Product Documentation

vpnalwaysonprofile

Sep 08, 2016

Configuration for AlwyasON profile resource.

Properties (click to see Operations)

Name Data Type Permissions Description
name
<String>
Read-write
name of AlwaysON profile.
Minimum length = 1
networkaccessonvpnfailure
<String>
Read-write
Option to block network traffic when tunnel is not established(and the config requires that tunnel be established). When set to onlyToGateway, the network traffic to and from the client (except Gateway IP) is blocked. When set to fullAccess, the network traffic is not blocked.
Default value: fullAccess,
Possible values = onlyToGateway, fullAccess
clientcontrol
<String>
Read-write
Allow/Deny user to log off and connect to another Gateway.
Default value: DENY
Possible values = ALLOW, DENY
locationbasedvpn
<String>
Read-write
Option to decide if tunnel should be established when in enterprise network. When locationBasedVPN is remote, client tries to detect if it is located in enterprise network or not and establishes the tunnel if not in enterprise network. Dns suffixes configured using -add dns suffix- are used to decide if the client is in the enterprise network or not. If the resolution of the DNS suffix results in private IP, client is said to be in enterprise network. When set to EveryWhere, the client skips the check to detect if it is on the enterprise network and tries to establish the tunnel.
Default value: Remote
Possible values = Remote, Everywhere
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"vpnalwaysonprofile":{
      "name":<String_value>,
      "networkaccessonvpnfailure":<String_value>,
      "clientcontrol":<String_value>,
      "locationbasedvpn":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile/name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"vpnalwaysonprofile":{
      "name":<String_value>,
      "networkaccessonvpnfailure":<String_value>,
      "clientcontrol":<String_value>,
      "locationbasedvpn":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"vpnalwaysonprofile":{
      "name":<String_value>,
      "networkaccessonvpnfailure":true,
      "clientcontrol":true,
      "locationbasedvpn":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vpnalwaysonprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?pagesize=#no&pageno=#no

Use this query-parameter to get the vpnalwaysonprofile resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "vpnalwaysonprofile": [ {
      "name":<String_value>,
      "networkaccessonvpnfailure":<String_value>,
      "clientcontrol":<String_value>,
      "locationbasedvpn":<String_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile/name_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "vpnalwaysonprofile": [ {
      "name":<String_value>,
      "networkaccessonvpnfailure":<String_value>,
      "clientcontrol":<String_value>,
      "locationbasedvpn":<String_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/vpnalwaysonprofile?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "vpnalwaysonprofile": [ { "__count": "#no"} ] }