
      "ifnum":true,
      "tagged":true,
      "httpport":true,
      "maxconn":true,
      "maxreq":true,
      "cip":true,
      "cipheader":true,
      "cookieversion":true,
      "securecookie":true,
      "pmtumin":true,
      "pmtutimeout":true,
      "grantquotamaxclient":true,
      "exclusivequotamaxclient":true,
      "grantquotaspillover":true,
      "exclusivequotaspillover":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

save

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig?action=save

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nsconfig":{
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

diff

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig?action=diff

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"nsconfig":{
      "config1":<String_value>,
      "config2":<String_value>,
      "outtype":<String_value>,
      "template":<Boolean_value>,
      "ignoredevicespecific":<Boolean_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Payload:

{ "nsconfig": [ {
      "response":<String_value>

}]}

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/nsconfig

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "nsconfig": [ {
      "ipaddress":<String_value>,
      "netmask":<String_value>,
      "mappedip":<String_value>,
      "range":<Double_value>,
      "nsvlan":<Double_value>,
      "ifnum":<String[]_value>,
      "tagged":<String_value>,
      "httpport":<Integer[]_value>,
      "maxconn":<Double_value>,
      "maxreq":<Double_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "cookieversion":<String_value>,
      "securecookie":<String_value>,
      "failover":<String_value>,
      "systemtype":<String_value>,
      "primaryip":<String_value>,
      "pmtumin":<Double_value>,
      "pmtutimeout":<Double_value>,
      "ftpportrange":<String_value>,
      "crportrange":<String_value>,
      "flags":<Double_value>,
      "timezone":<String_value>,
      "lastconfigchangedtime":<String_value>,
      "lastconfigsavetime":<String_value>,
      "currentsytemtime":<String_value>,
      "systemtime":<Double_value>,
      "grantquotamaxclient":<Double_value>,
      "exclusivequotamaxclient":<Double_value>,
      "grantquotaspillover":<Double_value>,
      "exclusivequotaspillover":<Double_value>,
      "configchanged":<Boolean_value>
}]}