Product Documentation

pqpolicy

Sep 07, 2016

Configuration for PQ policy resource.

Properties (click to see Operations)

Name Data Type Permissions Description
policyname
<String>
Read-write
Name for the priority queuing policy. Must begin with a letter, number, or the underscore symbol (_). Other characters allowed, after the first character, are the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), and colon (:) characters.
Minimum length = 1
rule
<String>
Read-write
Expression or name of a named expression, against which the request is evaluated. The priority queuing policy is applied if the rule evaluates to true.

Note:
* On the command line interface, if the expression includes blank spaces, the entire expression must be enclosed in double quotation marks.
* If the expression itself includes double quotation marks, you must escape the quotations by using the \ character.
* Alternatively, you can use single quotation marks to enclose the rule, in which case you will not have to escape the double quotation marks.
* Maximum length of a string literal in the expression is 255 characters. A longer string can be split into smaller strings of up to 255 characters each, and the smaller strings concatenated with the + operator. For example, you can create a 500-character string as follows: '"<string of 255 characters>" + "<string of 245 characters>"'.
priority
<Double>
Read-write
Priority for queuing the request. If server resources are not available for a request that matches the configured rule, this option specifies a priority for queuing the request until the server resources are available again. Enter the value of positive_integer as 1, 2 or 3. The highest priority level is 1 and the lowest priority value is 3.
Minimum value = 1
Maximum value = 3
weight
<Double>
Read-write
Weight of the priority. Each priority is assigned a weight according to which it is served when server resources are available. The weight for a higher priority request must be set higher than that of a lower priority request.
To prevent delays for low-priority requests across multiple priority levels, you can configure weighted queuing for serving requests. The default weights for the priorities
are:
* Gold - Priority 1 - Weight 3
* Silver - Priority 2 - Weight 2
* Bronze - Priority 3 - Weight 1
Specify the weights as 0 through 101. A weight of 0 indicates that the particular priority level should be served only when there are no requests in any of the priority queues.
A weight of 101 specifies a weight of infinity. This means that this priority level is served irrespective of the number of clients waiting in other priority queues.
Minimum value = 0
Maximum value = 101
qdepth
<Double>
Read-write
Queue depth threshold value. When the queue size (number of requests in the queue) on the virtual server to which this policy is bound, increases to the specified qDepth value, subsequent requests are dropped to the lowest priority level.
Default value: 0
Minimum value = 0
Maximum value = 4294967294
polqdepth
<Double>
Read-write
Policy queue depth threshold value. When the policy queue size (number of requests in all the queues belonging to this policy) increases to the specified polqDepth value, subsequent requests are dropped to the lowest priority level.
Default value: 0
Minimum value = 0
Maximum value = 4294967294
hits
<Double>
Read-only
Total number of hits.
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"pqpolicy":{
      "policyname":<String_value>,
      "rule":<String_value>,
      "priority":<Double_value>,
      "weight":<Double_value>,
      "qdepth":<Double_value>,
      "polqdepth":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy/policyname_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"pqpolicy":{
      "policyname":<String_value>,
      "weight":<Double_value>,
      "qdepth":<Double_value>,
      "polqdepth":<Double_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"pqpolicy":{
      "policyname":<String_value>,
      "weight":true,
      "qdepth":true,
      "polqdepth":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of pqpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?pagesize=#no&pageno=#no

Use this query-parameter to get the pqpolicy resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "pqpolicy": [ {
      "policyname":<String_value>,
      "rule":<String_value>,
      "priority":<Double_value>,
      "weight":<Double_value>,
      "qdepth":<Double_value>,
      "polqdepth":<Double_value>,
      "hits":<Double_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy/policyname_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy/policyname_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/pqpolicy/policyname_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "pqpolicy": [ {
      "policyname":<String_value>,
      "rule":<String_value>,
      "priority":<Double_value>,
      "weight":<Double_value>,
      "qdepth":<Double_value>,
      "polqdepth":<Double_value>,
      "hits":<Double_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/pqpolicy?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "pqpolicy": [ { "__count": "#no"} ] }