Product Documentation

CLI ERRORS

Sep 08, 2016

CLI ERRORS

Error Code Error Code(Decimal) Error Code(Hex) Error Message
NSERR_TCPCONNFAIL
1024
0x400
Connection failed
NSERR_LOGINFAIL
1025
0x401
Login failed
NSERR_NOLOGIN
1026
0x402
Not logged in
NSERR_AUTHTIMEOUT
1027
0x403
Not logged in or connection timed out
NSERR_NOT_PRIMARY
1028
0x404
You are connected to a secondary node; configuration changes made in this session will not be propagated to, or saved on, other nodes
NSERR_REMOTEOP
1029
0x405
Operation cannot be performed from remote login
NSERR_CONNLOST
1030
0x406
Connection with NetScaler lost
NSERR_RPCDATAMISMATCH
1031
0x407
Communication error (RPC data-size mismatch)
NSERR_RPCBADREPLY
1032
0x408
Communication error (bad RPC reply)
NSERR_UNABLETOPROMPT
1033
0x409
Unable to display secondary prompt
NSERR_LOGIN_CHALLENGED
1034
0X40A
Login challenged
NSERR_LOGOUT_SAVE
1035
0X40B
You are leaving without saving changes. Save changes now (Y/N)? [N]:
NSERR_CLEAR_CONFIG
1036
0X40C
Are you sure you want to clear the configuration(Y/N)? [N]:
NSERR_REBOOT
1037
0X40D
Are you sure you want to restart NetScaler (Y/N)? [N]:
NSERR_SHUTDOWNNS
1038
0X40E
Are you sure you want to completely stop NetScaler (Y/N)? [N]:
NSERR_REBOOT_SAVE
1039
0X40F
Configuration not Saved. Are you sure you want to restart NetScaler (Y/N)? [N]:
NSERR_USERABORT
1040
0x410
User requested abort
NSERR_EOF
1041
0x411
EOF
NSERR_INTERRUPT
1042
0x412
Interrupted
NSERR_INTERNAL
1043
0x413
Internal error
NSERR_NOT_CLIP
1044
0x414
You are connected to NSIP of a cluster node; configuration changes made in this session will not be propagated to, or saved on, other cluster nodes
NSERR_EULA_NOTACCEPTED
1045
0x415
End User License Agreement not accepted. Login from CLI/GUI to accept it.
NSERR_STRMAXLEN_255
1048
0x418
String length exceeds maximum. Allowed maximum length is 255 bytes.
NSERR_STRMAXLEN_32
1049
0x419
String length exceeds maximum. Allowed maximum length is 32.
NSERR_NOPREFIX_LENGTH
1050
0x41A
Prefix length must be given with network
NSERR_INVALIDPOLLVAL
1051
0x41B
Minpoll value should not be greater than maxpoll
NSERR_SHELL_ACCESS
1052
0x41C
User has shell access
NSERR_NORESPONSE
1056
0x420
No response from NetScaler
NSERR_IOERROR
1057
0x421
I/O error
NSERR_ENV
1058
0x422
Environment error
NSERR_CMDSFAILED
1059
0x423
Some commands failed
NSERR_ALLCMDSFAILED
1060
0x424
All commands failed
NSERR_INTMINVAL_CLT_IDLETIMEOUT
1061
0x425
Integer value below minimum for client idle timeout.
NSERR_INTMINVAL_SRV_IDLETIMEOUT
1062
0x426
Integer value below minimum for server idle timeout.
NSERR_INVALID_TCP_OPTION_TYPE
1063
0x427
Invalid tcp option type value. Allowed type values are 0 to 254
NSERR_LICEXPIRED
1066
0x42A
Features(s) license expired
NSERR_FEATDISABLED
1067
0x42B
Feature(s) not enabled
NSERR_MAXLIMIT
1072
0x430
Maximum resource limit reached
NSERR_SET_NOSUPPORT
1073
0x431
Set operation not supported
NSERR_INVALIDVALUE
1074
0x432
Invalid value
NSERR_INVALIDNAME
1075
0x433
Invalid name; names must begin with an alphanumeric character or underscore and must contain only alphanumerics, '_', '#', '.', ' ', ':', '@', '=' or '-'
NSERR_INVALIDPASSWORD
1076
0x434
Invalid password. Password must contain atleast one lower case character, one upper case character, one numeric character and one special character when strong password is enabled.
NSERR_INVALIDMINPASSWORDLENGTH
1077
0x435
Minimum password length should be greater than or equal to 4 when strong password is enabled
NSERR_ENABLINGPASSWORDCOMPLEXITY
1078
0x436
Strong Password now enabled. Please ensure all the existing user passwords adhere to this restriction. Minimum Password Length is set to 4 as default.
NSERR_INVALIDPASSWORDLENGTH
1079
0x437
Password length should adhere to minimum password length value in system parameter settings.
NSERR_CANNOTSETMINPASSWORDLENGTH
1080
0x438
Strong Password needs to be enabled to set the Minimum Password Length value.
NSERR_NOSUCHCMD
1088
0x440
No such command
NSERR_CMDAMBIGUOUS
1089
0x441
Ambiguous command name
NSERR_NOSUCHARG
1090
0x442
No such argument
NSERR_ARGVALMISSING
1091
0x443
Required argument value missing
NSERR_ARGSMUTEX
1092
0x444
Arguments cannot both be specified
NSERR_ARGPREREQ
1093
0x445
Argument pre-requisite missing
NSERR_ARGSTOOFEW
1094
0x446
Too few arguments
NSERR_ARGMISSING
1095
0x447
Required argument missing
NSERR_ARGORDER
1096
0x448
Argument(s) out of order
NSERR_ARGVALBAD
1097
0x449
Invalid argument value
NSERR_ARGVALSEQ
1098
0x44A
Arguments cannot have the same value
NSERR_ARGAMBIGUOUS
1099
0x44B
Ambiguous argument name
NSERR_SYNCGSLBCONFIG
1100
0x44C
Please confirm whether you want to sync-config (Y/N)? [N]:
NSERR_SYNCGSLBCONFIG_WARN
1101
0x44D
GSLB configuration will be removed from the slave site and reapplied. Syncing the GSLB configuration might cause configuration loss on other sites and also traffic disruptions might occur during this process.
NSERR_ARGVALSNEQ
1104
0x450
Arguments must have the same value
NSERR_ARGVALAMBIGUOUS
1105
0x451
Ambiguous argument value
NSERR_STRMAXLEN
1106
0x452
String length exceeds maximum
NSERR_STRMINLEN
1107
0x453
String too short
NSERR_INTMAXVAL
1108
0x454
Integer value exceeds maximum
NSERR_INTMINVAL
1109
0x455
Integer value below minimum
NSERR_INVALIDIP
1110
0x456
Invalid IP address
NSERR_INVALIDNETMASK
1111
0x457
Invalid netmask
NSERR_TOOMANYVALS
1112
0x458
Argument has too many values
NSERR_BADRANGE
1113
0x459
Range minimum exceeds range maximum
NSERR_EXPRQUOTES
1114
0x45A
Expression must be enclosed in quotes
NSERR_BADQUOTES
1115
0x45B
Unmatched quote
NSERR_INVALIDRANGE
1116
0x45C
Invalid range specification
NSERR_MISMATCHRANGES
1117
0x45D
Ranges are different sizes
NSERR_MULTIRANGES
1118
0x45E
Only one range allowed per argument
NSERR_NOMATCHCHAR
1119
0x45F
Unmatched character
NSERR_NEEDREBOOT
1120
0x460
The configuration must be saved and the system rebooted for these settings to take effect
NSQ_SAVECONFIG
1121
0x461
Do you want to save the new configuration?
NSERR_NOTSAVED
1122
0x462
The configuration changes were not saved - they will be lost on the next reboot
NSERR_CMDEXEC
1123
0x463
Error(s) occurred - some or all changes may not be applied
NSQ_REBOOT
1124
0x464
Do you want to reboot the system now?
NSERR_NOREBOOT
1125
0x465
The configuration changes will not take effect until the system is rebooted
NSERR_PGMFAILED
1126
0x466
External program failed
NSERR_CTXMODE
1127
0x467
Contextual CLI mode
NSERR_CMDINCOMPLETE
1128
0x468
Incomplete command
NSERR_CMDOUTOFCTX
1129
0x469
Command not valid here
NSERR_CONFIGSAVED
1130
0x46A
The running configuration has been saved
NSERR_CONFIGCLEARED
1131
0x46B
The running configuration has been cleared
NSERR_REBOOTING
1132
0x46C
NetScaler is rebooting now
NSERR_NOCONFIGSAVE
1133
0x46D
The running configuration has not changed
NSERR_REGEXNOANCHOR
1135
0x46F
First character of regular expression must be '^'
NSERR_REGEXNOMATCH
1136
0x470
Regular expression does not match
NSERR_REGEXINVALID
1137
0x471
Invalid regular expression
NSERR_REGEXNOTALLOWED
1138
0x472
Regular expression not allowed
NSERR_REGEXNOCMD
1139
0x473
No matches
NSERR_INVALIDIPV6_FORMAT
1140
0x474
Invalid IPv6 address
NSERR_INVALIDIPV6_TWO_DOUBECOLON
1141
0x475
Double-colon can appear only once in an IPv6 address
NSERR_INVALIDIPV6_NOPREFIX_LENGTH
1142
0x476
Prefix length must be given with an IPv6 address
NSERR_INVALIDIPV6_PREFIX_VALUE
1143
0x477
Prefix length must be in the range of 0-128
NSERR_TERMNAMEINVALID
1144
0x478
Invalid term name
NSERR_TERMINVALID
1145
0x479
Invalid syntax in term
NSERR_FORCEFAILOVER
1146
0x47a
Please confirm whether you want force-failover (Y/N)? [N]:
NSERR_FORCEFAIL_HEALTH_WARN
1147
0x47b
Force Failover may cause configuration loss, peer health not optimum. Reason(s):
NSERR_HELLOTIME_MULTIPLE
1148
0x47c
Invalid value. Hellotime Interval must be a multiple of 200
NSERR_FORCESYNCSAVE
1149
0x47d
Do you want to save the config after sync (Y/N)? [Y]:
NSERR_ERROUTFILENAME
1150
0x47e
Character '/' not allowed in outfilename
NSERR_RNATIPDEL
1151
0x47f
address is bound to rnat config, can not be removed
NSERR_INVALIDALIAS
1152
0x480
Invalid alias
NSERR_NOSUCHALIAS
1153
0x481
No such alias
NSERR_ALIASEXISTS
1154
0x482
Alias already exists
NSERR_NOSUCHFILE
1155
0x483
No such file
NSERR_NOTREGFILE
1156
0x484
Not a file
NSERR_DEPRCMD
1157
0x485
Command deprecated
NSERR_DEPRARG
1158
0x486
Argument deprecated
NSERR_NOTLOGFILE
1159
0x487
Not a NetScaler log file
NSERR_NOPLENFORIPV6RANGE
1160
0x488
Prefix length cannot be specified for an IPv6 range
NSERR_INVALIDINT
1161
0x489
Integer not in range
NSERR_CMDAMBIGUOUS_USECOMPLETIONSOPTIONS
1162
0x48A
Ambiguous (use cmd completion for options)
NSERR_METADATA_INVAL_ENTITYTYPE
1163
0x48B
Invalid Entity Type
NSERR_SETNOTEXIST
1164
0x48C
set operation does not exist
NSERR_SETARGNOTEXIST
1165
0x48d
set operation for one of the modified argument does not exist
NSERR_INVALID_DS
1166
0x48e
Invalid datasource
NSERR_NOSUCHCOUNTER
1167
0x48F
No such counter
NSERR_INVALIDIPMASK
1168
0x490
Invalid IP address mask
NSERR_INVALIDIPPAT
1169
0x491
Invalid IP address pattern
NSERR_BADRC
1170
0x492
Unexpected return code
NSERR_INVALIDRANGETYPE
1171
0x493
Inappropriate range values for value type
NSERR_INVALIDRANGEVAL
1172
0x494
Invalid range value
NSERR_INVALIDIPV6_PREFIX_LENGTH
1173
0x495
Prefix length must not be given
NSERR_ENTITYDELETE_FAIL
1174
0x496
Can not delete active entity
NSERR_DONE
1175
0X497
This is the last result
NSERR_RNATIPDEL2
1176
0x498
An RNAT address requires an IP address to exist
NSERR_INCOMPATIBLEIP
1181
0x49d
Private IP and public IP must be either IPv4 or IPv6
NSERR_TRANSCR_IP
1182
0x49e
For transparent CR vserver, you cannot specify IP address
NSERR_PASSWORD_MISMATCH
1183
0x49f
Passwords entered do not match
NSERR_LEADING_TRAILING_SPACES
1053
0x41d
Leading or Trailing spaces in string
NSERR_SAVENOTDONE
1054
0x41e
The running configuration is not saved
NSERR_INVALIDIP_VSVRTYPE
1178
0x49a
Invalid IP address or Vserver Type
NSERR_HELLOTIME_DEADINTERVAL_COMBINATION
1177
0x499
The Hello Interval must be set to 200 msec when dead interval is less than 3 sec
NSERR_MAXSESSION
1179
0x49b
Maxsession cannot be set for this user
NSERR_NEEDREPLICATE
1180
0x49c
This command will not be propagated to the other cluster nodes as you are connected to the NSIP of this cluster node