Product Documentation

CLUSTER ERRORS

Sep 08, 2016

CLUSTER ERRORS

Error Code Error Code(Decimal) Error Code(Hex) Error Message
NSERR_CLNOTEXIST
2448
0x990
Cluster does not exist
NSERR_TOOMANYCLS
2449
0x991
This node is already added to another cluster
NSERR_RMLOCALNODE
2450
0x992
Local Node cannot be deleted
NSERR_BKPLANEENABLED
2451
0x993
Cluster Backplane is enabled on this interface
NSERR_LOCALNODE_NOTCONFIGURED
2452
0x994
Clustering cannot be enabled as the local node is not a member of the cluster.
NSERR_HACL_CANNOT_COEXIST
2453
0x995
Clustering and HA cannot coexist.
NSERR_CLACPKEYNOTCRT
2454
0x996
LACP key for Node/cluster is not correct
NSERR_CLNODE_EXIST
2455
0x997
already in cluster
NSERR_BKPLANEDISABLED
2456
0x998
Disabling Cluster backplane interface
NSERR_CLAGTHROUGHPUT
2457
0x999
Currently throughput settings are not allowed on CLAG
NSERR_LICMISMATCH
2458
0x99A
License mismatch between Configuration Coordinator and local node
NSERR_CLIP_INVALIDNETMASK
2459
0x99B
CLIP netmask should be 255.255.255.255.
NSERR_BKPLANELACPDELETE
2460
0x99C
This is the last interface in LACP channel configured as backplane
NSERR_LINKSETMEMBER
2461
0x99D
Interface/Channel is Linkset member.
NSERR_CONFIG_PARAM
2462
0x99E
Setting up of netscaler parameter ignored using this command in HA/Cluster mode. Use 'set nsparam' command for this purpose.
NSERR_CLIP_INVALIDPREFIXLEN
2463
0x99F
CLIP prefix length should be 128.
NSERR_CLUSTER_L2NOTSUPP
2464
0x9A0
L2 Mode not supported in Cluster mode.
NSERR_LINKSET_ONEPERNODE
2465
0x9A1
Linkset can have only one Interface/Channel per Node
NSERR_LINKSET_NOTBOUND
2466
0x9A2
Interface/Channel not bound to Linkset
NSERR_LINKSET_IDINVALID
2467
0x9A3
Linkset name should be of form LS/
NSERR_CLUSTER_NBNOTSUPP
2468
0x9A4
CloudBridge is not supported in Cluster mode.
NSERR_CLUSTER_VPNNOTSUPP
2469
0x9A5
SSLVPN is not supported in Cluster mode.
NSERR_CLUSTER_AAANOTSUPP
2470
0x9A6
AAA is not supported in Cluster mode.
NSERR_CLUSTER_IPSECNOTSUPP
2471
0x9A7
IPSEC is not supported in Cluster mode.
NSERR_LINKSET_LAMEMBER
2472
0x9A8
Interface part of a Channel
NSERR_CLIP_LOCALNODE_NOTCONFIGURED
2473
0x9A9
CLIP cannot be added as the local node is not a member of the cluster.
NSERR_CLVERSIONMISMATCH
2474
0x9AA
Cluster version mismatch between Configuration Coordinator and local node
NSERR_CLUSTER_CMNOTSUPP
2475
0x9AB
Connection Mirroring is not supported in Cluster mode
NSERR_ARP_CLAG_OWNERNODE_MANDATORY
2476
0x9AC
Owner Node should be specified for CLAG.
NSERR_ARP_OWNERNODE_MANDATORY
2477
0x9AD
Owner Node should be specified.
NSERR_NOOPCCO
2478
0x9AE
Operation not permitted on the Configuration Coordinator.
NSERR_SPOTTED_CONFIG_PRESENT
2479
0x9AF
Operation not permitted as the node is part of spotted entity configuration.
NSERR_NOT_CLUSTER_IP
2480
0x9B0
IP address should be a CLIP address.
NSERR_CLUSTER_NNRES
2481
0x9B1
Error in communication with other nodes in the cluster
NSERR_LAST_CLUSTER_IP_REMOVAL
2482
0x9B2
A NetScaler cluster must have a minimum of one cluster IP address. This is the last available cluster IP address and hence it cannot be deleted.
NSERR_CONFIG_PARAM_INVALID
2483
0x9B3
Configured Param(s) too small for Cluster. Parameter value(s) will be bumped to OVS node count.
NSERR_CLUSTER_INVALIDNODE
2484
0x9B4
Owner node value should be between 0 and 31, both inclusive.
NSERR_LRONCLACPONLY
2485
0x9B5
Link Redundancy can be set only in Cluster LACP Channels
NSERR_MULTIBIND_NOT_SUPPINCLUSTER
2486
0x9B6
Multiple Bindings in Single Bind Command not Supported in Cluster.
NSERR_CLUSTER_FISNAMES_DUPNOTALLOWED
2487
0x9B7
In a cluster setup, the FIS name on each node must be unique.
NSERR_CLUSTER_CLAG_NOLOCALINTF
2488
0x9B8
CLA cannot be bound to the FIS as the CLA does not contain a local interface.
NSERR_FIS_MAX_LIMIT
2489
0x9B9
An appliance can have a maximum of 64 failover interface sets (FIS). This appliance or ownernode (cluster) already has maximum number of allowable FIS.
NSERR_BOUND_TO_FIS
2490
0x9BA
Interface bound to FIS.
NSERR_CHANNEL_OPEN_FAILED
2491
0x9BB
Unable to open channel
NSERR_NOT_BOUND_TO_FIS
2492
0x9BC
Interface not bound to this FIS
NSERR_CLUSTER_INC_NOTSUPP
2493
0x9BD
Feature not supported when cluster is configured in INC mode
NSERR_CONFIG_NG_CHANGED
4095
0xfff
Config NodeGroup changed, force cluster sync should be fired on newly added node to be in sync
NSERR_STRIPED_IP_EXIST
2494
0x9BE
Striped SNIPs/MIPs must be removed when transitioning to cluster-inc
NSERR_WRONG_NG
2495
0x9BF
All cluster nodes should be bound to DEFAULT_NG before transitioning to cluster-inc
NSERR_NG_REQUIRED
2496
0x9C0
The nodegroup parameter is mandatory when the -inc parameter is enabled
NSERR_NG_CHANGE
2497
0x9C1
NodeGroup can be changed only for transition from cluster to cluster-inc
NSERR_NG_INVALID
2498
0x9C2
Invalid nodegroup
NSERR_NOT_LAST_NODE
2499
0x9C3
The -flushall parameter can be enabled only when there is one node in the nodegroup
NSERR_MULTI_NG_BINDING_EXIST
2500
0x9C4
More than one Nodegroup has nodes bound to it
NSERR_INVALID_NC_CONFIG
2501
0x9C5
The owner group parameter is applicable only when the INC parameter is enabled on the cluster instance
NSERR_FIPSCL_CANNOT_COEXIST
2502
0x9C6
Clustering and FIPs configuration cannot coexist.
NSERR_LS_CLAG_INTF_SAME_NG
2503
0x9C7
All interfaces of LinkSet/CLAG should belong to same nodegroup
NSERR_NODE_BINDING_INC
2504
0x9C8
Node cannot be bound to Default nodeGroup on cluster-inc setup
NSERR_INVALID_LS
2411
0x96b
Invalid linkset
NSERR_IP_ALREADY_OWNED
2541
0x9ed
Cannot add ip address as the address is already owned by cluster or peer node
NSERR_LS_UNABLE_GET_VLAN
2542
0x9ee
Unable to get the current vlan of this linkset.
NSERR_LS_NOT_BOUND_VLAN
2543
0x9ef
Linkset not a member of this vlan