Product Documentation

INTF ERRORS

Sep 08, 2016

INTF ERRORS

Error Code Error Code(Decimal) Error Code(Hex) Error Message
NSERR_1GSFPSPEEDLIMIT
3968
0xf80
1G SFP's are restricted to speed 1000 or AUTO only
NSERR_1GSFPDUPLEXLIMIT
3969
0xf81
1G SFP's are restricted to duplex FULL or AUTO only
NSERR_1GSPEEDLIMIT
3970
0xf82
1G port can not be configured as 10G speed
NSERR_1GDUPLEXLIMIT
3971
0xf83
1G port can not be configured as HALF duplex
NSERR_10GSPEEDLIMIT
3972
0xf84
10G ports on this platform can only be configured as speed 1G, 10G or AUTO only
NSERR_10GDUPLEXLIMIT
3973
0xf85
10G ports on this platform can only be configured as duplex FULL or AUTO only
NSERR_10GAUTONEGLIMIT
3974
0xf86
10G ports on this platform do not support AUTONEG
NSERR_10GSPEEDONLY
3975
0xf87
10G ports on this platform are restricted to speed 10000 or AUTO only
NSERR_FULLDUPLEXONLY
3976
0xf88
These ports do not support HALF duplex mode
NSERR_AUTOINVALSPEED
3977
0xf89
Static CLAG does not support speed as AUTO
NSERR_CLAGSPEEDREQ
3978
0xf8a
Static CLAG explicitly requires speed to be configured other than AUTO
NSERR_THROUGHPUTLIMIT
3979
0xf8b
Throughput limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps
NSERR_BANDWIDTHLIMIT
3980
0xf8c
Bandwidth limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps
NSERR_10GDAC_SPEEDLIMIT
3981
0xf8d
DAC port speed must be configured as 10G or AUTO
NSERR_VIF_LACP_CAUTION
3982
0xf8e
Dynamic LA works in only pass-through interface mode.
NSERR_LA_SLAVE_LIMIT
3983
0xf8f
Trying to bind more interfaces than allowed limit
NSERR_SLAVE_MTU_MISMATCH
3987
0xf93
Interface MTU should be same as Channel MTU.
NSERR_BKPLANE_MTU_MISMATCH
3988
0xf94
Interface MTU should be default or same as Backplane MTU.
NSERR_MTU_NOTALLOWED
3989
0xf95
MTU change is not allowed on this interface.
NSERR_BACKPLANE_MTU_LIMIT
3990
0xf96
Backplane Interface, Minimum user configured value for MTU is 1578.
NSERR_INTERFACE_SLAVE_MTU_LIMIT
3991
0xf97
Interface is a part of channel, MTU change is not allowed.
NSERR_PTP_CLUS_L3
3992
0xf98
Cluster INC Mode Enabled, PTP state change is not allowed.
NSERR_40GDUPLEXLIMIT
3993
0xf99
40G ports on this platform can only be configured as duplex FULL or AUTO only
NSERR_40GSPEEDONLY
3994
0xf9a
40G ports on this platform are restricted to speed 40000 or AUTO only
NSERR_LRSET_FC_NOT_ALLOWED
3996
0xf9c
Flow Controle settings not allowed for link redundant set interface
NSERR_LRSET_LACP_SET_NOT_ALLOWED
3997
0xf9d
Dynamic LA(LACP) settings are not allowed for link redundant set interface
NSERR_LRSET_LLDPSET_NOT_ALLOWED
3998
0xf9e
LLDP settings are not allowed for link redundant set interface
NSERR_LRSET_SPEED_NOT_ALLOWED
3999
0xf9f
speed setting not allowed for link redundant set interface
NSERR_LRSET_PRIORITY_NOT_ALLOWED
4026
0xfba
lrset priority not allowed for link redundant set master interface
NSERR_LRSET_THROUGHPUT_NOT_ALLOWED
4027
0xfbb
throughput setting not allowed for link redundant set master interface
NSERR_LRSET_BW_SET_NOT_ALLOWED
4028
0xfbc
Bandwidth settings are not allowed for link redundant set interface
NSERR_LRSET_LAG_TYPE_NOT_ALLOWED
4029
0xfbd
Lagtype setting not allowed for link redundant set interface
NSERR_LRSET_DUPLEX_NOT_ALLOWED
4030
0xfbe
Duplex setting not allowed for link redundant set interface
NSERR_LRSET_AUTO_NEG_NOT_ALLOWED
4031
0xfbf
Disabling autonegotiation not allowed for link redundant set interface
NSERR_JF_ESX_VERSION_SUPPORT
4070
0xfe6
Jumbo Frames are supported on ESX 5.5 version and onward
NSERR_TP_SETTINGS_NOT_ALLOWED
3385
0xd39
Trunk Port settings on this interface is not supported
NSERR_LACP_SETTINGS_ON_TP_NOT_ALLOWED
3386
0xd3a
LACP settings on Trunk Port is not allowed